DOMETIC DG3 GYRO STABILIZER
MARINE STABILIZATION
Enhancing user comfort through a wider range of conditions and extending overall time spent on the water, the DG3 utilizes the latest technology to provide a premium stabilization experience.
Key Advantages
- Industry Leading: First active gyro for the recreational market.
- Future Proof Design: All-electric precession actuator.
- Maintenance Free: Robust bearings and superior cooling.
Why Choose the Dometic DG3 Gyro Stabilizer?
Introducing the first truly active gyro on the recreational market, the DG3 boasts industry-leading spin-up and down times, coupled with a remarkable 40% reduction in power consumption. The DG3 is compatible with 12, 24, or 48V systems and connects seamlessly to multi-function displays via a simple Ethernet connection. It is virtually maintenance-free, with the elimination of hydraulics, incorporation of a titanium heat exchanger, and utilizing sealed needle bearings where bushings are traditionally used, ensuring durability.
Key Features
- Industry-leading Spin Up/Down Time
- All-electric precession actuator technology
- Dynamic Precession: Ability for the electric precession actuator to adapt to the sea state.
- First truly active gyro on the recreational market
- 40% reduced power consumption
- 12, 24, or 48V compatible
- Simple Ethernet connection to MFD
- No hydraulics
- Titanium heat exchanger
- Improved cooling for longer bearing life
Component Highlights
Enhanced Bearing Life
Achieved through the use of larger bearings, optimized configuration, and better cooling methods.
Electric Precession Actuator
The all-electric precession actuator eliminates hydraulics and responds effectively to a wider range of sea conditions.
High Performance Brushless DC Motor
Features custom-designed components developed in-house.
Technical Specifications
| Operating Speed | 4700 RPM |
| Angular Momentum at Operating Speed | 3,000 N-M-S |
| Max Anti-rolling Torque at Operating Speed | 8,000 N-M |
| Spool-up Time to Operating Speed | 16.5 minutes (4,700 RPM) |
| Spool-up Time to Stabilization | 9.5 minutes (2,720 RPM) |
| Spin-down Time | 16.5 minutes |
| Operating Power @ 12V | 260-750 Watts (Sea State dependent) [22 - 63A] |
| DC Power Input | 12, 24, or 48VDC |
| 48V Spin Battery (Included) | 10.2L x 7.1W x 10.8H (inches) |
| Weight | 580 LBS (263.04 KG) |
| Envelope Dimensions | 27.1 L x 27.2 W x 23 H (inches) / 0.688 L x 0.690 W x 0.584 H (meters) |
| Noise Output | <72 dBC at 1 meter |
| Seawater Supply to Heat Exchanger | 2 GPM (7.6 LPM) minimum / 6 GPM (22.7 LPM) maximum |
Connections
- Power: 4x M8x1.25 studs
- CAN communication: M12 5-way male keyed 'A'
- Ethernet communication: M12 4-way female keyed 'D'
Environmental
- Operating Temperature: 32° - 140° F (0° - 60° C)
- Water ingress protection: IP67
Warranty
- Warranty Period: 3-Year/3000hr standard warranty
Dimensions
The Dometic DG3 Gyro Stabilizer has the following approximate dimensions and installation considerations, based on technical drawings:
- Overall Width: Approximately 27.1 inches (0.688 meters)
- Overall Depth: Approximately 27.2 inches (0.690 meters)
- Overall Height: Approximately 23 inches (0.584 meters)
- Longitudinal Stringer Distance (minimum): Approximately 22-9/16 inches
- Minimum Vertical Clearance: Approximately 8-1/2 inches
- Lifting Points: M10x1.5 thread
- Clearance to Moving Cables: Approximately 0.48 inches
The provided diagrams illustrate front, top, side, and isometric views, detailing mounting hole locations and essential clearances for proper installation.
