POVISON

DL002A

Packing List

The packing list includes the following items:

• Desk Lamp
• Base
• Metal Parts
• Adapter
• User Manual

The diagram shows the desk lamp components being assembled with the base and adapter.

Specification

DL002A

Installation

The lamp arm connects to the base. A screw and spanner are provided to fasten it.

Instructions: Insert the lamp arm into the lamp holder and tighten it with the hexagon screw from the bottom.

Product Care

1. Please read the user manual before use.
2. Do not install the lamp above high temperature objects or in damp places. Avoid installation above stoves, gas, or exhaust pipes to prevent damage.
3. If the lamp is abnormal, disconnect the power supply immediately.

DL002A

Button Guide

The lamp features a multi-functional touch button.

• 1. On/Off & Color Temperature: Single click the button to turn the light on or off. Double click the button to adjust the color temperature.
• 2. Reduce Brightness: Single click the "-" button to reduce brightness. Long press the button for stepless brightness decrease.
• 3. Improve Brightness: Single click the "+" button to improve brightness. Long press the button for stepless brightness increase.

Function Guide

Turn on/off

Short press the button to turn the light on or off.

Adjust Color Temperature (CCT)

Double click the button to adjust the color temperature.

Function Guide (Continued)

Adjust Brightness

Increase Brightness: Short press the "+" button to improve brightness. Long press for stepless brightness increase.

Decrease Brightness: Short press the "-" button to reduce brightness. Long press for stepless brightness decrease.

Wireless Charging

The base of the lamp supports wireless charging for compatible devices. A diagram shows a phone being placed on the base for charging.

Multi-angle Adjustments

The lamp arm and head can be adjusted to various angles, indicated as approximately 180° and 270° in the diagram, allowing for flexible positioning.

DL002A

NOTICES

• Ensure the screw between the base and lamp arm is fastened to prevent a loose connection.
• After connecting to the power supply, the touch button for on/off will be active.
• When the phone is charging, the touch button will flash regularly.
• If the phone does not match with the wireless charger, the touch button will flash quickly.

DL002A

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During operation, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

URL: www.povison.com