Vintage Wood Desk Assembly Instructions
Assembly Diagram
A visual representation of the completed Vintage Wood Desk is provided, showing the arrangement of shelves and frame.
The desk features a stainless steel frame with multiple shelves, designed for stability and aesthetic appeal.
Parts List
-
Component 1: Shelf Board
Quantity: 2
A textual description of the shelf board, which is a flat, rectangular piece of wood intended to be placed on the frame.
-
Component 2: Stainless Steel Frame
Quantity: 1
A textual description of the stainless steel frame, which provides the structural support for the desk. It consists of vertical supports and horizontal beams to hold the shelves.
Hardware List
-
A: Hex Wrench
Quantity: 1
A small L-shaped tool used for tightening bolts.
-
B: M6x20 Screw
Quantity: 8
Threaded fasteners used to connect the shelf boards to the frame.
-
C: Spring Washer
Quantity: 8
A washer with a helical shape that provides a spring force to keep the screw tight.
-
D: Flat Washer
Quantity: 8
A flat, ring-shaped component placed under a screw or bolt to distribute the load.
-
E: Caster
Quantity: 4
Wheels that attach to the bottom of the frame, allowing the desk to be easily moved.
Assembly Steps
Step 1: Secure Shelf Boards to Stainless Steel Frame
Attach the shelf boards to the stainless steel frame using the provided hardware.
Hardware required: 8x Component B (Screws), 8x Component C (Spring Washers), 8x Component D (Flat Washers), 1x Component A (Hex Wrench).
A textual description of the process: Align the shelf boards with the pre-drilled holes on the stainless steel frame. Insert screws through the flat washers and spring washers, then into the holes. Tighten securely using the hex wrench.
Step 2: Attach Casters
Install the casters onto the bottom of the stainless steel frame.
Hardware required: 4x Component E (Casters).
A textual description of the process: Screw the casters into the designated mounting points at the base of the stainless steel frame until firmly attached.
