JVC LT-28FD100 LED TV
User Manual
Safety Warnings and Precautions
General Warnings:
- This appliance is intended for domestic use only. Any other use, or use for other applications, such as commercial use, is prohibited.
- Ensure adequate ventilation: Leave at least 10 cm of free space around the product to prevent ventilation openings from being blocked by objects like newspapers, tablecloths, or curtains.
- Do not place sources of open flames, such as lit candles, on the appliance.
- Dispose of used batteries safely and in accordance with local regulations to protect the environment.
- This appliance is not intended for use in tropical climates.
- Do not expose the appliance to dripping water or splashes. Do not place objects filled with liquid, such as vases, on the appliance.
- Recycle used batteries at designated collection points.
- Do not expose batteries to excessive heat, such as from the sun or fire.
- Caution: Risk of explosion if batteries are replaced incorrectly. Replace only with the same or equivalent type.
- Ensure the power plug or appliance socket used as a disconnect device remains readily accessible.
- Never place a television in an unstable location. A falling television can cause serious injury or death. Take simple precautions, especially for children: Use cabinets or stands recommended by the manufacturer, ensure furniture can safely support the TV, and prevent the TV from overhanging the edge of the support furniture. Anchor furniture and the TV if placing on high furniture. Avoid placing the TV on fabrics or other materials between the TV and support furniture. Educate children about the dangers of climbing furniture.
Important Safety Instructions:
- ATTENTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN. Do not disassemble the cabinet; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
- The CE marking indicates compliance with European directives for radio equipment, safety, health, and environmental protection.
- Read and keep these instructions.
- Do not use near water.
- Clean only with a dry cloth.
- Do not install near heat sources like radiators or stoves.
- Unplug during thunderstorms and prolonged periods of non-use.
- Class II equipment designation.
- The symbol indicating important operating and maintenance instructions are in the manual.
- The symbol indicating dangerous voltage is present.
- When cleaning, unplug the power cord and wipe gently with a soft cloth. Do not spray liquids directly onto the TV. Do not use chemical substances like alcohol, thinners, or benzene for cleaning.
- Install in a well-ventilated area. Do not install in confined spaces like bookshelves. Do not cover the appliance with fabric or other materials when plugged in. Avoid excessively dusty locations.
- Do not press the screen hard with your hand or sharp objects. Do not scratch the screen.
- Prevent the appliance from impacts and do not let objects fall into it or onto the screen.
Product Description and Assembly
Front and Side Views:
The TV features a screen (1) and stands (2). The front panel includes an earphone jack (3), CI slot (4), MINI YPBPR IN (5), USB port (6), and HDMI ports (7).
Bottom View:
Ports include AV IN (VIDEO/AUDIO L/R) (9), COAXIAL DIGITAL OUTPUT (10), and RF IN (11). Button for power/standby (8).
Assembly:
Attaching the Feet: Place the screen face down on a soft, flat surface to protect the screen from scratches before attaching the feet. Ensure screws are tightened firmly but not excessively.
Wall Mounting: Before wall mounting, remove the feet by reversing the installation procedure. The wall mount hole spacing is 100 mm wide. Use appropriate screws (M4 x 8, not supplied) and tighten them securely to prevent the TV from tilting forward.
Remote Control
The remote control (model RM-C3310) provides access to all TV functions. Key buttons include:
- Power/Standby: Turns the TV on or off.
- MUTE: Silences the audio.
- PMODE: Accesses Picture Mode settings.
- SMODE: Accesses Sound Mode settings.
- FAV: Displays favorite channels.
- SLEEP: Sets sleep timer.
- Numeric Buttons (0-9): Change channels.
- -/--: Used for number entry.
- Previous Channel: Returns to the previous channel.
- VOL+/-: Adjusts volume.
- CH+/-: Selects channels.
- CH.LIST: Displays channel list (ATV/DTV).
- ASPECT: Changes aspect ratio.
- EPG: Displays the electronic program guide.
- AUDIO: Selects audio track.
- MENU: Accesses TV settings.
- EXIT: Closes menus.
- ENTER: Confirms selections.
- SOURCE: Selects input source.
- DISPLAY: Shows program information.
- TEXT: Accesses teletext.
- USB Controls: Fast Rewind (◄◄), Fast Forward (►►), Play/Pause (II), Stop.
Remote Control Battery Installation:
Open the battery compartment cover. Insert two AAA batteries (not supplied), observing polarity. Close the cover. Do not mix new and used batteries. Remove batteries if the remote will not be used for an extended period.
Connections
The TV supports various connections:
- AV IN: For composite video and stereo audio (L/R).
- HDMI ports: For high-definition video and audio.
- HDMI ARC (Audio Return Channel): Allows audio to be sent from the TV to an ARC-compatible audio device (e.g., soundbar, AV receiver) via a single HDMI cable, eliminating the need for a separate audio cable. Ensure HDMI ARC is enabled in the TV's configuration menu.
- RF IN: For antenna or cable connection.
- COAXIAL DIGITAL AUDIO OUT: For digital audio output.
- EARPHONE: For connecting headphones.
- USB Port: For connecting USB storage devices.
- CI SLOT: For a Common Interface module.
- MINI YPBPR IN: For component video input.
Diagrams illustrate connections for VCR, Blu-ray player, antenna, and audio systems using various cables.
Using Your TV
Powering On/Off:
Connect the power cord. The TV enters standby mode with a red LED indicator. Press the power button on the TV or remote to turn it on; the LED turns blue.
