Download Area | Bosch Security and Safety Systems
ConfluenceDownload Area | Bosch Security and Safety Systems
User Guide for BOSCH models including: DIP-73xx, DIP-74xx, DIP-72xx, DIP-73xx DIVAR IP System Manager, DIP-73xx, DIVAR IP System Manager, IP System Manager, Manager
Download Area | Bosch Security and Safety Systems
File Info : application/pdf, 6 Pages, 297.18KB
DocumentDocumentRelease notes BVMS 12.3.0 SystemManager package 1.1 Date: 03-Mar-2025 Release notes BVMS_12.3.0_SystemManager_package_1.1 2 | 6 Table of Contents 1 Document History 3 2 BVMS 12.3.0 System Manager package 1.1 4 2.1 Installation prerequisites and operation notes 4 2.2 New features 5 2.3 Fixed issues 5 2.4 Known limitations and issues 5 2.5 Subcomponent software versions 6 Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Release notes BVMS_12.3.0_SystemManager_package_1.1 3 | 6 1 Document History Date Version 03.03.2025 1.0 Changes Initial release Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Release notes BVMS_12.3.0_SystemManager_package_1.1 4 | 6 2 BVMS 12.3.0 System Manager package 1.1 The BVMS_12.3.0_SystemManager_package_1.1.zip is a software package for the DIVAR IP System Manager application. When used together with the DIVAR IP System Manager application version 2.3.2 and higher, it allows to choose the DIVAR IP all-in-one 4000, DIVAR IP all-in-one 6000, and DIVAR IP all-in-one 7000 (DIP-73xx, DIP-74xx) operation mode and install corresponding software applications, as well as to upgrade BVMS and VRM versions on the above mentioned DIVAR IP all-in-one series. The same package is also used to upgrade DIVAR IP all-in-one 5000 and DIVAR IP all-in-one 7000 (DIP-72xx) systems, already operating under DIVAR IP System Manager application version 2.3.2 and higher, to BVMS 12.3.0. Operation modes: · Full video recording and management system, including BVMS, VRM and iSCSI storage. · Pure video recording system, including VRM and iSCSI storage. · iSCSI storage expansion for a BVMS or VRM system. The BVMS_12.3.0_SystemManager_package_1.1.zip includes BVMS setup that does not contain AI packages for Privacy overlay feature. BVMS Setup with AI is not supported on DIVAR IP. Privacy overlay feature can only be used on workstations connected to DIVAR IP. For this, BVMS Setup with AI should be used to install BVMS Operator Client application on the workstation. Please refer to the BVMS 12.3.0 Release notes for more details. 2.1 Installation prerequisites and operation notes · The system must be connected to an active network during initial boot and package installation. · DIVAR IP all-in-one 4000/6000/7000(DIP-74xx): DIVAR IP System Manager application version 2.3.2 or higher shall be installed and started. Please refer to the DIVAR IP all-in-one 4000 / 6000 / 7000 (DIP-74xx) systems Installation Manuals and User Manuals for detailed instructions. · DIVAR IP all-in-one 7000(DIP-73xx): DIVAR IP System Manager application version 2.3.2 or higher shall be installed and started. For further details please refer to the DIVAR IP System Manager 2.3.2 Release notes and to the Application note "DIVAR IP allinone Remote Portal connectivity" in the product catalogue. · In order to upgrade a DIVAR IP all-in-one 7000(DIP-73xx), managed by DIVAR IP Software Center and running previous versions of BVMS / VRM software, first upgrade it to BVMS 11.1.1 / VRM 4.03.025 versions with DIVAR IP Software Center package. Then install DIVAR IP System Manager application version 2.3.2 or higher, as described in its corresponding Release notes. After that, perform the software upgrade using the BVMS 12.3.0 System Manager package 1.1. · In order to upgrade a DIVAR IP all-in-one 5000 and DIVAR IP all-in-one 7000(DIP-72xx), running previous versions of BVMS / VRM software, first upgrade it to BVMS 11.1.1 / VRM 4.03.025 versions with regular BVMS installer. Then install DIVAR IP System Manager application version 2.3.2 or higher, as described in its corresponding Release notes. After that, perform the software upgrade using the BVMS 12.3.0 System Manager package 1.1. · In upgrade scenarios for BVMS operation mode, a manual system reboot is not technically required, but recommended after BVMS upgrade with the BVMS 12.3.0 System Manager package 1.1. This results in a short recording gap. · To download the BVMS 12.3.0 System Manager package 1.1, go to https:// downloadstore.boschsecurity.com/. Then, under the Software tab, select BVMS Appliances from the list and click Select. · Locate the BVMS_12.3.0_SystemManager_package_1.1.zip file from the list of all available software packages, and save it to a storage medium such as a USB stick. · Unzip the files on the storage medium. Do not change the folder structure of the unzipped files. · Connect the storage medium to your DIVAR IP all-in-one system and follow Initial system setup and Choosing operation mode or Upgrading software instructions in the DIVAR IP all- Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Release notes BVMS_12.3.0_SystemManager_package_1.1 5 | 6 in-one 4000 / 6000 / 7000 (DIP-74xx) systems Installation Manuals and User Manuals, and in the Application Note "DIVAR IP allinone Remote Portal connectivity". · When a major software application of the Operation mode is upgraded (for example, BVMS application