Ocean Matrix - Affordable Interfaces for Broadcast and Pro-AV
User Manual for OCEAN MATRIX models including: OMX-07HMHM0001 4K HDR 4x4 HDMI Matrix Switcher, OMX-07HMHM0001, 4K HDR 4x4 HDMI Matrix Switcher, HDMI Matrix Switcher, Matrix Switcher, Switcher
File Info : application/pdf, 24 Pages, 9.92MB
DocumentDocument Operating Instruction
Description:
The Ocean Matrix OMX-07HMHM0001 allows up to four HDMI source device connections to independently distribute any source to up to four connected HDMI displays. This HDMI 2.0 unit supports up to 4K@60Hz with flexible switching options for ease of use, as well as digital and analog audio extraction. The OMX-07HMHM0001 also supports mixed 4K & 1080p display outputs and features built-in downscaling for simultaneously displaying 4K content to a 4K monitor and 1080p content to a 1080p monitor.
Features:
4 x HDMI 2.0 Inputs 4 x HDMI 2.0/1.4 Outputs 4 x SPDIF Coaxial Audio outputs 4 x Analog Audio outputs Supports 4K@60Hz YUV 4:4:4 Audio Sampling Rates up to 192kHz Supports HDR10, HLG, and Dolby Vision Supports IR, RS232 control, TCP/IP control, web GUI control, or Push Button control PCM2.0, Dolby True HD, DTS-HD Master Audio, and LPCM 7.1 Supported Supports Analog and SPDIF Audio Extraction 18Gbps Bandwidth HDCP 1.4 and 2.2 Compliant Built-in EDID Management and Learning
Specifications:
Operating Temperature: 32 F to 104 F Max Resolution: 4K@60hz YUV 4:4:4 Ethernet Port (IP Control): RJ45 Female IR Ext Port: 1 x 3.5mm Stereo Jack Bandwidth: 18 Gbps Dimensions (LxWxH): 8.5 x 5.1 x 1.3in Weight: 1.03lbs Power Consumption: 14W (Max)
Product Includes:
1 x 12V/2A DC Power Supply 1 x Remote Control 1 x IR Ext RX Cable 5 x Phoenix Plugs for RS232 Cable Termination & L/R Audio Termination 1 x Setup CD
Operation Controls and Functions:
Operating Instruction
1. LCD Screen / IR Receiver Window 2.Output 1-4: Press to choose an output, press again to cancel. Press and hold to
choose all outputs, press and hold again to cancel all. 3.Input 1-4: Press to choose one input, workable only if output is already choosen,
press and hold to choose one input for all outputs. 4.PRESET: PRESS TO ACCESS PRESETS. 5.UP Button 6.LOCK: Press and hold to lock, repeat to unlock. When locked, all other buttons are
not accessable. 7.MENU: Press to access main menu interface or return to the previous menu. 8.DOWN Button 9.ENTER: Press to confirm
Operating Instruction
1. Analog Audio Out 2.S/PDIF Audio Out 3.RS232 Control 4. IR-Ext 5.Ethernet Port 6.DC12V/2A Input 7.HDMI Output 8.HDMI Input
Connecting and Operating:
1. Connect source devices to input ports of the matrix 2.Connect HDMI output ports to a TV or other HDMI devices 3.Optional: Connect RS232 cable from PC RS232 port 4.Optional: Connect an ethernet cable from the TCP/IP port on the matrix to a local network 5.Connect 12V power supply to DC power socket 6.Power on the matrix, HDMI sources and displays
Remote Control Description:
Operating Instruction
1. Power On / Standby 2. M: Turn off the HDMI output audio 3. W: Lock remote control 4. Outputs 1-4 5. All: Selects all outputs 6. X: Turn off ouput channel 7. PTP: Mirror all inputs and ouputs
a.Ex. Input 1 to output 1, input 2 to ouput 2 etc..
8. Inputs 1-4 9. For switching inputs left and right 10.For switching inputs left and right, up and down
Note: Power on / Standy: press for standby mode, LCD screen will show "System Shutdown", HDMI output 5V will disconnect and TV without image. Press again to
wake device, HDMI output will return to normal.
