Instruction Manual for PUTCO models including: ELS-1-24-23, 581001I, ELS-1-24-23 Element Sky View, Element Sky View, Sky View
ELEMENT SKY VIEW INSTALLATION INSTRUCTIONS Congratulations on your purchase of a high quality PUTCO product. Should you need any application or technical assistance, feel free to call us at: 1-800-247-3974 Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time) Contact your PUTCO dealer for other quality accessories. Please read all instructions before installation and to check to see that all parts are included. CONTENTS: Description Element Sky View Panel Foam Weather Seal Velcro Strip No Tools Needed! Qty. 1 2 2 ELS -- 1/24/23 Page 1 of 5 581001I Installation Instructions: 1. Remove the front section of the factory hard top. 2. Remove the Velcro strip from the foam seal and attach to the vehicle above the door frame. ELS -- 1/24/23 Page 2 of 5 581001I 3. Attach the foam seal to the Velcro on the vehicle. 4. Place the Sky View roof panel on the vehicle. ELS -- 1/24/23 Page 3 of 5 581001I 5. Turn the front wing latches then close the two front clamps. 2 1 1 2 6. Turn the Rear wing clamps starting with the center two clamps. 2 1 1 2 Your new Element Sky View is now success- fully installed on your vehicle! ELS -- 1/24/23 Page 4 of 5 581001I ELEMENT SKY VIEW ROOF PANEL CARE INSTRUCTIONS · Do NOT use chemicals or abrasives on the clear roof panel. · Use only water and wipe GENTLY with a microfiber towel for cleaning. Applying too much pressure can scratch the Element Sky View roof panel. · When taking the Element Sky View roof panel through a car wash, use only a TOUCHLESS car wash. The brushes in a regular car wash can scratch the Element Sky View roof panel. ELS -- 1/24/23 Page 5 of 5 581001IMicrosoft Publisher for Microsoft 365