SHARP PN-ZR01 Remote Control Set Operation Manual

Applicable Models LCD MONITOR (as of October 2012): PN-A601 / PN-V600 / PN-V601 / PN-V602

Note: Available models vary by region.

Thank you for purchasing a SHARP product. Before use, please read this operation manual carefully. In particular, carefully read the section "Ensuring Correct and Safe Operation." After reading the instructions, keep them in an accessible place. Information on using the product is provided in the LCD Monitor Operation Manual.

Recommendations

This product has undergone strict quality control and other checks; however, in case of malfunction or defect, please contact your SHARP dealer or the nearest customer service center.

Please understand that SHARP CORPORATION is not liable for errors made by the customer or a third party during operation, or for any other malfunctions or damage to this product that occur during its operation, except where such liability is imposed by law.

Product specifications and accessories are subject to change without prior notice.

Manufacturer and Importer Information

Country of Origin: Made in China

Manufacturer: SHARP Corporation

Registered Address of Manufacturer: 22-22 Nagaike-cho, Abeno-ku, Osaka 545-8522, Japan

Importer: Sharp Electronics Russia LLC

Address: Russia, 119017, Moscow, Bolshaya Ordynka St., 40/4

Phone: +7-495-411-87-77

In accordance with Article 5 of the Russian Federation Law "On Protection of Consumer Rights", as well as Government Decree of the Russian Federation No. 720 of June 16, 1997, the service life of this model is set at 5 years from the date of manufacture, provided it is used strictly in accordance with the operation manual and applicable technical standards.

Important Safety Information

WARNING

This product complies with Class "A" standards. In a domestic environment, it may cause radio interference, in which case appropriate measures may be required.

Caution: ⚠️ Failure to follow instructions may result in serious injury or death.

Do not attempt to modify, disassemble, or repair this product. This may lead to fire, electric shock, or injury.
Use accessories only with the specified models. Available models vary by region.

Part Names and Descriptions

Remote Control

The remote control is a rectangular device with various buttons:

1. Signal Transmitter: The infrared emitter at the top of the remote.
2. POWER Button: For turning the device on or off.
3. MUTE Button: To mute or unmute the sound.
4. VOL +/-: Adjusts the volume up or down.
5. BRIGHT +/-: Adjusts the screen brightness up or down.
6. DISPLAY Button: Shows current display information.
7. MODE Button: Selects operating modes.
8. INPUT Button: Selects the input source.
9. MENU Button: Accesses the main menu.
10. BRIGHT +/-: Alternative buttons for adjusting brightness.
11. VOL +/-: Alternative buttons for adjusting volume.
12. SIZE Button: Adjusts the screen size or aspect ratio.

Infrared Signal Receiver Block

This block receives signals from the remote control and connects to the monitor.

1. Brightness Sensor: (Component related to ambient light sensing or IR reception.)
2. Sensor for Remote Control: The primary infrared receiver.
3. Connecting Cable: Cable to connect the receiver block to the monitor.
4. Mounting Bracket: Bracket for attaching the receiver block.

Additional Accessories

If any component is missing, please contact your dealer.

Remote Control: 1
Batteries for Remote Control (R-6 (AA size)): 2
Infrared Signal Receiver Block: 1
Mounting Bracket: 1
Mounting Screw (short): 1
Set Screw: 1
Mounting Screw (long): 1*
Operation Manual (this manual): 1

* Used if required for additional equipment.

	SHARP PN-KTRC3 Remote Control Kit Instruction Manual and Warranty Comprehensive guide and warranty information for the SHARP PN-KTRC3 Remote Control Kit, detailing installation, usage, and after-sales service for compatible SHARP displays.
	Especificaciones y Características del Monitor LCD Sharp PN-V601 de 60 pulgadas Especificaciones detalladas, características y compatibilidad de software para el monitor LCD profesional Sharp PN-V601 de 60 pulgadas, diseñado para señalización digital y aplicaciones de videowall.
	Sharp PN-V601 Monitor LED: Specifiche Tecniche e Soluzioni Digital Signage Scopri il monitor LED Sharp PN-V601 da 60 pollici, ideale per video wall e applicazioni di digital signage. Include specifiche tecniche dettagliate, opzioni di connettività e il software Sharp Digital Signage.
	Sharp External Control M and P Series Manual Comprehensive guide to Sharp's M and P Series LCD monitors external control via RS-232C and LAN, detailing commands, protocols, and integration procedures.
	Sharp PN-V601 Ultra-Slim Bezel 60-inch LCD Monitor for Video Walls Explore the Sharp PN-V601, a 60-inch LCD monitor designed for seamless multi-screen video wall displays. Featuring an ultra-slim bezel, Full-Array LED Backlight, and advanced digital signage software capabilities, it offers high image quality and 24/7 reliability for professional applications in retail, airports, and more.
	Sharp PN-V600/PN-V601 Ultra-Slim Bezel LED Displays for Video Walls Discover the Sharp PN-V600 and PN-V601 ultra-slim bezel 60-inch LED displays, engineered for creating virtually seamless multi-screen video walls. These professional-grade displays offer full-array LED backlighting, 24/7 reliability, and advanced features for high-impact digital signage.
	SHARP Large Format Display Operation Manual - PN-M652, PN-P656 and more Comprehensive operation manual for SHARP MultiSync® Large Format Displays, covering models PN-M652, PN-M552, PN-M502, PN-M432, PN-P656, PN-P556, PN-P506, PN-P436. Includes setup, operation, maintenance, and troubleshooting guides.
	SHARP LCD Monitor Operation Manual for S-Format Command Comprehensive operation manual for SHARP PN-M and PN-P series LCD monitors, detailing the use of S-Format commands for external control via RS-232C and LAN.