Fantech Commercial Ventilation Solutions

Rapid Dry Jet Hand Dryers

The Rapid Dry Jet hand dryers are ultra-powerful units equipped with digital circuit controls and advanced infrared auto-sensing technology. They offer hygienic, hands-free operation, concentrated airflow for rapid drying, and an easy-to-clean, stylish casing. Available in white (RAPJET-W) and silver (RAPJET-S) finishes.

• Advanced infrared auto-sensing technology
• Hygienic hands-free operation
• Concentrated air flow for rapid drying times
• Includes excess water tray
• Easy to clean stylish casing with ergonomic design
• Water resistant design
• Unique high speed motor for low power consumption
• Warm or cold air function
• Auto-reset internal thermal protection
• 2-Year Limited Lifetime Warranty*

Specifications

Dimensions

Rapid Dry Hand Dryers

The Rapid Dry hand dryer is part of Fantech Trade's smart hand dryer range. These dryers feature digital circuit controls and advanced infrared auto-sensing technology, requiring minimal maintenance and offering reliable long-term performance. Available in stainless steel (RAPDRY-SS).

• Advanced infrared auto-sensing technology
• Hygienic hands-free operation
• Concentrated air flow for rapid drying times
• Casing made from easy to clean 304 stainless steel
• Water resistant design
• Efficient motor for high performance and low power consumption
• Warm or cold air function
• Auto-reset internal thermal protection
• 2-Year Limited Lifetime Warranty*

Specifications

Dimensions

Hand Dryers (General)

Available in white or brushed chrome, Fantech's automatic hand dryers offer a cost-effective and hygienic no-touch hand drying solution. They are suitable for public amenities, food preparation areas, hospitals, and schools.

• Available in white epoxy paint or brushed chrome finish
• Automatic infrared on/off activation
• 360° nozzle rotation for hand or face drying
• Drying cycle of approximately 15 seconds
• Self-resetting thermal overload protection
• Automatic cut-off after 60 seconds of continuous use

Specifications

Dimensions

Vandal resistant, robust heavy duty steel casing.

Air Curtains

Fantech Air Curtains are designed to maximize building efficiency by creating an invisible barrier of air that helps retain heating and cooling. They also prevent dust, fumes, odors, and flying insects from entering a building, potentially reducing running costs.

• Adjustable air deflection vents
• High/Low 2-speed operation
• Motors with built-in thermal overload protection
• Wall mounted switch included
• Can be integrated into a Building Management System

Air Velocity & Door Height

Effective door height:

• High speed: up to 4.0 m
• Low speed: up to 3.0 m

High Speed is suitable for medium to large doorways (e.g., supermarkets, shopping centers).

Low Speed is suitable for standard doorways (e.g., shops, cafes, small food preparation areas).

Dimensions

Specifications

Air Curtains are recommended for dry, clean air environments only. For industrial applications or technical data, contact your local Fantech Trade branch.

Compact 2000 Square Plate Axial Series (IP55)

The Compact 2000 Series is a high-quality, robust axial fan range suitable for commercial and industrial applications. It can be speed controlled to manage energy consumption.

• Single phase models only can be speed controlled
• Robust galvanised steel construction
• Inlet guard incorporated as standard
• Capable of operating across a wide temperature range
• Flying lead with junction box and 20 mm Ø flexible conduit fitted for easy installation
• Finished in durable polyester epoxy paint
• Can be mounted in any position

Accessories

• Electronic Speed Controller (VA5.0 - for single phase only)
• Rear Finger Guards (DG..)
• Backdraft Shutter (WSK..)

Dimensions

Specifications

* Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order. (Electrical data in bold type refers to fans that are fitted with 2-speed star/delta motors as standard). * High speed data shown. ^ Maximum ambient is 40°C when being speed controlled. HP - High Performance model. * Air flow without duct and fittings.

Contact your local Fantech Trade branch for more information.

Ring Plate Wall & Ceiling Mounted Fans (IP44)

The Ring Plate Axial Fans are suitable for wall or ceiling mounting and feature a high-quality galvanised steel casing, grille, and impeller. Their robust construction makes them suitable for a broad range of commercial and industrial applications.

• Powerful air flow and pressure performance
• High-quality Continuous Run motor
• Can be connected to ducting
• Speed-controllable
• Auto-reset thermal cut out protection fitted
• Sealed for life ball bearings

Accessories

• Run-on Timers & Speed Controllers
• Flexible Duct - Fire Rated AS/NZS 4254
• Wall Tubes
• External Grilles

Dimensions

Specifications

* Air flow without duct and fittings. * Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order.

