Instruction Manual for MyShop Solaire models including: UV V3.1 Universal Easy Solar Bracket, UV V3.1, Universal Easy Solar Bracket, Easy Solar Bracket, Solar Bracket
EasySupport : Support Universel pour Panneaux Solaires - Sol, Mur, Balcon
INSTALLATION MANUAL INSTALLATIONSANLEITUNG Universal Easy Solar Bracket-UV V3.1 Universelle einfache Solarhalterung-UV V3.1 6&(89 INSTALLATION INSTRUCTIONS 1.Installation tools 1.Werkzeuge für die Installation x 1 x 2 Bolt for Inverter Bolzen für Wechselrichter x 2 Hooks Geländerhaken x 4 Allen Key 6mm .)FYBHPO4PDLFU4DSFX Inbusschlüssel 6mm Tape Meßband 13mm Spanner 13mm Schraubenschlüssel 2.Packaging and details (Accessories are subject to the actual product) 2.Verpackung und Details ( Die Zubehörteile sind vom tatsächlichen Produkt abhängig) x 2 Bottom fasteners Aluminium-Klemmplatte für Geländer Expansion bolts Spreizschrauben Tripods I Stative 01 02 3.Installation Instruction 3.Montage 3.1 Take the tripod out and unfold it 3.1 Das Stativ herausnehmen und ausklappen 3.3 Align the scale by adjusting the insertion depth of L026, adjust the angle and lock it 3.3 Stellen Sie die Einstecktiefe von L026 ein, richten Sie die Skala aus, stellen Sie den Winkel ein und verriegeln Sie ihn; 3.2 Insert one end of the column with scale marks (L026) into the other square tube(L025); 3.2 Drehen Sie das Stativ, und stecken Sie das Ende der Säule mit den Skalenmarkierungen (L026) in das andere Vierkantrohr (L025); 3.4 Repeat steps 3.2-3.4 to assemble another set of tripod 3.4 Wiederholen Sie die Schritte 3.2-3.4, um ein anderes Stativset zu montieren. 03 04 3.5 If the balcony railing accessories are needed, SR-0068 should be installed on the crossbar first, as shown in the picture; 3.5 Wenn Sie Zubehör für Balkonhalterungen benötigen, müssen Sie zuerst SR-0068 an der Querstange installieren, wie in der Abbildung gezeigt. 3.7 Install the inverter 3.7 DInstallation des Wechselrichters 3.6 Install the pillars 3.6 Montage der Querstange 4-M8x45 05 Micro-inverter Mikro-Wechselrichter 3.8 Install the end clamp 3.8 Montage der Endklemme The M8x30 bolt of he end clamp needs to be inserted onto the hole of the rail Die M8x30 Schraube der Endklemme muss in das Loch eingeführt werden. 06 3.9 Place the bracket on the flat ground. The installation is complete. 3.9 Die Halterung auf den ebenen Boden stellen. Die Installation ist abgeschlossen. 4.Balcony scene 4.Balkonszene 4.1Hook Detail: 4.1Detailzeichnung des Geländerhakens: M8x80 2-M8x50 07 08 4.2 Bottom fastener detail: 4.2 Detailzeichnung der Aluminium-Klemmplatte für Geländer 5.Wall scene ( If necessary ) 5.Wandszene ( Falls benötigt ) 2-M8x50 09 Expansion bolt Spreizschraube 10Adobe PDF library 16.07 Adobe Illustrator 27.0 (Windows)