mailto:sales@appconwireless.com
Appconwireless,Professional IoT solution,LoRa radio solution,LoRaWAN solution,Radio data moduleAppconwireless,Professional IoT solution,LoRa radio solution,LoRaWAN solution,Radio data module
User Manual for Appcon Wireless models including: YRS-10CL Wireless Temperature Sensor, YRS-10CL, Wireless Temperature Sensor, Temperature Sensor, Sensor
File Info : application/pdf, 11 Pages, 843.29KB
DocumentDocumentWireless Temperature Sensor YL-104 Wireless Temperature Sensor YL-104 VersionV1.0 1 / 11 Wireless Temperature Sensor YL-104 Catalogue 1Product Overview ....................................................................................................................3 2Sensor Specifications ...............................................................................................................4 3Dimemsion of the Tag. ............................................................................................................5 4Structure of the sensor and installation method.......................................................................5 5Parameter configuration...........................................................................................................6 6Display the sensor data by SSCOM.........................................................................................8 7Communication Protocol. ......................................................................................................10 2 / 11 Wireless Temperature Sensor YL-104 1Product Overview Adopt high-performance low-power single-chip ASR6601, taking into account sensor data acquisition and wireless data transmission. Built-in low-power high-precision digital temperature and humidity sensor chip, measurement and accuracy range: Temperature: ±1°C (max) @-10 to 85°C, -40 to +125°C Wireless data transmission uses LoRa and NB-IoT solutions: LoRa solution (YL-104): Based on Semtech's low-power long-distance LoRa spread spectrum wireless data transmission scheme Sx1262, it has a sleep wireless wake-up function with a signal coverage of 2km. Built-in 2300mAH rechargeable lithium battery, long battery life, reusable. The card type is ultra-thin design, small in size and easy to install. It is widely used in communication equipment room, workshop production line, drug warehouse, large-scale logistics warehouse, agricultural greenhouse, greenhouse flower greenhouse, archives, museum, HVAC control and other IoT application scenarios that require temperature and humidity monitoring and alarming. 3 / 11 Wireless Temperature Sensor YL-104 2Sensor Specifications Type of wireless Frequency Range Power Port Temperature measurement Sleep power consumption Parameter configuration Sample period Alarm threshold size and weight LoRa solution NB-IoT solution 433MHz868MHz915MHz All bands 2 km line of sight NB-IoT network coverage Built-in2300mAh rechargeable lithium battery (high and low temperature battery is optional) Magnetic socket -20~80°C (conventional lithium battery), -40~80°C (low temperature lithium battery), -40~85 degrees (lithium battery), ±1°C; 10uA UART-TTL (Mini-USB connector form) with magnetic socket. Timing report, the minimum can be set for 1 minute, the longest is 60 minutes, if not set, it will not be reported. The temperature alarm value can be set. When an alarm occurs, it will be reported three times within 1 minute; if it is not set, it will not be reported. 104.5*69.5*11.3mm, 85g (with lithium battery) 4 / 11 5 Wireless Temperature Sensor YL-104 3Dimemsion of YL-104. 104,50 69,50 2 4Structure of the sensor and installation method When installing the sensor, try to make the antenna perpendicular to the horizontal plane, and the wireless communication is the best. 5 / 11 Wireless Temperature Sensor YL-104 5Parameter configuration The company provides parameter setting software for this sensor (LoRa version), wireless parameters such as frequency, period, node ID, network ID, and transmission power. After connecting the sensor to the computer through the USB-TTL data cable (mini-USB connector), the sensor is in the setting state, open the "Tool for LoRa module V1.0", click "com", select the com port number The COM port, with a baud rate of 115200, No parity. The default baurate of YL-104 is 115200bps, No parity. 6 / 11 Wireless Temperature Sensor YL-104 In the ,,basic config, There are Frequency, Period, Net ID, Node ID, Work Mode, RF-Factor, RF-Coding, RF-BW and power are necessary for the debug. 7 / 11 Wireless Temperature Sensor YL-104 Parameter Frequency Protocol Ver Node ID Net ID Output power Period Work Mode RF-Factor RF-Coding RF-BW Write Read Enter Update FoTa Data Display Description 433MHz, 868MHz, 915MHz V10, V20 0-255 0-255 Level 7 6 5 4 3 2 dBm 19.5-20 17.5-18 14.5-15.5 11.5-12.5 8.5-9.5 5.5-6.5 mA 110-120 90-100 60-70 45-55 40-45 30-40 0-60minsset0means the YL-104 is closed. Transparent, Central, Slave 5_32, 6_64, 7_128, 8_256, 9_512, 10_1024, 11_2048, 12_4096 4/5, 4/6, 4/7, 4/8 62.5K, 125K, 250K, 500K Write the parameter. Read the parameter. Enter the upgrade mode Enter the Fota upgrade the YL-104 Read the temperature data of YL-104 or display the data by serials 1 5.5-6.5 30-40 After the sensor parameters are configured, disconnect the data line to put the sensor into operation. 6Display the sensor data by SSCOM The company provides the RF6610T LoRa data transmission module. Users need to set the RF6610T as Central mode, The Breath of YL-104 should be the same as the net ID, RF-Factor, RF-Coding, RF-BW of RF6610T. The Frequency and the Net ID should be the same for both YL-104 and RF6610T. After the configuration finish, RF6610T can be used as the host computer module to communicate with the sensor and display the sensor data via SSCOM. After finish the configuration, please close the serial port of RF tool. 8 / 11 Wireless Temperature Sensor YL-104 Users configure Frequency, Net ID, work mode, RF_Factor, RF_Coding and RF_BW for RF6610T. RF mode should be 'Central' mode. The frequency, Net ID, RF_Factor, RF_Coding and RF_BW should be same for both RF6610T and YL-103. Otherwise YL-103 and RF6610T will not communicate with each other. Appconwireless provides USB adapter cable, which can connect the TTL host computer module to the computer USB interface for data acquisition. The sensor data can display by SSCOM The computer module has dedicated parameter configuration software, and the wireless parameters (Frequency, Breath time, Net ID) need to be set to be consistent with YL-104. 9 / 11 Wireless Temperature Sensor YL-104 7Communication Protocol. The transmitted data format of YL-103: ID (Net ID(1byte)+ Node ID(1byte)) + 18b20 sensor Data(LSB+MSB) (2byte) + Bat(1byte) The output data format of RF6610T: ID (Net ID(1byte)+ Node ID(1byte)) + 18b20 sensor Data(LSB+MSB)(2bytes) + Bat(1byte) + RSSI(1byte) When the RSSI value is lower than 7E, the signal is weak. 10 / 11 Wireless Temperature Sensor YL-104 APPCON WIRELESS TECHNOLOGY CO.,LTD Add: 28#, Longjin road,Xili zone, Nanshan District Shenzhen P.R.C(518043) TEL: +86-185 0309 2598 FAX: +86-755-83405160 Email: sales@appconwireless.com Web: http://www.appconwireless.com AppconWireless technology reserves the right to make corrections, modifications, improvements and other changes to its products and services at any time and to discontinue any product or service without notice. Customers are expected to visit websites for getting newest product information before placing orders. These products are not designed for use in life support appliances, devices or other products where malfunction of these products might result in personal injury. Customers using these products in such applications do so at their own risk and agree to fully indemnify AppconWireless technology for any damages resulting from improper use 11 / 11