MTD Model Series 560 Lawnmower Parts List and Exploded View Diagram
Exploded View Diagram
This document provides a detailed parts list and an exploded view diagram for the MTD Model Series 560 lawnmower. The diagram visually represents the assembly of the lawnmower, showing the arrangement of various components such as the upper and lower handles, engine, wheels, deck, grass bag assembly, and blade.
IMPORTANT: For a proper working machine, use Factory Approved Parts. V-BELTS are specially designed to engage and disengage safely. A substitute (non OEM) V-Belt can be dangerous by not disengaging completely.
Parts List
Ref. No. | Part No. | Description |
---|---|---|
1 | 747-1214 | Lower Bail Handle |
2 | 710-0599 | TT Screw 1/4-20 x 0.5 |
3 | 736-0270 | Bell Washer.265 x 0.75 |
4 | 17032A | Deflector Chute Adapter |
5 | 732-1014 | Torsion Spring |
6 | 731-2626+ | Deluxe Bail Cover |
7 | 747-1161A | Blade Control Handle |
8 | 749-1092A | Upper Handle |
9 | 731-04177 | Chute Deflector |
10 | 687-02055 | Mulch Plug Complete |
11 | 747-0710 | Hinge Pin |
12 | 732-0708 | Bearing Retainer |
13 | 720-0279 | Handle Knob |
14 | 720-0284 | Handle Knob |
15 | 710-1205 | Eye Bolt |
16 | 746-1113 | Control Cable - 37.75" |
746-1132 | Control Cable - 40.75" | |
746-1141 | Control Cable - 58.25" | |
17 | 710-1174 | Carriage Bolt 5/16-18 x 2.0 |
18 | 687-02033 | RH Handle Bracket |
687-02031 | LH Handle Bracket | |
19 | 726-0240 | Cable Tie |
20 | 714-0104 | Cotter Pin |
21 | 710-1008 | Self-Tapping Sems Screw |
22 | 746-04112 | Drive Cable - 50.50" |
23 | 664-04007 | Grassbag Assembly |
24 | 710-1650 | Shoulder Screw # 12-24 |
25 | 631-0075B | Engine Spacer |
26 | 741-0604A | Bearing Sleeve |
27 | 748-0355 | Bearing Support |
28 | 787-01106 | 21" Deck |
29 | 782-5003 | LH Rear Baffle |
30 | 710-1017 | Screw AB: 1/4-14:.625 |
31 | 782-5004A | RH Rear Baffle |
32 | 710-0216 | Hex Screw 3/8-16 x.75 |
33 | 732-04090 | Torsion Spring RH |
34 | 712-0431 | Flange Lock Nut 3/8-16 |
35 | 731-04585 | Transmission Cover (Gray) |
36 | 782-5002A | Front Baffle |
37 | 754-0637A | V-Belt |
38 | 736-0447 | Wave Washer |
39 | 750-04178 | Sleeve Spacer 9.04" Lg. |
40 | 748-04015A | Blade Adapter w/ Pulley |
41 | 742-0741 | 21" Mulching Blade |
42 | 736-0524A | Blade Bell Support |
43 | 687-02044 | Pivot Plate Assembly |
44 | 710-1257 | Hex Screw 3/8-24 x 2.50 |
45 | 749-0928A | Lower Handle |
47 | 720-0426 | Adjustment Knob |
48 | 732-04089 | Torsion Spring LH |
49 | 734-2042 | Wheel 8 x 2.125 |
50 | 716-0865 | Snap Ring |
51 | 717-1762 | Gear 14T RH FWD |
717-1761 | Gear 14T LH FWD * | |
52 | 747-04080 | Grass Bag Frame |
53 | 736-0451 | Saddle Washer |
54 | 712-3005 | Hex Flange Lock Nut 3/8-16 |
55 | 710-1652 | TT Scr. w/Washer 1/4-20 x.625 |
56 | 687-02056 | RH Handle Bracket Assembly |
687-02057 | LH Handle Bracket Assembly | |
57 | 715-0221 | Dowel Pin |
58 | 736-0474 | Washer |
59 | 687-02039 | Pivot Arm Assembly - RH |
687-02040 | Pivot Arm Assembly - LH | |
60 | 732-0866 | Rear Spring Lever |
61 | 720-0312 | Foam Grip |
62 | 738-0507B | Shoulder Scr.500 Dia. x.434 |
63 | 734-04093 | Wheel, 12 x 2.125 |
64 | 782-0512B | Height Adjuster Plate - RH |
782-0511A | Height Adjuster Plate - LH* | |
65 | 732-0706 | Front Lever - RH |
732-0707 | Front Lever - LH* | |
66 | 732-0700 | Wire |
67 | 731-1236 | Rear Trailing Shield |
68 | 747-0996 | Pivot Rod |
69 | 716-0102 | Snap Ring |
70 | 731-04134 | Rear Discharge Door |
75 | 782-7551 | Wheel Dust Cap |
76 | 756-04017 | Input Pulley |
77 | 750-04162 | Spacer.375 x.50 x 1.02" Lg. |
78 | 715-04011 | Roll Pin |
79 | 710-0703 | Carriage Bolt 1/4-20 |
80 | 712-0397 | Wing Nut |
81 | 618-0657 | Transmission Assembly |
82 | 732-1043 | Belt Tension Spring |
83 | 750-1166 | Slev. Spacer 2.1" Lg. |
88 | 682-0512A | Height Adjustment Assembly RH |
682-0511A | Height Adjustment Assembly LH* | |
89 | 731-0981A | Hub Cap (If Equipped) |
* Not shown in illustration
† If Equipped