ClimaRad | Solution for the necessary energy transition
User Manual for ClimaRad models including: H1C ClimaRad Care Until 2020, H1C, ClimaRad Care Until 2020, Care Until 2020, Until 2020
| ClimaRad
User instructions ClimaRad Care H1C until 2020 The ClimaRad Care H1C device creates the optimum temperature and air quality by heating, cooling, and
File Info : application/pdf, 2 Pages, 1.49MB
DocumentDocumentUser instructions ClimaRad Care H1C until 2020 Operating principle ClimaRad Care H1C The ClimaRad Care H1C device creates the optimum temperature and air quality by heating, cooling, and ventilating with air filtration and heat reclamation. The built-in heat exchanger ensures that hardly any heat is lost during ventilation with outside air. ClimaRad Care H1C Operating the ClimaRad Care H1C The control panel is located on the top of the device. Control panel luchtkwaliteit snelheid AUTO filter vervuild basisventilatie The ClimaRad Care H1C in your room is adjusted optimally by the installer and works completely automatically. This is why we will only explain the function buttons that are relevant for you in daily use. 2022.001 Function Keys AUTO AUTO / Automatic adjustment. The ventilation/heating/cooling in the room is controlled automatically by your ClimaRad ventilation unit, which functions on the basis of CO2 measurement. Use the AUTO + or AUTO - button combinations to set the desired default temperature of your room. You can adjust the desired speed for heating or cooling with the + and the on your control panel. After a period of 4 hours your ClimaRad ventilation unit switches back to the automatic control. Pause. Use this function when you temporarily do not wish to ventilate/heat/cool. After a period of 4 hours your ClimaRad ventilation unit will switch back to automatic control. Maximum. Your ClimaRad ventilation unit will function in the maximum setting. For ventilation, this function can be used to expel unpleasant odours such as smoke or cooking smells. After a period of 4 hours your ClimaRad switches back to automatic control. Ventilation with cooler outside air. Your ClimaRad ventilation unit ventilates with outside air when it is a minimum of 2 Degrees colder than the air in your room. After a period of 8 hours your ClimaRad switches back to automatic control. You can control the speed with the + and -. For example, use this function in the summer when you want to lower the temperature in your warmed room by several Degrees. Child lock. This button combination locks your control panel. Press the indicated buttons simultaneously for 4 seconds. Repeat this action if you want to unlock the control panel. Messages Child lock. The child lock is activated. Error. A fault has occurred. Please contact your installer or housing corporation. Switch off Press 4 seconds simultaneously Dirty filter. Replace the air filters or contact your installer or housing corporation After replacing the filters, press the + and buttons for 6 seconds. Press for 6 seconds ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - info@climarad.com - www.climarad.co.uk - tel. +31 541 358130