Video Switch: output + input (ex. output 1 + input 2, switches output 1 to input 1) Turn off HDMI Ouput Audio: output + M (ex. output 1 + M, turn off output 1 audio) Lock Remote Control: press W to lock, press again to unlock Turn off Output Channel: output + x (ex. output 1 + X, output 1 turns screen black, output + X again, to return normal)
Switching Input Left and Right: output + < or >; (ex. All + <, TV image will change according to the switching input and skip automatically if there is no input signal.
Operating Instruction
Panel Control Description:
Video Switch Operation: Signal switching options includes 4 switching channels, which can be randomly configured as intput/output according to requirements to form a 1x4 to 4x4 matrix. It can switch any input signal to 1 channel output or all channel outputs. Operation format: "Output channel" + "input channel", or press and hold "input channel"
For example
To switch output 1 to input 4: Press output 1 + input 4 to complete switch Note: Press output + input to switch; then press input button again to switch input (no need to repeatedly press output) Video Control: There are 2 sub-menus in video interface: 1: Switching 2: On/Off
Video Switching: Operation:
1. Select "Video" in the main menu, press "ENTER" button 2.Press "up and down" button to choose "Switching" 3.Press "Enter" to enter the next sub-menu 4.Press the "up and down" button to select "Output 1 - 4" ("All" means all ouput, "Switching") 5.Press "Enter" to enter the next sub-menu 6.Press the "up and down" button to select input 7.Press "Enter" button to complete video switching
Operating Instruction
Output Switch Control: Video output is open by default but you can open/close any output port, or open/close all output ports:
1. In the main menu, select "Video" and press "Enter" button 2.Press "up and down" button to select "On/Off" 3.Press "Enter" button to enter the next sub-menu 4.Press "up and down" button to select "output 1-4" 5.Press "Enter" to enter the next sub-menu 6.Select Ouput-HDMI 1-4, press "Enter" button to enter the next sub-menu 7.Press the "up and down" button to select "Off" or "On" 8.Press "Enter" button to confirm that the output port is open/closed
Operating Instruction
Audio Control Interface: There are 2 sub-menus in audio control interface: Line out & De-Embed (both are default open)
Operating Instruction
Switch Output Audio: "Line out" means switch HDMI output audio, you are able to mute the TV from any one HDMI output channel Operation:
1. Select "Audio" in main menu and press "Enter" button 2.Press "up and down" button to select "Line out", press "Enter" button, you are
then able to select output 1-4 and all by pressing the "up and down" button. Press "Enter" button to choose "on" and "off" 3.Ex. to mute an HDMI connected to output1, press "Audio", "Enter", "Line Out", "Output1-HDMI1", "Off", "Enter"
Audio Extraction Control: "De-Embed" to set the output audio for both analog and SPDIF audio, can select or mute any one audio channel Operation:
1.Select "Audio" in the main menu and press "Enter" button 2.Press the "up and down" button to select "De-Embed", press "Enter" button, you
are then able to select output 1-4 or all via pressing "up and down". Press the "Enter" button to choose "on" and "off" 3.Ex. to turn off audio extraction on HDMI output1 press "Audio", "Enter", "DeEmbed", "Output1", "Off", you will then return to the upper menu after "Enter"
EDID Setting Interface: EDID management: User EDID, build-in EDID, Copy EDID mode
The default EDID is "Default1"
Default1
4K60444-LPCM:2.0,HDR:HLG
Default3
4K30444-LPCM:2.0,HDR:None
Default2 Default4
4K60 420-LPCM: 2.0, HDR:None 1080P60 444-LPCM: 2.0, HDR:None
Operating Instruction
Ex. Switch default1 to output1: Operation:
1.Select "EDID" in the main menu and press the "Enter" button 2.Press the "up and down" button to select "Input1" 3.Press the "Enter" button to enter the next sub-menu 4.Press the "up and down" button to select "Default1", press "Enter" to complete setting 5.Behind the selected EDID, it will show the max support resolution, audio format and audio channel
Operating Instruction
Preset Application:
The Preset interface can save the current video, audio, EDID, system settings, etc..., supports 8 different presets, can preset through the web, command, panel button, and recall Preset control interface has three sub-menus: Call Scene Save Scene Clear Scene Operation:
1.Select "Preset" in the main menu and press "Enter" to enter the preset interface; you are able to call, save and clear preset
2.Save preset: select "Save" and any presets 1-8, then "Enter" 3.Call preset: Call, and any presets 1-8, then "Enter" 4.Clear preset: Clear, and any presets 1-8, then "Enter" (the saved preset will return to the default)
Operating Instruction
Setup Interface
Setup interface can set serial port baud rate, DHCP switch, device reboot and factory reset.
