ℹ️ Document Conversion Notice:
This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.
Sennheiser RS 160 Digital Wireless Headphone System
Instruction Manual
Important Safety Information
Read this instruction manual carefully and completely before using the product. Always include this instruction manual when passing the product on to third parties. Do not use an obviously defective product.
Preventing damage to health and accidents
WARNING: Protect your hearing from high volume levels. Permanent hearing damage may occur when headphones are used at high volume levels for long periods of time. Sennheiser headphones sound exceptionally good at low and medium volume levels.
Keep the headphones at least 10 cm (3.94") from cardiac pacemakers or implanted defibrillators. The headphones contain magnets that generate a magnetic field which could cause interference with cardiac pacemakers and implanted defibrillators.
Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents and choking hazards.
Do not use the product in situations which require special attention (e.g., in traffic or when performing skilled jobs).
Preventing damage to the product and malfunctions
Always keep the product dry and do not expose it to extreme temperatures to avoid corrosion or deformation. The normal operating temperature is from 0 to 40°C (32 to 104°F).
Use only attachments/accessories/spare parts supplied or recommended by Sennheiser.
Unplug the power supply unit from the AC wall outlet if not using the product for extended periods.
Varnish or furniture polish may degrade the feet of the transmitter, which could stain your furniture. Place the transmitter on a non-slip pad to avoid potential staining.
Do not place your headphones on a glass dummy head, chair armrest or similar objects for long periods as this can widen the headband and reduce the contact pressure.
Clean the product only with a soft, dry cloth.
Intended Use/Liability
This wireless headphone system is suitable for use with portable devices, hi-fi systems, TV sets, and home cinema systems. Improper use includes any application not named in this instruction manual and associated product guides. Sennheiser does not accept liability for damage arising from abuse or misuse of this product and its attachments/accessories.
Replacement Parts
When replacement parts are required, ensure the service technician uses parts specified by Sennheiser or those having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Instructions for Standard/Rechargeable Batteries
WARNING: In extreme cases, standard/rechargeable batteries may leak and cause hazards if abused or misused, including explosion, fire, heat, and smoke/gas.
Symbol/Instruction
Meaning
Keep away from children.
Keep away from children.
Do not heat above 70°C/158°F, e.g., do not expose to sunlight or throw into a fire.
Do not heat above 70°C/158°F, e.g., do not expose to sunlight or throw into a fire.
Do not expose to moisture.
Do not expose to moisture.
When not using rechargeable batteries for extended periods, charge them regularly (about every 3 months).
When not using rechargeable batteries for extended periods, charge them regularly (about every 3 months).
Do not mutilate or dismantle.
Do not mutilate or dismantle.
When not using the product for an extended period, remove the standard/rechargeable batteries.
When not using the product for an extended period, remove the standard/rechargeable batteries.
Observe correct polarity.
Observe correct polarity.
Use only rechargeable batteries and chargers recommended by Sennheiser.
Use only rechargeable batteries and chargers recommended by Sennheiser.
Pack/store standard/charged rechargeable batteries so that terminals cannot contact each other – danger of shorting out/fire hazard.
Pack/store standard/charged rechargeable batteries so that terminals cannot contact each other – danger of shorting out/fire hazard.
Do not continue using defective standard/rechargeable batteries and dispose of them immediately.
Do not continue using defective standard/rechargeable batteries and dispose of them immediately.
Switch battery-powered products off after use.
Switch battery-powered products off after use.
Immediately remove standard/rechargeable batteries from an obviously defective product.
Immediately remove standard/rechargeable batteries from an obviously defective product.
Charge rechargeable batteries at ambient temperatures between 10 and 40°C/50 and 104°F.
Charge rechargeable batteries at ambient temperatures between 10 and 40°C/50 and 104°F.
Dispose of standard/rechargeable batteries at special collection points or return them to your specialist dealer.
Dispose of standard/rechargeable batteries at special collection points or return them to your specialist dealer.
Do not charge standard batteries.
Do not charge standard batteries.
Do not mix standard and rechargeable batteries in the battery compartments.
Do not mix standard and rechargeable batteries in the battery compartments.
The RS 160 Digital RF Headphone System
The RS 160 is an RF stereo hi-fi headphone system with comprehensive technical features. Its transparent and balanced sound image with excellent bass response makes this system an ideal choice for hi-fi, home cinema, and TV use. Enjoy total freedom of sound, stylish design, and maximum comfort.
Additional Features of the RS 160 Headphone System
Transmits uncompressed audio over a robust 2.4 GHz digital link, enabling enjoyment of music without cables.
Dynamic transducer systems with powerful neodymium magnets deliver clear and detailed audio reproduction.
Kleer's uncompressed digital wireless transmission delivers CD-quality sound.
No set-up required – just plug and play. Connect the transmitter to your personal audio/video player, put on the headphones, and turn it on.
TR 160 transmitter with multi-receiver capability, enabling up to 4 people to listen to the same sound source.
Kleer™ Wireless Transmission Technology
The RS 160 headphone system features digital wireless audio transmission technology from Kleer. Kleer has developed an RF-based wireless transmission standard that offers lossless audio transmission in CD-quality while consuming minimal power.
Delivery Includes
1 HDR 160 headphones
1 TR 160 transmitter
1 Power supply unit with country adapters
1 Stereo audio cable with 3.5 mm jack plugs
1 DC cable (4.0 mm DC jack socket to 2 x 4.0 mm DC plug)
The HDR 160 headphones feature a headband (1), ear pads (2), and battery compartments (3). On the right ear cup, there are controls and indicators: VOLUME + button (4), Multi-function button (5), VOLUME - button (6), Charging socket (DC 5V 0.6A) (7), and Multi-function LED (8). The multi-function button (5) allows switching the headphones on/to standby mode, setting multi-user operation, muting, and associating the headphones.
