Front Seat Cover Installation
Step 1: Slide the seat cover over the front seat. For side airbag stitching, pull with caution. Unzipper the side for armrest(s). Push the CHUCK [fastener] through the seat gap.
Step 2: Slide the bottom cover over the bottom seat. Connect the BUCKLE [fasteners] together to fix the cover. Insert the HOOKS [fasteners] into the hole or iron wire underneath.
Step 3: Slide the headrest cover and secure it to hold the right position.
Back Cover Installation (For Full Set Product Option)
Step 1: Remove the headrest, put the seat cover over the seat, and smooth it to fit.
Step 2: Unzipper the upper side of each seat cover. Install the headrest to hold the seat cover. Adjust the middle cover to different sizes. Insert the CHUCK [fastener] into the seat gap.
Step 3: Put the bottom cover over the bottom seat. Insert the CHUCK [fastener] into the seat gap.
Step 4: Adjust the middle cover to different sizes. Insert the HOOKS [fasteners] into the hole or iron wire underneath.
Step 5: Adjust the safety belt to ensure safe driving.