Baud Rate Setting:
Baud Rate Setting 4 options for baud rate setting: 9600, 19200, 57600, 115200. The default serial port is 115200 The below example is setting baud rate to 9600
Operation
1.Select "Setup" in the main menu and press the "Enter" button 2. Press the "up and down" button to select the "Baud" 3.Press the "Enter" button to enter the next sub-menu 4.Press the "up and down" button to select "9600" 5.press "Enter" to complete setting
Operating Instruction
DHCP Switch: DHCP On: dynamic IP address; DHCP Off: static IP address (default is DHCP off) DHCP on operation:
1.Select "Setup" in main menu and press the "Enter" button 2.Press the "up and down" button to select "DHCP" setting 3.Press "Enter" to enter the next sub-menu 4.Press the "up and down" button to select "On" 5.Press "Enter" to open DHCP to allocate an IP address automatically
Reboot: Reboot device,default is"NO".
Operation
1.Select "Setup" in the main menu and press the "Enter" button 2.Press the "up and down" button to select "Reboot" 3.Press "Enter" to enter the next sub-menu 4.Press the "up and down" button to select "Yes" 5.Press "Enter" to complete rebooting the device
Operating Instruction
Factory Reset: There are two factory settings:
1.Factory Common: factory reset for video switch, EDID, audio and settings (IP address can't be factory reset when under "common")
2.Factory All: factory set for video switch, EDID, audio, settings, presets and device name a.Ex factory all operation: i.Select "Setup" in the main menu and press the "Enter" button ii.Press the the "up and down" button to select "Factory" iii.Press "Enter" to enter the next sub-menu iv.Press the "up and down" button to select "ALL" and press the "Enter" button v.Press the "up and down" button to select "Yes" and press thr "Enter" button
Operating Instruction
Query Information Interface:
System interface query company name, device name and version information IP interface query device IP address, MAC address and DHCP status Operation
1.Select "INFO" in main menu and press "Enter" button 2.Press the "up and down" button to select "System" or "IP", bottom color will turn white when
selected 3.Press "Enter" to enter the next sub-menu, then you are able to query device information
Operating Instruction
Operating Instruction
9. RS232 Control
9.1 Open CommUart Assistant. 9.2 Comport setting:
Choose correct COM port that connect to PC in parameter configuration area
Baud Rate: Parity: Data Bit: Stop Bit:
115200 bps(Default) None 8bit 1bit
9.3 Enter Port Command in Send options.
9.4.Command List
1).All commands start with "#" 2)."_" the underline cannot omit. 3) Command head,Parameter and target need to add one "SPACE".
The following table is only an example.Please refer to the list of instructions.
Type Command head Explain
Example1
Format #cmd
without
Value
Regulation
Can be used to search command,after receiving command, the system will feedback all open command format fields #cmd Search all open command
Web Control:
Operating Instruction
Change IP Address of PC:
Before configuring the device through the website, it is necessary to configure the IP address of the computer configured with the device (mainly to ensure that the computer and the device are set in the same network segment).
1). Open the network control center and set the computer's IP address
2). Choose to use Static IP, with the IP address set to 196.168.1.x (x ranges from 0 to 254, but cannot be consistent with the device's IP address), 3). Subnet mask set to 255.255.255.0 4). Gateway set to 192.168.1.1
Operating Instruction
Log in by Browser: Default IP address for log-in: 192.168.1.168 Type in user name and password (default user name: admin; default password: 123456) Note: it is suggested to use newer versions of Google, firefox, etc.. for better compatibility.