Vogue Wall & Ceiling Mounted Fans (IP44)

The Vogue series of modern ceiling/wall mounted fans feature quick fitting swing locks for easy installation in suspended ceilings or plasterboard walls and ceilings. The grille is made from durable ABS plastic, and impellers are of galvanised steel.

• Contemporary flush to ceiling design
• Grille can be easily removed for cleaning
• Speed-controllable
• Fitted with a standard 240V plug and lead
• Auto-reset thermal cut out protection fitted
• Sealed for life ball bearings
• High-quality single-phase 'Continuous Run' motor
• Model with reverse air flow available

Accessories

• Run-on Timers & Speed Controllers
• Flexible Duct - Fire Rated AS/NZS 4254
• Wall Tubes
• External Grilles

Dimensions

Specifications

* Air flow without duct and fittings. * Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order.

Optional Duct Adapter

The optional Vogue duct adapter allows standard sized duct to be easily fitted to the fan. It simply slides onto the fan's spigot and is secured with duct tape. Made from durable ABS plastic.

Minitube In-Line Duct Mounted Fans

The Minitube Series of duct mounted axial fans is suitable for domestic, commercial, and industrial ventilation applications. Available in sizes ranging from 200 to 350 mm diameter.

• Choice of two lightweight but robust housing materials: metal or injection moulded plastic
• Good range of speeds available
• Can be speed controlled
• Can be mounted in any position
• Manual reset protection fitted as standard
• 3-pin plug and lead fitted in the plastic model

Specifications

* Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order.

Short Case In-Line Duct Mounted Fans (IP55)

The Short Case Axial Series features a lightweight, robust construction designed for exhaust and supply air ducted systems in commercial and industrial applications.

• Compact, short cased design
• Lightweight but robust construction
• Electrical junction box fitted as standard
• Capable of operating in ambient temperatures ranging from -20°C to +70°C
• Can be mounted in any position
• Available in single and three phase

Accessories

• Mounting Feet (CFT..)
• Inlet Cones (CIC..S)
• Matching Flanges (CMF..)
• Finger Guards (DG..)
• Electronic Speed Controller (VA2.8 for single phase only)

Dimensions

Specifications

Electrical data in bold type denotes 2-speed star/delta motors are fitted. Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order. When being speed controlled the ambient must not exceed 50°C. Contact your local Fantech Trade branch for more information.

Systemaire Kitchen Exhaust Fans

Systemaire commercial kitchen exhaust fans provide powerful performance, energy efficiency, and quiet operation. They are designed and tested by Fantech's engineering team, offering superior performance compared to equivalent fans on the market.

• Can produce up to 88% more pressure and be up to 9 dB(A) quieter than equivalent kitchen exhaust fans
• Greater number of drainage holes to prevent water build-up
• Lightweight design for easier handling and installation
• Supplied with matching flange for quick installation to suit standard round Spiro duct
• Can be used with smaller duct sizes due to high pressure capability
• Designed to handle clean air, grease-laden air, toxic and noxious gases
• Advanced mixed flow impeller design for high airflow and low noise
• Designed for small to medium-sized commercial kitchens

Dimensions

Components

1. Aerodynamic shaped cowl for smoother air flow, reduced turbulence and increased fan performance.
2. Weather and contaminant-proof enclosure for maximum motor protection.
3. Smaller exhaust opening than traditional kitchen exhaust fans reduces exposure to rain.
4. Removable wind band for easy cleaning and maintenance.
5. High performance mixed flow impeller provides quieter operation with better air flow and higher pressure development.
6. Greater number of drainage holes included around base to prevent water build up.

Specifications

Controls for Systemaire Kitchen Exhaust Fans

Fantech offers variable speed drives and wall plate speed controllers for Systemaire Kitchen Exhaust Fans.

Variable Speed Drives Danfoss VLT - HVAC FC 131

The VLT - HVAC FC 131 is a dedicated drive that is easy to install and commission. It features a user-friendly interface, integrated fan/pump control, built-in PI controller, fire mode, RFI filters, DC choke, thermistor input, and IP54 class protection.

Danfoss VLT - Micro FC 51

The VLT - Micro FC 51 drive is designed for simplicity and efficiency. Its compact size and forced-cooled heat sink allow for installation in confined spaces. Features include a start-up wizard, EMC filters, and optional 1ph input to 3 phase output.

