BSD29 Wi-Fi Smart Plug
User Manual V1.0
This document provides instructions for the BSD29 Wi-Fi Smart Plug, a device designed for smart home automation.
Product Description: A compact, white smart plug with a standard power plug on one side and a socket on the other. It features a side button for manual control and a Wi-Fi indicator light.
Specifications
| Model | BSD29 |
|---|---|
| Input | 100-250V~ 50/60Hz |
| Output | 100-250V~ 50/60Hz |
| Wi-Fi | IEEE 802.11 b/g/n, 2.4GHz |
| APP Operating Systems | Androids & iOS |
| Working Temperature | -20°C~60°C |
| Product size | 58x58x32.5mm |
Setup and Usage
Connecting to eWeLink App
Follow these steps to connect your smart plug using the eWeLink application.
Step 1: Download eWeLink APP
Download the eWeLink APP from your device's app store.
Scan the QR code provided to download the app.
Step 2: Connect to Wi-Fi and Bluetooth
Ensure your phone is connected to a 2.4GHz Wi-Fi network and that Bluetooth is enabled.
Step 3: Power On the Device
Connect the smart plug to a power outlet.
Upon initial power-on, the device enters pairing mode. The Wi-Fi LED indicator will flash in a pattern of two short flashes followed by one long flash.
Note: The device will exit pairing mode if not connected within 3 minutes. To re-enter pairing mode, press and hold the pairing button for more than 5 seconds until the blue LED indicator blinks two short and one long.
Step 4: Add Device in the eWeLink App
Follow the on-screen prompts within the eWeLink app to add your device:
- Open the eWeLink app and tap the "+" icon to add a new device.
- Select "Add Device".
- The app will scan for nearby devices.
- Select the detected device (e.g., "ck_1001ed526f").
- Tap "Next" to proceed with the connection.
- Confirm the addition and tap "Next" to complete the setup.
Notes:
- The name of the scanned device may vary; please refer to the actual display.
- Wi-Fi information shown in this manual is for illustrative purposes and may not reflect your actual Wi-Fi network configuration.
Safety and Compliance Information
SAR Warning
Under normal use conditions, this equipment should be kept at a separation distance of at least 20 cm between the antenna and the user's body.
WEEE Disposal and Recycling Information
All products bearing the [WEEE symbol] are waste electrical and electronic equipment (WEEE) and should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling, appointed by the government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact your installer or local authorities for more information on collection points and their terms and conditions.
Compliance Marks: CE, UK CA, RoHS
Made in China
