Cleaning Guide

Thermometer body

NOTE: Place a new probe cover on the thermometer before cleaning.

Approved cleaning solutions:

• 70% isopropyl alcohol or ethyl alcohol
• Hydrogen peroxide (Virox, Oxivir)
• Quaternary ammonium compounds (CaviWipes™, Clinell Universal Wipes, Sanicloth)
• 10% Chlorine bleach solution

Cleaning Steps:

1. Apply approved cleaning solution to a wipe or cloth.
2. Wipe the thermometer body gently.
3. Ensure the thermometer body is dry.

Drying: Wipe dry. Allow 5 minutes drying time. Make sure thermometer body is dry before use. ⏰

Thermometer contacts

Approved cleaning solutions:

• 70% isopropyl alcohol or ethyl alcohol

Cleaning Steps:

1. Apply approved cleaning solution to a cotton swab.
2. Gently wipe the thermometer contacts.
3. Ensure contacts are clean.

Drying: Place the thermometer aside for 1 minute, allowing the contacts to air dry. ⏰

Lens window and probe

Approved cleaning solutions:

• 70% isopropyl alcohol or ethyl alcohol only!

Cleaning Steps:

1. Apply approved cleaning solution to a wipe or cloth.
2. Gently wipe the probe lens window.
3. Ensure the probe lens window is dry.

Drying: Wipe dry. Allow 5 minutes drying time. Make sure probe lens window is dry before use. ⏰

Product Information

This product is manufactured by Welch Allyn, Inc. under license to the 'Braun' trademark. 'Braun' is a registered trademark of Braun GmbH, Kronberg, Germany. ThermoScan is a registered trademark owned by Helen of Troy Limited.

Document Details:

Document Number: 80025920 Ver. D

Revision Date: 2021-03

©2021 Welch Allyn, Inc. All rights reserved.

Hillrom Technical Support

For support, visit: hillrom.com/en-us/about-us/locations/ [info]

Welch Allyn, Inc. is a subsidiary of Hill-Rom Holdings, Inc.

Distributor Information (DocStock)

DocStock Pty Ltd

ABN: 48 115 268 203

Address: 20/7 Anella Ave, Castle Hill, NSW 2154

Phone: (02) 8850 7177

Fax: (02) 8850 7988

Website: www.DocStock.com.au