PawHut Pet Stroller D00-164V00
Model: D00-164V00
Important Information
WARNING: Keep Away From Fire
- Please read this instruction carefully before use and keep it properly for future reference. If you do not follow this instruction, the safety of pets may be affected.
- Do not leave the caregiver while the product is in use.
- Do not use accessories not provided by the manufacturer.
- Any load attached to the handle will affect the stability of the pet stroller.
- Ensure that all the locking devices are assembled before using the pet stroller.
- Pets must use restraints when using.
- Do not use the pet stroller in rough areas, near stoves and other dangerous areas.
- Avoid use or storage in damp, cold or high temperature environment and keep away from fire or strong heat source.
- Do not use it to put dangerous animals which are aggressive and destructive.
Maintenance and Care
Please check and maintain the pet stroller frequently. The cloth cover cannot be dipped and washed. When the cloth cover is cleaned, please use a brush and other cleaning instruments to clean the dirt.
Parts
- Stroller Frame x1
- Front Wheel x1
- Rear Wheel x2
Directions for Use
Estimated assembly time: 10 MIN. Steps: 6.
1. Unfolding Frame
Release the folding hook [folding-hook-icon]. Hold the handlebar with both hands and lift it up until a click is heard, indicating the frame is fully open. Then, flip the cowl bar tube forward, fasten the front buckle, and insert the strip into the button. Finally, unfold the canopy and zip it up.
Diagram Description: Shows releasing a hook, lifting the handlebar, and unfolding the frame.
2. Folding Frame
In the braking state, release the zipper and fold back the canopy. Release the front wheel orientation function. Hold the handlebar in one hand, push the unlock button on the handlebar to the left, and then press the closing button and press down the frame. The frame can be folded, finally hang the hook.
Diagram Description: Shows the process of folding the stroller, including releasing the canopy, unlocking the handlebar, pressing a closing button, and folding the frame.
3. Assembly and Disassembly of the Front Wheel
As shown in the image, insert the front wheel assembly into the front fork connector until you hear a "click". To disassemble, press the quick release buttons on both sides of the front fork connector and pull it upwards.
Diagram Description: Illustrates inserting the front wheel into the fork and pressing buttons to release it.
4. Install & Disassemble Rear Wheels
As shown in the picture, put the rear wheel into the rear wheel seat hole and listen for the "click". Hold the remove button and pull it out; the rear wheel can be removed.
Diagram Description: Shows inserting the rear wheel into its seat and pressing a button to remove it.
5. Use of Rear Wheel Brake Lever
Press down the brake pedal; the brake works. Conversely, it can be released.
Diagram Description: Depicts pressing the brake pedal to engage or disengage the brake.
6. For Pet Safety Belts
Diagram Description: Shows the pet safety belts inside the stroller.
Contact Information
For any questions, please contact the relevant customer care center:
USA/Canada
- US Contact: 001-877-644-9366, customerservice@aosom.com
- Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. Made in China.
- CA Contact: 416-792-6088, customerservice@aosom.ca
- Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.
France
- Contact: 0033-1-84166106, aosom@mhfrance.fr
- Imported by/Manufacturer/REP: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. Made in China.
Germany
- Contact: +49 4087408465, service@aosom.de
- ADRESSE DES IMPORTEURE/Hersteller/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. IN CHINA HERGESTELLT.
Italy
- Contact: 0039-0249471447, clienti@aosom.it
- IMPORTATO DA/Produttore/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). Ρ.Ι.: 08567220960. FATTO IN CINA.
Spain
- Contact: 0034-931294512, atencioncliente@aosom.es
- IMPORTADOR/Fabricante/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. HECHO EN CHINA.
UK
- Contact: 0044-800-240-4004, enquiries@mhstar.co.uk
- IMPORTER ADDRESS: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. MADE IN CHINA.
Portugal
- Contact: 0034-931294512, info@aosom.pt
- IMPORTADOR/Fabricante/REP: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. FEITO NA CHINA.
Recycling information: DONNEZ OU RECYCLEZ. Adresses sur quefairedemesdechets.fr
