Instruction Manual for HALCYON models including: EX330 USTSL LED Inground, EX330 USTSL, LED Inground, Inground
OUTLINE DIMENSION EX330 USTSL LED INGROUND BOM - Colour Temperature: 2700k - Input Voltage: 24V DC Constant Voltage (wire in parallel) - Ingress Protection Rating: IP67 - The mounting sleeve and luminaire must be installed over a drained substrate e.g. Scoria so that the LED luminaire is never immersed in water for extended periods (See diagrams pg2) - To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account. - Always try to use a Constant Voltage Driver which is double the total circuit wattage. - Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits. - All cable joints must be a resin or IP68 type - NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods. - Luminaire front faces are all electropolished 316 grade Stainless Steel. - Applicable environment temperature: -20°C .... +40°C - All installation work must be carried out by a registered electrician. EX330 USTSL MUST BE INSTALLED OVER A DRAINED SUBSTRATE 00 40 00 40 SPECIFICATIONS 90% 2× 0 Item No. 0 Reflector Input voltage(V) 40 4 0 4 0Adobe Illustrator CS5 Adobe PDF library 9.90