V10 Motorcycle Helmet Headset Quick Start Guide

This guide provides essential information for setting up and operating your V10 motorcycle helmet headset.

Product Overview

The V10 is a motorcycle helmet communication system designed for riders, offering Bluetooth connectivity for music playback, hands-free calling, and voice assistant access.

Device Description: The V10 unit is a compact headset designed to be mounted on a motorcycle helmet. It features multiple control buttons and LED indicators for status updates.

[Diagram showing the V10 headset with labeled buttons and ports: Power/Play/Pause/Answer button, Volume Down/Previous Track button, AI Voice button, Volume Up/Next Track button, LED indicators, Charging Port, Speaker/Microphone Interface.]

Power Operations

Powering On

Press and hold the power button for 3 seconds.
A power-on tone will sound, and the LED indicator light will flash quickly.

Powering Off

Press and hold the power button for 3 seconds.
A shutdown tone will sound, and the LED indicator light will turn off.

Power Button Functions

Short press: Play/Pause music, Answer/End call.
Long press (when music is paused): Increase volume.
Long press (when music is playing): Decrease volume.

Bluetooth Pairing

Entering Pairing Mode

When the device is not connected to Bluetooth, the work indicator light flashes quickly, indicating it is in Bluetooth waiting pairing status.

Successful Pairing

Once successfully paired with a device, the work indicator light will flash slowly.

Music Controls

Play/Pause Music: Short press the power button.
Next Track: Short press the Volume Plus button.
Previous Track: Short press the Volume Down button.
Volume Adjustment: Long press the Volume Plus button to increase volume, or long press the Volume Down button to decrease volume while music is playing.

Phone Controls

Answering Calls

Manual Answering: Short press the power button during an incoming call.
Automatic Answering: The device will automatically answer calls after 10 seconds if this feature is enabled.
Toggle Answering Mode: Double-click the AI voice button to switch between manual and automatic call answering modes (when Bluetooth is not connected).

During a Call

End Call: Short press the power button.
Reject Call: Press and hold the power button for 2 seconds during an incoming call.

Outgoing Calls

Redial Last Number: Double-click the AI voice button.
Cancel Outgoing Call: Short press the AI voice button.

Voice Assistant

Activate the AI voice assistant by pressing the dedicated AI voice button.

Voice Broadcast Language

Toggle Language: Double-click the power button (when Bluetooth is disconnected) to switch between Chinese and English voice broadcasts.

Package Contents

V10 Host Unit * 1
Speaker Microphone * 1
Clip-on Base * 1
Velcro Installation Package * 1
Type-C Charging Cable * 1
Instruction Manual * 1

Charging

Connect the included Type-C charging cable to the charging port on the V10 unit.
The charging indicator light will be red while charging.
The charging indicator light turns off when the unit is fully charged.

Important Notes and Warnings

Important Notice

Before installing the headphones, please connect your phone according to the Quick Manual instructions to test the sound and volume. If there is a significant difference in sound effect and volume after installing it in the helmet, please adjust the position of the speaker inside the helmet.

Precautions

Do not expose the product to open flames to avoid explosion.
Do not disassemble the product to avoid damage to electronic components.
Avoid contact with sharp objects that could damage the product.
If the product is not used for a long time, store it in a dry place.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FC CE SRRC ROHS certifications are indicated on the product.

	V10 Motorcycle Bluetooth Headset Quick Start Guide Concise guide to operating the V10 motorcycle Bluetooth headset, covering power, music, calls, pairing, and charging. Learn how to use your V10 for safe and convenient communication on the road.
	V10 Bluetooth Intercom Quick Instruction Manual Learn how to operate your V10 Bluetooth intercom with this quick instruction manual. Includes details on phone features, music control, power management, pairing, and important safety notes for the Y10Host model.