Instruction Manual for MAINFRAME models including: OF-BIN-22, S-BIN-22, S-BIN-32, S-BIN-42U, OF-BIN-32, OF-BIN-42U, OF-BIN-42U 2U Open Cabinet W6 Fan Unit, 2U Open Cabinet W6 Fan Unit, Open Cabinet W6 Fan Unit, Cabinet W6 Fan Unit, Fan Unit

   Manual OF-BIN,S-BIN Ver1 1

MAINFRAME 22U CLOSED CABINET W/STEEL MESH FRONT & REAR DOORS | Lin Haw International

MAINFRAME 42U CLOSED CABINET W/STEEL MESH FRONT & REAR DOORS | Lin Haw International

MAINFRAME 32U CLOSED CABINET W/STEEL MESH FRONT & REAR DOORS | Lin Haw International

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 7 Pages, 12.82MB

Document Document

MAINFRAME BIG IRON OPEN FRAME & CLOSED CABINET SERIES OF-BIN & S-BIN-22/32/42U

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
PACKING METHOD
PACKAGE 1
TOP COVER * 1
ACCESSORIES PACKAGE * 1
10-32 * 40 Sets
PACKAGE 2
DOOR FRAME * 2

FAN TRAY * 1
COVER PLATE * 3 BOTTOM PLATE * 1
with 5 pcs of pre-installed cover plates
VERTICAL RAIL * 4
HORIZONTAL BEAM
22/32U * 4 42U * 6

PACKAGE 3
(S-BIN ONLY)
REAR DOOR * 1
ACCESSORY BAG
Ground wire sets * 3 sets Door larch rubber gasket * 3 sets M4x8 self-tapping screw * 1 pc

FRONT DOOR * 1 - 1 -

SIDE DOOR * 2
The side door of the cabinet above 1 meter depth shall be packed separately

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
COMPONENT LIST
(S-BIN ONLY)

(S-BIN ONLY)

(S-BIN ONLY) (S-BIN ONLY)
- 2 -

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
INSTALLATION Use the M8x12 Round head inner hex screws and M8 Flange nuts to connect the frames, top cover and bottom plate. Use M4x8 Self-tapping screws to fix the fan tray to door frames.
- 3 -

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
INSTALLATION Use M4x8 Self-tapping screws to install the side door limit block to the frame. Use M4x8 Self-tapping screws to fix the cover plates to the top cover and bottom plate.
- 4 -

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
INSTALLATION Install the horizontal beams to the door frame with M6x12 Screws and M6 Cage nuts first. Then install the vertical rail to the horizontal beams with M6x12 Screws and M6 Cage nuts.
Note: The distance between the front and rear vertical supports can be adjusted according to your equipment installation depth. 48 sets of M6x12 screws and cage nuts for 42U, 32 sets for 22U/32U.
Install the castors to the four corners at bottom by using M6x12 Self-tapping screws. Install the M12xL90 Levelling feet to each corner as well. Note: You can install Levelling feet at STEP 1 if needed.
- 5 -

ASSEMBLY INSTRUCTIONS -- OF-BIN & S-BIN-22/32/42U
INSTALLATION *** Steps 5 through 6 are for S-BIN (Closed Cabinet) series models ONLY *** Install side panels, adjust the diagonal dimension of cabinets.
Please note: Because the cabinets are disassembled, after assembly, please check and adjust the diagonal dimension, ensure the space between doors are acceptable, doors could open and close well.
Install front door and rear door. Place the door block on the hole of the bottom of frame, and set the front door/rear door. Fix the top of front/rear door by bolts and top of frame. Install the grounded parts between the front and rear doors and the floor panel.
- 6 -