Overview of the TR 160 Transmitter
The TR 160 transmitter has a Multi-function button (1), Multi-function LED (2), Socket for power supply unit (DC 5V 0.6A) (3), Audio input (AUDIO IN) (4), and VOLUME control (- +) (5). The multi-function button (1) allows switching the transmitter on/to standby mode, setting multi-user operation, and associating the transmitter.
Overview of the Indicators and Acoustic Signals
Meaning of the pictograms for the different LEDs
Status
Meaning
LED lit
The LED is lit.
LED flashes once per second
The LED flashes once per second.
LED flashes twice every 5 seconds
The LED flashes twice every 5 seconds.
Indicators on the Headphones (Multi-function LED 8)
Status
Meaning
Flashing green (1s)
The rechargeable batteries are almost flat.
Solid orange
The rechargeable batteries are being charged.
Off
The rechargeable batteries are fully charged.
Flashing green (1s)
The headphones are in enrollment mode (searching for a transmitter to pair with).
Flashing green (5s)
The headphones are in association mode (exchanging device information with the transmitter).
Solid green
The headphones receive an audio signal.
Indicators on the Transmitter (Multi-function LED 2)
Status
Meaning
Solid red or flashing red
The signal of the sound source is too strong.
Flashing green (1s)
The transmitter is in enrollment mode (searching for headphones to pair with).
Flashing green (5s)
The transmitter is in association mode (exchanging device information with the headphones).
Solid green
The transmitter is in single-user operation.
Solid green (5s)
The transmitter is in multi-user operation.
Acoustic Signal of the Headphones
Signal
Meaning
1 short beep (low tone)
The minimum volume is reached.
1 short beep (high tone)
The maximum volume is reached.
Overview of the Connection Stages
Connection Establishment
When switching on, the headphones search for a suitable transmitter. The headphones LED flashes green once per second (1s). The transmitter LED flashes green once per second (1s).
Pairing
The headphones and transmitter recognize each other and pair. Both LEDs flash green twice every 5 seconds (5s).
Single-User and Multi-User Operation
By default, the transmitter is set to single-user operation, allowing one pair of headphones to listen to the sound source. Both LEDs flash green twice every 5 seconds (5s).
For multi-user operation (up to 4 headphones simultaneously), the transmitter must be set to multi-user mode. Both LEDs flash green twice every 5 seconds (5s).
Putting the RS 160 into Operation
Setting Up the Transmitter
Choose a suitable place near your sound source (e.g., TV, stereo, home cinema system).
Do not place the transmitter close to metal objects such as shelf bars or reinforced concrete walls, as this can decrease the transmitter's range.
Ensure direct line of sight between the transmitter and the headphones for optimal performance.
Diagram description: A person wearing headphones is seated, listening to audio from a stereo system connected to the TR 160 transmitter. Speakers are also connected to the stereo system. The transmitter is positioned with a clear line of sight to the headphones.
Connecting the Transmitter to a Sound Source
The TR 160 transmitter can connect to various sound sources like a TV, smartphone, or stereo system. Switch your sound source off before connecting the transmitter.
Connect the audio cable to the audio input (4) of the transmitter.
Connect the audio cable (6) to the headphone socket of your sound source.
Adjust the volume on your sound source to a medium level to improve wireless sound transmission quality. Check your sound source settings if necessary.
Diagram description: Top diagram shows the TR 160 transmitter's rear panel with audio input (4) and power socket (3). An audio cable (6) with a 3.5mm jack is shown connecting to the audio input. Bottom diagram shows the 3.5mm jack of the audio cable (6) connected to a portable audio device, with the other end leading to the transmitter.
Powering the Transmitter
The TR 160 transmitter can be powered by: the supplied NT5-6AW power supply unit for stationary use, rechargeable AA size NiMH batteries (1.2 V, at least 1,300 mAh) for mobile use, or standard AA size batteries (1.5 V) for mobile use.
Powering the Transmitter via the Power Supply Unit
Select the suitable country adapter (8) for your wall socket.
Slide the country adapter (8) onto the power supply unit (7) until it locks into place.
Connect the connector (9) of the power supply unit to the socket (3) on the transmitter.
Plug the power supply unit (7) into a wall socket. The transmitter switches on. The multi-function LED (2) flashes green after 9 seconds, indicating the transmitter is in enrollment mode.
Note: You can also connect the charging cable (10) to the connector of the power supply unit to conveniently charge your headphones (see
Sennheiser RS 160 Digital Wireless Headphone System Instruction Manual Discover the Sennheiser RS 160 Digital Wireless Headphone System with this comprehensive instruction manual. Learn about setup, operation, charging, troubleshooting, and specifications for the HDR 160 headphones and TR 160 transmitter, featuring Kleer wireless technology for CD-quality sound.
Sennheiser RS 120-W Wireless TV Headphone System - Instruction Manual Comprehensive instruction manual for the Sennheiser RS 120-W wireless TV headphone system. Covers setup, operation, safety, package contents, product overview, troubleshooting, specifications, and manufacturer declarations.
Sennheiser HDR 175 Digital Wireless Headphones Quick Guide and Safety Information A comprehensive guide for the Sennheiser HDR 175 Digital Wireless Headphones, covering setup, operation, safety precautions, and compliance information. This document provides instructions for inserting and charging batteries, pairing the headphones with the transmitter, adjusting volume and sound settings, and important safety warnings.
Sennheiser IS 410 Cordless Infra-red Stethoset Receiver System: Instruction Manual Comprehensive instruction manual for the Sennheiser IS 410 cordless infra-red stethoset receiver system. This guide covers setup, operation, controls, maintenance, troubleshooting, and technical specifications for optimal use of your audio system.
