Instruction Manual for GE Profile models including: PSB9240SVSS, PSB9240SV 30 Inch Single Wall Oven, 30 Inch Single Wall Oven, Single Wall Oven, Wall Oven

GE Profile™ 30" Single Wall Oven with 240V Advantium Technology PSB9240SVSS Quick Specs

GE GE Profile


File Info : application/pdf, 2 Pages, 290.40KB

PDF preview unavailable. Download the PDF instead.

nmhkte13dxs1sb9bulpt
PSB9240SV
GE ProfileTM Series 30" Single Wall Oven with Advantium® Technology

ADVANTIUM WALL OVEN/GE PROFILETM SERIES COOKING TOWER DIMENSIONS AND CABINET INSTALLATION INFORMATION (IN INCHES)

CL

2x4s or

equivalent

solid floor

NOTE: · Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. · 2" minimum between cutouts when installed above warming drawer or single wall oven. · Advantium 240-volt models cannot be installed under 36" height. · Use of the accessory drawer will replace the bottom trim piece for applicable installations.
Please see installation instructions for full details.

INSTALLATION INFORMATION: Before installing, consult installation instructions packed with product for current dimensional data for current dimensional data.

30" Cabinet width

4-3/16"

25-1/4" Cutout width

Suitable bracing to support runners
4-3/16"

21-5/8" over centerline
of cabinet (Must support 130 lbs.)

20-1/4"

29-3/4"

A B

Junction box location (240-volt models only)

21-1/2"
To back of control

3" min. between cutouts recommended ­ 2" min. required

Conduit (46" long)

A B
Required cutout location 36-3/4" minimum
from floor

Construct Solid Bottom
Min. 3/8" plywood
supported by 2 x 4 or
2 x 2 runners, all four sides.
(Must support 150 lbs. for Advantium®) (Must support 200 lbs. for wall oven)

21-1/2" To back of control 20-1/4"
29-3/4"

A
Conduit (48-1/2"
long)

23-1/2" Cutout depth
B 17/1/2"
Cutout height

Junction box location (240-volt models only)

Required cutout location
36-3/4" minimum from floor

Construct Solid Bottom Min. 3/8" plywood supported by 2 x 4 or 1 x 2 runners, all four sides. (Must support 150 lbs.)

9-1/4" cutout height 28-1/2" cutout width

30" Cabinet width

2" min. between cutouts
1" min. above toekick or adjust to oven installation height

A / B = Allow the following clearances around the cutout on the front surface of the cabinet: 1-7/8" from the top, 2-3/8" from the side edges and 1-1/8" from the bottom. NOTE: these refer to minimum clearances required for installation and do not reflect actual product dimensions.

Listed by Underwriters Laboratories

For answers to your Monogram, CaféTM, GE ProfileTM or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Product Specification Revised 7/24

PSB9240SV
GE ProfileTM Series 30" Single Wall Oven with Advantium® Technology
FEATURES AND BENEFITS
SPEEDCOOK OVEN (240V) ­ Enjoy oven-quality results two to eight times faster than a conventional oven.
MULTIPLE COOKING FUNCTIONS ­ Expand your cooking versatility with an all-in-one oven.
MULTIPLE HEAT SOURCES ­ True European convection, microwave and light are used in different combinations to achieve your desired cooking results halogen heat.
OVER 175 PREPROGRAMMED MENU SELECTIONS ­ Preprogrammed selections make meals easy.
CUSTOM RECIPE SAVER ­ Conveniently store cooking instructions for up to 30 different recipes.
IN-OVEN CAMERA ­ Check on your food from anywhere without opening the oven door by livestreaming video of your food on your smartphone.
BUILT-IN WIFI, POWERED BY SMARTHQTM APP ­ Connect, control and manage your oven from anywhere with your smartphone or tablet. (Select features require WiFi Connection.)
BUILT-IN WIFI ­ Ensure your oven always has the latest features with downloadable software upgrades.
BRILLIANT 7" TOUCHSCREEN DISPLAY ­ A bright, interactive touch screen is easy to use and includes custom screen backgrounds, weather updates and a pop of intrigue with fun food facts.
ALLOWS FOR USE WITH JX2200/2201 STORAGE DRAWER
PSB9240SVSS ­ Stainless Steel

Listed by Underwriters Laboratories
Product Specification Revised 7/24



References

Adobe PDF Library 17.0 Adobe InDesign 19.5 (Macintosh)