Video interface:
1. Output 01 >> 02 01 means input 02 means output all means all output
Operation steps:
Click 01 >> 01 or All then click input 01~04 Ex Switching input 1 to output 4 Click "04 >> 04" first, then click "01" 2. Input 01~04 means HDMI input 1~4 3. OFF Close output channel, click "OFF" to close output channel; Click "ON" to close
this function. The default is "OFF"
4. Store preset1~preset8. Recall: call the preset; Save: save the preset
Operation steps:
1 Call preset preset1 + Recall call preset1 2 Save preset preset2 + Recall save preset2
Modify Port Name: 1.Click to choose the input or ouput port, rename in input box, then click save & exit 2.Click to choose preset, rename in input box, then click save & exit
Note: Rename limit: 1-15 characters
Operating Instruction
Audio Interface:
1. Click output1-4 HDMI Turn off HDMI output audio
Operation: Ex: Turn off audio on the unit connected to HDMI output1 (TV) Click output1 HDMI, color will change on the TV, will only display video (no audio) Re-click to turn on audio
2. Click output1-4 De-Embed turn off audio extraction function, also turn off SPDIF and a nalog
audio at the same time.
Operation
Ex: Turn off HDMI output1 audio extraction Click output1 De-Embed, color will change and audio for analog and SPDIF out will turn off Re-click to turn on audio
Operating Instruction
EDID Interface:
1.Input: 00>> Input1, 00~16: EDID number, Input1~4: HDMI input1~4 2.Ouput: 00~03: Default EDID, 04~07: User EDID, 08~11: Copy EDID, 12~15: Input EDID, 16:
Temp EDID, refer to below for more details:
1.EDID information: show EDID here: click "00>> Input1" or 00: "Default1", will show resolution, audio, audio channel, HDR and serial number
2.Edit user EDID: Click "Edit User EDID", choose default, user, copy, input EDID on "EDID Edit Page" to save User 1-4, support power-off memory
Operation: 1.HDMI input1 use second default EDID; click "00>>Input1", then click "01: Default2" 2.Save copy HDMI out1 to User1: choose "default1" in "EDID Edit Page", then choose "User1" and click "Set" to finish
Operating Instruction
Network Interface: MAC address can not be modified, for display only. Static IP: Click DHCP switch (DHCP Off), you can modify IP address, then click "Apply" button, it will then countdown. If device IP address is the same as client IP, it will re-login into the web interface. If unable to refresh automatically, then resubmit form manually Dynamic IP: Click DHCP switch (DHCP On), IP address is assigned by router and will turn to grey, can not be modified, but can display current IP address information. IP address / Net Mask address / Gate Way address can only be modified when DHCP is Off Default IP Address: 192.168.1.168
Operating Instruction
System Setting Interface:
1. System Setting
Reboot: Click to reboot device Factory Common: Click to reset device for partial function Factory All: Click to reset device totally "Reboot" will not clear user parameter; "Factory Common" will not clear Network and Preset parameter; "Factory all" will reset to default totally
2.Change Password Change user name and password, then click"Apply".
Note:The user name and password, only supports 6~15 characters
PRODUCT SERVICE
Damage requiring service:
The unit should be serviced by qualified service personnel if: (a) The DC power supply cord or AC adaptor has been damaged (b) Objects or liquids have gotten into the unit (c) The unit has been exposed to rain (d) The unit does not operate normally or exhibits a marked change in performance; The unit has been dropped or the cabinet is damaged. (2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel. (3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer. Unauthorized substitutes may result in fire, electric shock, or other hazards. (4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install the unit:
Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product. Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit. Do not attach the power supply cabling to building surfaces. Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged. Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it. To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit
WARRANTY
1 Year
812 Kings Highway | Saugerties, NY 12477 | 845-246-7500 | www.oceanmatrix.com
100% Employee Owned Division of Tower Products Incorporated