in the Full video recording and management system, including BVMS, VRM and iSCSI storage Operation mode), corresponding dependent software applications are also upgraded (for example, VRM, VSG, etc.) 2.2 New features · Since BVMS 12.1.0 System Manager package 1.0, BVMS Desktop screen (BVMS Kiosk screen) has several customization possibilities for introducing a company logo picture and a custom text, as well as selecting if an application icon will appear on the screen or not. Guidance on how to make this customization is published in the Knowledge Base article. · Installation of the BVMS 12.3.0 System Manager package 1.1 will enable Windows User Account Control (UAC) feature on those products where it was previously disabled. This improves data security of the DIVAR IP all-in-one portfolio, while the user will need to provide additional confirmation for some of the actions on Windows level. 2.3 Fixed issues · When updating BVMS to version 12.3.0 with the previous version of the package, in some cases after certain Windows update, previously installed Patch/Update packages for prior BVMS version were not removed correctly, which caused the upgrade operation to fail. This behavior is fixed in the BVMS 12.3.0 System Manager package version 1.1. · After installing BVMS 12.3.0 with the previous version of the package, it was not possible to install a Patch/Update package afterwards. This behavior is fixed in the BVMS 12.3.0 System Manager package version 1.1. 2.4 Known limitations and issues · The DIVAR IP all-in-one system must be connected to an active network during initial boot and package installation and upgrade. · Please make sure you update DIVAR IP System Manager application to current version (2.3.2 or higher) prior to performing any further upgrades. DIVAR IP System Manager application version 1.5.0 may become non-responsive while updating the user interface data, if many packages are installed. This issue is fixed starting with the version 2.0.0. · Upgrade from previous version of BVMS with the BVMS 12.3.0 System Manager package technically does not require system reboot. Due to this, BVMS Desktop application is not reloaded and BVMS version number indicated on the BVMS Desktop is not updated. To update the indication, and load updated BVMS Desktop application, Limited user sign-out or system reboot is required. · After upgrading from previous version of BVMS or VRM, the Windows list of installed programs might contain both previous and current versions (or duplicated) entries for Transcoding service. In fact, only one current version of Transcoding service is installed. Uninstalling of what appears to be the older or duplicated version will uninstall Transcoding service from the DIVAR IP, which should not be done. · When starting DIVAR IP System Manager from the BVMS Desktop screen soon after system reboot, UAC might take longer than expected time to initialize, thus failing to start the DIVAR IP System Manager. · Enabling User Account Control (UAC) feature in MS Windows Server IoT 2022 for Storage (used in DIVAR IP all-in-one 4000, DIVAR IP all-in-one 6000, DIVAR IP all-in-one 7000 (DIP-74xx)) disables the Time Zone selection in the Date&Time Settings Windows dialogue. To change the Time Zone, please open the Server Manager application, go to main Dashboard > Local Server on the left panel, then select the time zone on the right side. If the DIVAR IP is installed in BVMS operation mode, Time Zone can be also changed from the BVMS Wizard application. · Performing the System Recovery on a system in BVMS Operation Mode with configured and attempting to record cameras, and without stopping the recording, may cause LUN Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights. Release notes BVMS_12.3.0_SystemManager_package_1.1 6 | 6 Formatter application to fail when installing BVMS Operation Mode after recovery. This is due to the fact that once the system is running again and gets the same IP address, the cameras will access existing LUNs and block intended checks and operations of LUN Formatter application. To avoid this, it is recommended to isolate the device from production environment network during System Recovery and Operation Mode installation, or assign a temporary different IP address for this setup period. DIVAR IP all-in-one system must still be connected to an active network during initial boot and Operation Mode installation. · Due to Microsoft Windows continuous security improvements with Windows Updates, adding a VRM or iSCSI running on an up-to-date DIVAR IP all-in-one system to a BVMS, that is running on a not fully updated system, may cause a limitation on the access to the resources or reduce the ability to remotely manage VRM/iSCSI configuration from within the leading BVMS (for example, basic level LUN management). It is highly recommended to keep all systems up-to-date to have a higher protection against security threats and higher compatibility between systems in the same environment. 2.5 Subcomponent software versions · BVMS 12.3.0.171 · Video Recording Manager 4.50.0042 · Video Streaming Gateway 9.3.0.208 · Transcoding Service 7.10.0062 Copyright Robert Bosch GmbH. All rights reserved, also regarding any disposal, exploration, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.