TIME SETTING
STANDARD
Crown Positions:
- A: Normal position of the crown.
- C: Position for setting the time.
Diagram shows crown positions (SET, GO) and hand movements for setting time. The SET position is indicated by pulling the crown out. The GO position is when the crown is pushed in.
To Set Time: Pull the crown out to position C. Turn clockwise or anticlockwise to set the time. After resetting, press the crown back to position A.
TOUCH / FUN
Crown Positions:
- Position 2: For setting the time.
Diagram shows crown positions (SET, GO) and hand movements for setting time, with labels "Minute Hour". The SET position is indicated by pulling the crown out to position 2. The GO position is when the crown is pushed in.
To Set Time: Pull the crown to position 2. Turn slowly to correct minutes. Turn quickly to correct hours. After resetting, push the crown back.
DATE OR DAY SETTING
STANDARD
Crown Positions:
- A: Normal position of the crown.
- B: Position for setting the date.
Diagram shows crown positions (SET, GO) and hand movements for setting date and day. The SET position is indicated by pulling the crown out. The GO position is when the crown is pushed in. Examples like "SUN 1" and "MON 2" are shown.
To Set Date: Pull the crown out to position B and turn anticlockwise.
To Set Day: Turn the crown in a clockwise direction.
After resetting, press the crown back to position A.
READJUSTMENT (TOUCH / FUN)
Diagram shows "TEST / OK" with a 5-second indicator. It also shows "ADJUST HAND/+HOUR" and "ADJUST HAND/+MINUTES" with crown positions and hand movements.
Test/OK: Push crown for 5 seconds. If both hands move to 12 o'clock, the test is successful (✔️). Push the crown again, and the hands will return to the current time.
Readjustment: If hands are not exactly at 12 o'clock:
- Pull the crown to position 2.
- Turn clockwise to readjust the hour hand.
- Turn counter-clockwise to readjust the minute hand.
Push the crown back to show the time.
LOOMI FUNCTION: DISPLAY
TOUCH LOOMI
Diagram shows a hand touching the Swatch watch face.
Touch Your Swatch: Activate the Loomi function by touching your Swatch.
Diagram shows "LOOMI ON" with a light indicator and "~4 secs." text.
The Loomi function is activated for approximately 4 seconds.
LOOMI LIGHT FUNCTION
Diagram shows the watch crown with a "* Push" label.
Light Function: Push the crown to activate the light.
POP FUNCTION
Diagrams illustrate different ways to use the POP function: "POP-IN" (standard wear), "POP-OUT" (detaching), and "POP ON CLOTHES" (attaching to fabric).
Note: Wear your Swatch simply with its band or try „popping“ it directly onto your clothes.
TOUCH ALARM
SHOW ALARM TIME
Diagram shows a hand touching the Swatch watch face. The watch hands move to display the alarm time for approximately 4 seconds.
Touch Your Swatch: Hands move to show alarm time for approximately 4 seconds.
STOP ALARM
Diagram shows a hand touching the Swatch watch face to stop an active alarm.
Touch Your Swatch: Touch your Swatch to stop the alarm.
ALARM ON/OFF
Diagram shows crown positions and hand movements indicating how to switch the alarm on or off.
Switch Alarm On/Off: Press the crown. The hands will move to indicate the current mode (on or off). Press the crown again to change the mode.
SET NEW ALARM
Diagram shows crown positions and hand movements for setting a new alarm time.
To Set Alarm Time:
- Pull the crown to position 1. The hands will move to the last set alarm time.
- Turn the crown: turn slowly for minutes, turn quickly for hours.
- Push the crown back. The hands will return to the time display, and the alarm mode will be set to "on".
ALARM DEMO
Diagram shows pressing the crown for 2 seconds to start an alarm demonstration.
Start Alarm Demo: Press the crown for 2 seconds. To stop, press the crown again.
IMPORTANT: When the hands do not correctly show ON/OFF (alarm mode), the Touch Alarm must be adjusted (e.g., after battery change or a hard knock).
TOUCH GAME
Diagram shows a hand touching the Swatch watch face.
Touch Your Swatch:
Diagram shows watch hands coming together at 12 o'clock and rotating, then stopping to show a game result before returning to time.
Hands come together at 12 o'clock and start to rotate at least one full turn. Hands stop by accident and show the result of your game for some seconds, then hands turn back to time.
IMPORTANT: If hands are not exactly at 12 o'clock, they have to be readjusted.
Diagram shows "~4 secs." indicating the duration the game result is displayed.
SCUBA FUNCTION: ELAPSED TIME
Diagrams show the watch face with an adjustment ring. One shows "SET" mode where the marker on the ring is aligned with the minute hand. The other shows "READ" mode, indicating elapsed time.
Using the Adjustment Ring:
- For setting the start time and duration of an activity, line up the marker on the adjustment ring with the minute hand.
- Timing starts at the time indicated by the marker.
- The elapsed time is indicated by the minute hand pointing the number on the adjustment ring.
WARNING NOTE:
IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.
CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.