Initial Setup:
When first powered on, a setup wizard guides you through selecting language, country, and environment (Home or Store mode). Use the arrow keys to navigate and ENTER to confirm.
Selecting Input Source:
Press the SOURCE button on the remote to display the input list. Use the arrow keys to select the desired source (DTV, ATV, AV, Component, HDMI 1, HDMI 2, Media) and press ENTER to confirm.
Electronic Program Guide (EPG):
The EPG provides program information. Press the EPG button on the remote to access it. Use arrow keys to navigate channels and buttons (Red, Green, Yellow, Blue) to record, set reminders, or view previous/next day's programs.
Digital Teletext (DTV):
In DTV mode, press TEXT to display teletext. Use arrow keys to select page numbers and ENTER to navigate. Press TEXT again to exit.
Recording:
Insert a formatted USB storage device. In DTV mode, press the record button to record the current program. Recording stops automatically when the USB device is full. The maximum USB capacity is 1TB. A minimum transfer speed of 5 MB/s is recommended for smooth recording.
Troubleshooting
| Problem | Possible Solution |
|---|
| Screen does not turn on or display anything. | 1. Check if the power plug is securely inserted into the wall socket. 2. Verify the appliance is receiving power. 1. Press the MUTE button. 2. Increase the volume using the volume buttons. |
| Image displays, but there is no sound. | 3. Check if the audio connector from your external source is correctly connected. 4. Verify audio cables are properly connected. 5. Select and check other inputs. |
| Image is noisy or of poor quality. | Stop using cordless phones, hair dryers, and other electrical appliances near the TV. |
| The remote control does not work. | 1. Check if the TV is powered on. 2. Ensure the remote control batteries are correctly inserted. 3. Check for obstacles between the TV's signal sensor and the remote. Remove them if necessary. 4. If batteries are worn out, replace them with two new batteries of the same type. |
Specifications
| TV Broadcasting | Details |
|---|
| TV Broadcasting | PAL, B/G, D/K, I, SECAM, L/L |
| Channel Reception | ATV (48.25MHz ~ 863.25MHz) |
| Preset Channels | 99 |
| Channel Indicator | On-screen display |
| RF Antenna Input | 75 ohms (unbalanced) |
| Operating Voltage | AC 100-240 V~ 50/60 Hz (alternating current) |
| Audio Output Power (WRMS, THD 10%) | 2 x 6 W |
| Dimensions W x H x D (with stand) | 183 x 636 x 425 mm |
| Weight (with stand) | 3.45 kg |
| Dimensions W x H x D (without stand) | 76 x 636 x 386 mm |
| Weight (without stand) | 3.40 kg |
| Ambient Temperature | Operation: 5°C~40°C / Storage: -20°C~60°C |
| Operating Humidity | Relative humidity below 80% |
| Standby Mode | After 4 hours |
| Digital Reception | |
| Reception Range | VHF (50 MHz~230 MHz) - UHF (474 MHz~862 MHz) |
| Input Impedance | 75Ω |
| Channel Bandwidth | 7MHz/8MHz |
| Modulation | DVB-T: COFDM 2K/8K,QPSK,16QAM,64QAM
DVB-C: 16QAM, 32QAM, 64QAM, 128QAM,256QAM |
| Video System | MPEG-2 MP@ML, MPEG-2 MP@HL, H.264 |
| Audio System | MPEG-1 layer ½, Dolby Audio |
| Basic Functions | Electronic Program Guide, Subtitles, LCN, Teletext (Europe) |
| Max. Storable Channels | 700 CH (DVB-T + DVB-C, dynamic) |
Product Information Sheet (Labeling):
| Information | Value and Precision | Unit |
|---|
| Supplier Name/Brand | JVC | |
| Model Reference | LT-28FD100 | |
| Energy Efficiency Class (SDR) | F | |
| On-mode Power Consumption (SDR) | 26 | W |
| Standby Power Consumption | 0.28 | W |
| Networked Standby Power Consumption | N/A | W |
| Electronic Display Device Category | Television | |
| Aspect Ratio | 16 : 9 | |
| Screen Resolution (pixels) | 1366 x 768 | pixels |
| Screen Diagonal | 71 cm (28 inches) | |
| Visible Screen Area | 20961 | cm² |
| Display Technology | LED LCD | |
| Automatic Brightness Control (ABC) | NON | |
| Voice Recognition Sensor | NON | |
| Presence Sensor | NON | |
| Image Refresh Rate | 60 | Hz |
| Power Supply Type | Internal | |
Disposal
As a responsible distributor, JVC emphasizes environmental protection. Please follow correct procedures for disposing of the appliance, batteries, and packaging. This helps conserve natural resources and ensures recycling is done in a health- and environmentally-friendly manner.
Dispose of the product and its packaging according to local laws and regulations. Electronic components and batteries must be disposed of separately from household waste at the end of the product's life.
For information on disposal and recycling procedures, contact your local authorities. Local collection points may accept products for recycling, sometimes free of charge.
Hotlines:
- Darty France: +33 0 978 970 970 (local call cost)
- Vanden Borre: +32 2 334 0000 (Mon-Fri 8am-6pm, Sat 9am-6pm)
Small inconsistencies may appear in these instructions due to continuous product improvements. We apologize for any inconvenience.
© Etablissements Darty & fils, 129 Avenue Gallieni, 93140 Bondy, France (09/12/2020)