Wall Plate Speed Controllers

• 2-speed rotary switch (TSS1-15)
• 0-10V speed controller (DCV-POT10K-WM)
• Variable speed controller (VA2.0, VA5.0, VA8.0 for 240V, 1 PH, 4 pole units)

Minivent Roof Mounted Fans

The Minivent Series of axial roof units is designed for a wide range of domestic and commercial applications. They can be speed controlled and are available in 6 sizes from 112 to 350 mm diameter.

• Robust, lightweight construction
• Wide choice of speeds available
• All motors are speed controllable
• Can be used in ducted systems
• Can be mounted at angles up to 30°
• Backdraft shutters can be fitted to fans 250 to 350 mm diameter
• Single phase, 240 V only

Accessories

• Run-on Timers & Speed Controllers
• Flexible Duct - Fire Rated AS/NZS 4254
• A range of upstands are available. Contact your local Fantech Trade branch for information.

Dimensions

Specifications

*Amperages shown are a guide only. Refer to our Sales Department for accurate figures at time of order.

Gamma Vertical Discharge Centrifugal Roof Units

The Gamma Series of centrifugal roof units is designed for commercial ducted exhaust applications. Models CE284V and larger are fitted with bird mesh to prevent the entry of birds and vermin.

• Robust, lightweight construction
• Cowls are U.V. stabilised
• Compact, low profile design
• Can be used in ducted systems
• Can be mounted at angles up to 30°
• Single phase, 240 V only

Accessories

• Run-on Timers & Speed Controllers
• A range of upstands are available. Contact your local Fantech Trade branch for information.

Dimensions

Specifications

ª Amperages shown are a guide only, refer to our Sales Department for accurate figures at time of order.

Alpha Relief Air Vents

The Alpha Relief Air Vents are designed to control air pressure within buildings and can also be used in ducted systems with remote fans. They are fitted with bird mesh to eliminate the risk of debris and birds entering the building.

• Lightweight, corrosion-proof construction
• Can also be used as air intake units
• Protective bird mesh guards fitted as standard
• Base and cowl made of U.V. stabilised plastic
• Designed for curb mounting
• Can be mounted at angles up to 30°

Typical Application

Exhausting clean air and a range of toxic, noxious, and corrosive gases from various commercial and industrial applications.

Accessories

• A range of upstands are available. Contact your local Fantech Trade branch for information.

Dimensions & Specification

Hunter HVLS & Commercial Sweep Fans

The Hunter range of innovative, direct-drive HVLS fans thoroughly mix air within an indoor space to eliminate uneven temperatures and provide a cooling effect. They utilize blade designs that maximize efficiency across the entire range of impeller sizes, delivering high airflow rates while minimizing power consumption.

Hunter HVLS fans feature a contemporary design, a time-saving plug-n-play system for quick installation, and are suitable for warehouses, gymnasiums, school halls, and commercial facilities.

Hunter Titan/Eco HVLS (High Volume Low Speed) Fans

The Hunter range of innovative, direct-drive HVLS fans use a unique aerofoil blade design with a twist profile that maximizes efficiency. This advanced blade design delivers a higher volumetric flow rate while minimizing power consumption. Its high-performance direct drive motor helps to minimize energy usage and reduce the fan's overall weight.

• Energy-efficient and compact direct drive, permanent magnet motor designed for Hunter HVLS fans.
• Time-saving plug-n-play system includes pre-installed bolts, pre-wired drop tube, pre-aligned mounting brackets, and I-beam clamp.
• Whisper-quiet gearless operation.
• Aircraft-grade aluminum blades are formed with a unique twist profile to maximize airflow and minimize noise levels.
• Easy-to-use controller.
• Comes with pre-configured VSD with simple push and turn plugs to connect motor and touchscreen.
• Built tough with a sleek and simple design.
• Hunter Titan: 5-blade configuration, 5 sizes from 4.2m to 7.3m.
• Hunter Eco: 4-blade configuration, 8 sizes from 2.4m to 7.3m.

Dimensions

All-In-One Adjustable Downrod

The Hunter fans feature an all-in-one adjustable downrod to reduce installation time. It is pre-wired with power and safety cable, comes with guide-wires for extra stability, and has an integrated motor mounting plate with a quick connect clamping system.

Controllers for Hunter Titan, Eco and RM HVLS Fans

These touchscreen controllers manage one or multiple Hunter HVLS fans and sensors, utilizing the latest digital technology for high-ceiling applications. Optional BMS BACnet gateway modules are available.

