Quick Installation Guide

MW325R

300Mbps Enhanced Wireless N Router

1Connect the Hardware

Note: If your Internet connection is through an Ethernet cable from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable directly to the router's WAN port.

Diagram showing a modem connected to the router via an Ethernet cable, with the router connected to a computer and the internet.

1
Turn off the modem, and remove the backup battery if it has one.
2
Connect an Ethernet cable from the modem to the WAN port on your router.
3
Power on the modem. Wait about 2 minutes for it to restart.
4
Power on the router.
5
Verify that the hardware connection is correct by checking the following LEDs.
Diagram showing the router's LED indicators: Power (On), WAN (On/Flashing).

2Configure the Router

1. Connect your computer to the router (Wired or Wireless).

Wired Connection:

Diagram illustrating a wired connection from the computer's Ethernet port to one of the router's LAN ports.

Wireless Connection:

Connect wirelessly using the SSID (Network Name) printed on the product label at the bottom of the router.

Diagram showing the product label on the bottom of the router with fields for S/N, MAC, and SSID.

2. Configure the router using a web browser.

a. Access the login page:

Enter http://mwlogin.net in the address bar of the web browser. Create a login password when prompted.

Screenshot of the login password creation page.

b. Set up your internet connection:

Select your connection type and enter the corresponding parameters. If you are unsure of your connection type, click Auto Detect. PPPoE is used as an example.

Enter the username and password provided by your ISP.

Screenshot of the internet connection setup page, showing fields for Connection Type, Username, and Password.

c. Customize your wireless network:

Set your wireless network name (SSID) and password. It is recommended to use a strong password.

Screenshot of the wireless settings page, showing fields for SSID and Password.

d. Finish setup:

Click the "Finish" button to complete the setup. You can then enjoy the Internet!

Screenshot indicating the setup completion and the need to reconnect to the network.

LED Indicators

LED	Name	Status	Indication
?	Power	Off	Power is off.
		On	Power is on.
?	WAN	Off	The corresponding port is not connected.
		On	The corresponding port is connected.
		Flashing	The corresponding port is transmitting/receiving data.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login window does not appear?

A1. If the computer is set to a static IP address, change it to obtain an IP address automatically.
A2. Verify that http://mwlogin.net is correctly entered in the web browser.
A3. Use another web browser and try again.
A4. Reboot your router and try again.
A5. Disable the network adapter used currently and then enable it again.

Q2. What can I do if I cannot access the Internet?

A1. Check if the Internet is working properly by connecting a computer directly to the modem via Ethernet cable. If not, contact your Internet Service Provider.
A2. Open a web browser, enter http://mwlogin.net and try to set up again.
A3. Reboot your router and try again.
Note: For cable modem users, reboot the modem first. If the problem still exists, log in to the web management page, go to Advanced > Network > MAC Address Settings, select Use the current computer's MAC address (MAC Clone) and Save.

Q3. How do I restore the router to its factory default settings?

A1. With the router powered on, press and hold the RESET button on the rear panel of the router for at least 5 seconds until all the LEDs turn on temporarily.
A2. Log in to the web management page of the router, and go to Advanced > System Tools > Factory Default Restore, click Restore, then wait until the process completes.

Q4. What can I do if I forget my web management page password?

A. Restore the router to its factory default settings and then create a new password when prompted.

Q5. What can I do if I forget my wireless network password?

A1. By default, the wireless network has no password.
A2. If you have set a password for the network, log in to the router's web management page, go to Basic > Wireless to obtain or reset your password.

	MERCUSYS MW325R 300Mbps Enhanced Wireless N Router User Guide User guide for the MERCUSYS MW325R 300Mbps Enhanced Wireless N Router, covering product overview, appearance, setup, configuration, and troubleshooting.
	MERCUSYS MW325R 300Mbps Enhanced Wireless N Router User Guide User guide for the MERCUSYS MW325R 300Mbps Enhanced Wireless N Router, covering product overview, appearance, connection, basic and advanced configuration, and troubleshooting.
	MERCUSYS MW325R 300Mbps Enhanced Wireless N Router User Guide Comprehensive user guide for the MERCUSYS MW325R 300Mbps Enhanced Wireless N Router, covering setup, configuration, and advanced features.
	MERCUSYS MW325R 300Mbps Enhanced Wireless N Router User Guide User guide for the MERCUSYS MW325R 300Mbps Enhanced Wireless N Router, covering product overview, appearance, setup, configuration, and troubleshooting.
	MERCUSYS MW305R 300Mbps Wireless N Router User Guide User guide for the MERCUSYS MW305R 300Mbps Wireless N Router, covering product overview, appearance, connection instructions, basic and advanced configuration, and troubleshooting.
	MERCUSYS MW306R User Guide: Setup and Operation Comprehensive user guide for the MERCUSYS MW306R 300Mbps Multi-Mode Wireless N Router. Learn about product overview, setup, configuration, and troubleshooting.
	MERCUSYS MW302R 300Mbps Wireless N Router User Guide Comprehensive user guide for the MERCUSYS MW302R 300Mbps Multi-Mode Wireless N Router, covering setup, configuration, and features.
	MERCUSYS MW305R User Guide: Setup and Configuration Comprehensive user guide for the MERCUSYS MW305R 300Mbps Wireless N Router. Learn about product overview, setup, internet connection, router configuration, security settings, and troubleshooting.