COBIZI 20x40 FT Party Tent Assembly Instructions

MAKING THE BEST OUTDOOR FURNITURE FOR YOU.

This product comes packaged in 5 boxes that might not arrive together. Safety measures and professional installation are highly recommended. Before returning to the store, please contact COBIZI Customer Service at service.canopy@outlook.com.

COBIZI appreciates the trust and confidence you have placed in their product. COBIZI strives to continually create quality products designed to enhance your home. Visit COBIZI online to see their full line of products available for home improvement needs. Thank you for choosing COBIZI.

Made in China

Important Safety and Assembly Notes

Assembly requires a minimum of three individuals.
It is advisable to have a ladder for the assembly process.
Before commencing assembly, make sure to gather all the necessary parts and arrange them systematically.
Under no circumstances should candles, matches, or any open flames be used inside or in close proximity to the tent.
If any part of the pipe is deformed during transportation, pliers can be used to restore the shape of the pipe.

Parts List

Item No.	Description	Quantity
1	Straight pipe with two holes	x30
2	Straight pipe with one hole	x14
3	Short straight pipe with two holes	x14
4	Short straight pipe with one hole	x10
5	Long straight pipe with three holes	x4
6	Short straight pipe with one hole and a connector	x2
7	Curved pipe with one hole	x4
A	Three-way corner connector (roof peak)	x6
B	Four-way cross connector	x15
F	Two-way T-connector (base)	x10
G	Foot plate connector	x4
	Long straight pipe (no holes shown)	x152
φ5	Tent peg	x18
	Rope	x4
	Main tent frame (roof structure)	x1
	Main tent cover	x2
A	Side wall panel A (with windows)	x2
B	Side wall panel B (with windows)	x2
C	Side wall panel C (with windows)	x2
	Bungee cord fasteners (18pcs), A-type connectors (6pcs), B-type connectors (15pcs)
	Pipes (Item 2: 14pcs), Pipes (Item 3: 14pcs)
	Pipes (Item 1: 12pcs), Pipes (Item 6: 2pcs), Pipes (Item 7: 4pcs), Pipes (Item F: 10pcs), Pipes (Item G: 4pcs)
φ5	Tent pegs (18pcs), Ropes (4pcs)

Assembly Instructions

Step 1: Assemble the Roof Frame Sections

Connect Item 1 pipes using A-type (6pcs) and B-type (15pcs) connectors. There are 3 sections to be assembled. Each section consists of Item 1 pipes connected by B-type connectors in the middle and A-type connectors at the ends. Ensure the pipes are fully inserted into the connectors.

Step 2: Assemble the Side Frame Sections

Connect Item 2 pipes with Item 3 pipes. There are 14 sets of Item 2 and Item 3 pipes to be connected. Ensure the pipes are fully inserted.

Step 3: Connect Roof and Side Frame Sections

Assemble the main roof structure by connecting the sections from Step 1. Then, attach the side frame sections (from Step 2) to the roof structure. The diagram shows the overall structure with numbered connection points (1, 2, 3, 4, 5, 6, 7).

Step 4: Attach Bungee Cord Fasteners and Temporarily Secure Poles

Every part marked in blue in the diagram must be installed with 6 bungee cord fasteners. Parts marked in red must be installed with 4 bungee cord fasteners. The poles marked in red can be temporarily secured first. These fasteners are also used to secure the cover cloth during Step 9. The diagram shows the tent frame with various connection points where bungee cords are attached, securing the frame components.

Step 5: Install Roof Support Pipes (Part 1)

Attach Item 4 or Item 5 pipes to the designated connection points on the roof structure. The diagram shows individuals lifting and inserting these pipes into the frame. There are 5 connection points for Item 4 pipes and 2 connection points for Item 5 pipes. Ensure proper insertion into the existing frame.

Step 6: Install Roof Support Pipes (Part 2)

Continue attaching Item 4 or Item 5 pipes to the remaining designated connection points on the roof structure. Similar to Step 5, this involves lifting and inserting pipes. There are 5 connection points for Item 4 pipes and 2 connection points for Item 5 pipes. Ensure proper insertion into the existing frame.

Step 7: Assemble the Base Frame

Assemble the base frame using Item 1 (12pcs), Item 6 (2pcs), Item 7 (4pcs), Item F (10pcs), and Item G (4pcs) parts. The diagram shows a rectangular base structure being formed, with Item G (foot plates) at the corners and Item F (T-connectors) along the sides. Item 1 pipes connect these components, and Item 6 and 7 pipes form the end sections of the base.

Step 8: Attach Base Frame to Main Structure

Attach the assembled base frame (from Step 7) to the main tent structure. The diagram shows the foot plates (Item G) of the base frame connecting to the vertical poles of the main structure. Ensure all connections are secure.

Step 9: Hang Side Walls and Main Cover

The fasteners marked in red are the same ones used in Step 4. 4 bungee cord fasteners are needed for part 4 (marked in blue). 12 bungee cord fasteners are needed for part 1 (marked in yellow). 8 bungee cord fasteners are needed for part 6 & 7 (marked in green). Hang Side Wall A, B, C from left to right. The diagram shows the tent frame with the main cover draped over it and side walls being attached using bungee cords and velcro straps.

Step 10: Secure the Tent with Tent Pegs

Use the φ5 tent pegs (18pcs) and ropes (4pcs) to secure the tent to the ground. The diagram shows the tent pegs being driven into the ground through the foot plates and ropes being tied from the tent frame to the pegs for added stability.

Step 11: Enhance Wind Resistance

To improve wind resistance, complete this installation step. If expansion screws or ground nails are not installed, strong winds may topple the gazebo. Expansion screws are essential for stability on cement surfaces, and ground nails are for grassy surfaces. Ground nails are included in the package, while expansion screws are not provided. The diagram illustrates correct installation methods for both grassy surfaces (using ground nails) and cement surfaces (using expansion screws), and incorrect methods where the tent is not properly secured.

Step 12: Complete Installation

The tent assembly is now complete. The diagram shows the fully assembled 20x40 FT Party Tent.

Contact COBIZI

If you have any questions about the installation of COBIZI products, please email service.canopy@outlook.com.

Alternative method to contact COBIZI (for amazon.com orders only):

Log into your Amazon account.
Go to "Your Orders" and find the purchase.
Click on "Contact Seller".

	COBIZI Screen Tent Instruction Manual Instruction manual for the COBIZI Screen Tent, including assembly, disassembly, parts list, safety instructions, and warranty information.
	COBIZI 3x3M Gazebo Assembly Guide \| Installation & Care Instructions Detailed instructions for assembling your COBIZI 3x3 meter outdoor gazebo. Includes safety cautions, parts list, step-by-step assembly, and maintenance tips for your patio or garden.
	COBIZI Pop-Up Canopy Gazebo Setup & Parts Guide \| Easy Assembly Learn how to easily set up your COBIZI Pop-Up Canopy Gazebo with our step-by-step instructions. Includes a complete parts list and important safety notes for assembly and use.
	Cobizi Pop-Up Canopy Setup Instructions Comprehensive guide for setting up your Cobizi Pop-Up Canopy, including parts list and step-by-step assembly instructions for quick and easy deployment.
	COBIZI 10 Ft x 10 Ft Pop Up Canopy Assembly and Instruction Manual This manual provides assembly instructions, precautions, and usage guidelines for the COBIZI 10 Ft x 10 Ft Pop Up Canopy. It covers opening, attaching the top and walls, adjusting height, securing the canopy, and taking it down. Safety warnings and maintenance tips are also included.