700E Series Touchscreen Controller

• Controls up to 30 fans
• Fan grouping, program scheduling, fan and group naming, password protection
• Intuitive graphic user interface
• Fan diagnostics on screen
• Speed control in forward and reverse
• Includes two temperature & humidity sensors

500 Series Touchscreen Controller

• Controls up to 30 fans
• Fan grouping, program scheduling, fan and group naming, password protection
• Intuitive graphic user interface
• Fan diagnostics on screen
• Speed control in forward and reverse

350 Series Touchscreen Controller

• Controls up to 10 fans as one group
• Intuitive graphic user interface
• Fan diagnostics on screen
• Speed control in forward and reverse

Hunter RM Series HVLS (High Volume Low Speed) Fans

The Hunter RM series of HVLS fans are designed for hassle-free and cost-saving installations. Engineered with a direct drive motor and single-phase input, the RM comes with a pre-wired drop tube that uses a self-levelling and quick-connect mounting system. It suits large indoor facilities like warehouses, workshops, and gymnasiums.

• Available in 4 sizes: 2400mm, 3000mm, 3600mm & 4200mm diameter.
• Energy-efficient and compact, single-phase direct drive permanent magnet motor.
• Blades are formed with a unique twist profile to maximize airflow and minimize noise levels.
• Time-saving plug-n-play system includes pre-installed bolts, and pre-wired rigid drop tube.
• Highly efficient 4-blade configuration.
• Comes with a pre-configured proprietary VSD.
• Powder-coated steel rigid drop tube with mounting bracket. Extruded blades and motor hub are made from aluminum.

Hunter RM Series Rigid Downrod

Rigid all-in-one, pre-wired downrod reduces installation time with a quick-connect clamping plate. It is pre-wired with power and safety cable, requires no guide wires, and has an integrated motor mounting plate.

Selecting Your HVLS Fan

Fantech has developed an easy-to-use web-based selection tool to assist in selecting the most effective Hunter HVLS fan for your specific application. Enter the width, length, and height of the area, along with the ambient temperature and desired cooling effect. The tool will provide options including the quantity of fans, fan sizes, and suggested spacing.

Fan Selection Program

*Effective range area is based on 1.5 to 2 m/s air flow at face/chest level. # Total fan hang weight. Included blades, motor, hanging system, accessories.

Hunter Trak Commercial Sweep Fans

The Hunter Trak is an easy-to-install, single-phase DC commercial HVLS fan combining modern design, durability, and reliable performance.

• Energy-efficient, 8-speed single-phase DC motor, operable in forward or reverse.
• Suitable for indoor and undercover outdoor commercial applications (restaurants, retail, meeting areas, patios, schools, health clubs).
• Time-saving plug-n-play system with pre-installed components.
• Standard 30cm stainless steel and powder-coated downrod (no guide wires required). Optional downrods: 61cm, 90cm, 121cm, 152cm.
• Highly efficient 4-blade configuration with an 18° blade pitch for optimal air movement.
• Powder-coated matte black finish standard; white and silver grey available by special order.
• Wireless wall controller for easy installation and management of multiple Hunter Trak fans within a 25-meter radius.

Specifications

All dimensions in mm. *300mm downrod comes standard. 610mm, 900mm, 1210mm & 1520mm also available. *Conditions apply. For details visit: fantechtrade.com.au/warranty

Hunter Trak Downrod

The Hunter Trak uses an all-in-one downrod to simplify installation. It is pre-wired with power and retention cable, features an integrated motor mounting plate, and a self-levelling mount bracket.

Hunter Stingray Commercial Sweep Fans

The Hunter Stingray combines a high-performance sweep fan with a stylish, modern design. It features a 1.5-meter fan diameter with optimized blade pitch for efficient air movement. The Stingray offers an integrated LED light option and comes in charcoal grey or porcelain white finishes.

Typical applications include indoor residential and commercial spaces such as open-plan living areas, restaurants, retail spaces, meeting areas, foyers, patios, and schools.

• Quiet DC motor, operable in forward or reverse.
• IP45 rated for use in outdoor undercover areas.
• Optional 18-watt dimmable LED light (can be capped if not required).
• Pre-balanced for smoother, low-noise operation.
• Comes standard with 5cm and 23cm downrods.
• Wireless controller for speed adjustment, light dimmer, and management of multiple Stingray fans within a 25-meter radius.

Dimensions