Axial SCX10 III Base Camp Instruction Manual

Instruction Manual for Axial models including: SCX10 III Base Camp, SCX10, III Base Camp, SCX10 Base Camp
SCX10 III Base Camp Instruction Manual – English

1/10 SCX10 III Base Camp 4WD Rock Crawler Brushed RTR Grey - RC Car World (Hobby Shop Tracks)
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG ...

4 giu 2022 — Spray the bearings, drive train, fasteners and other metal parts with a water-displacing light oil. Do not spray the motor. • Let the vehicle air dry before you ...
AXI03027 Manual EN

Axial SCX10 III Base Camp 4WD 1:10 Rock Crawler Brushed RTR, Blue, CHF 499.00
File Info : application/pdf, 24 Pages, 14.09MB
JavaScript is disabled. Open the PDF or Download.
AXI03027 Manual EN
AXI03027
INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D'UTILISATION MANUALE DI ISTRUZIONI

EN
NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or resources tab for this product.
MEANING OF SPECIAL LANGUAGE The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product: WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury OR create a high probability of superficial injury. CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury. NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or no possibility of injury.

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

Age Recommendation: Not for children under 14 years. This is not a toy.

SAFETY PRECAUTIONS AND WARNINGS

As the user of this product, you are solely responsible for operating in a manner that does not endanger yourself and others or result in damage to the product or property of others. This model is controlled by a radio signal subject to interference from many sources outside your control. This interference can cause momentary loss of control, so it is advisable to always keep a safe distance in all directions around your model as this margin will help avoid collisions or injury.

· Never operate your model with low transmitter batteries. · Always operate your model in open spaces away from full-size
vehicles, traffic and people. · Never operate the model in the street or in populated areas for any
reason. · Carefully follow the directions and warnings for this and any optional
support equipment (chargers, rechargeable battery packs, etc.) you use. · Keep all chemicals, small parts and anything electrical out of the
reach of children. · Never lick or place any portion of the model in your mouth as it could
cause serious injury or even death. · Exercise caution when using tools and sharp instruments.

· Take care during maintenance as some parts may have sharp edges. · Immediately after using your model, do NOT touch equipment
such as the motor, electronic speed control and battery, because they generate high temperatures. You may burn yourself seriously touching them. · Do not put fingers or any objects inside rotating and moving parts, as this may cause damage or serious injury. · Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning your transmitter off. · Keep the wheels of the model off the ground when checking the operation of the radio equipment.

WARNING AGAINST COUNTERFEIT PRODUCTS: Always purchase from a Horizon Hobby, LLC authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, LLC disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM® or Spektrum technology.

2

EN

TABLE OF CONTENTS
Water-Resistant Vehicle With Waterproof Electronics............................. 3 Box Contents..................................................................................................... 4 Required Equipment ........................................................................................ 4 Recommended Tools ....................................................................................... 4 Getting Started Checklist................................................................................ 5 Vehicle Parts..................................................................................................... 5 Charge the Vehicle Battery ............................................................................ 6 Install the Transmitter Batteries.................................................................... 6 Transmitter Functions...................................................................................... 6 SPMSR315 Dual Pprotocol Receiver............................................................ 7 Adjusting the Vehicle battery tray................................................................. 7 Install the Vehicle Battery .............................................................................. 8 Binding............................................................................................................... 8 Range-checking the Radio System............................................................... 9

Vehicle Maintenance ...................................................................................... 9 Firma 40A Brushed ESC ................................................................................ 10 Gear Ratios...................................................................................................... 10 Troubleshooting.............................................................................................. 11 Limited Warranty............................................................................................ 12 Warranty and Service Contact Information .............................................. 12 FCC Information.............................................................................................. 13 IC Information ................................................................................................. 13 Compliance Information for the European Union..................................... 13 Parts Lists........................................................................................................ 56 Recommended Parts ..................................................................................... 58 Optional Parts ................................................................................................. 58 Electronics ...................................................................................................... 58 Notes................................................................................................................ 59

WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS

Your new Horizon Hobby vehicle has been designed and built with a combination of waterproof and water-resistant components to allow you to operate the product in many "wet conditions," including puddles, creeks, wet grass, snow and even rain.
While the entire vehicle is highly water-resistant, it is not completely waterproof and your vehicle should NOT be treated like a submarine. The various electronic components used in the vehicle, such as the Electronic Speed Control (ESC), servo(s) and receiver are waterproof, however, most of the mechanical components are water-resistant and should not be submerged.
Metal parts, including the bearings, hinge pins, screws and nuts, as well as the contacts in the electrical cables, will be susceptible to corrosion if additional maintenance is not performed after running in wet conditions. To maximize the long-term performance of your vehicle and to keep the warranty intact, the procedures described in the "Wet Conditions Maintenance" section below must be performed regularly if you choose to run in wet conditions. If you are not willing to perform the additional care and maintenance required, then you should not operate the vehicle in those conditions.
CAUTION: Failure to exercise caution while using this product and complying with the following precautions could result in product malfunction and/or void the warranty.
GENERAL PRECAUTIONS
· Read through the wet conditions maintenance procedures and make sure that you have all the tools you will need to properly maintain your vehicle.
· Not all batteries can be used in wet conditions. Consult the battery manufacturer before use. Caution should be taken when using Li-Po batteries in wet conditions.
· Most transmitters are not water-resistant. Consult your transmitter's manual or the manufacturer before operation.
· Never operate your transmitter or vehicle where lightning may be present. · Do not operate your vehicle where it could come in contact with salt
water (ocean water or water on salt-covered roads), contaminated or polluted water. Salt water is very conductive and highly corrosive, so use caution.

· Even minimal water contact can reduce the life of your motor if it has not been certified as water-resistant or waterproof. If the motor becomes excessively wet, apply very light throttle until the water is mostly removed from the motor. Running a wet motor at high speeds may rapidly damage the motor.
· Driving in wet conditions can reduce the life of the motor. The additional resistance of operating in water causes excess strain. Alter the gear ratio by using a smaller pinion or larger spur gear. This will increase torque (and motor life) when running in mud, deeper puddles, or any wet conditions that will increase the load on the motor for an extended period of time.
WET CONDITIONS MAINTENANCE
· Drain any water that has collected in the tires by spinning them at high speed. With the body removed, place the vehicle upside down and pull full throttle for a few short bursts until the water has been removed.
CAUTION: Always keep hands, fingers, tools and any loose or hanging objects away from rotating parts when performing the above drying technique.
· Remove the battery pack(s) and dry the contacts. If you have an air compressor or a can of compressed air, blow out any water that may be inside the recessed connector housing.
· Remove the tires/wheels from the vehicle and gently rinse the mud and dirt off with a garden hose. Avoid rinsing the bearings and transmission.
NOTICE: Never use a pressure washer to clean your vehicle.
· Use an air compressor or a can of compressed air to dry the vehicle and help remove any water that may have gotten into small crevices or corners.
· Spray the bearings, drive train, fasteners and other metal parts with a water-displacing light oil. Do not spray the motor.
· Let the vehicle air dry before you store it. Water (and oil) may continue to drip for a few hours.
· Increase the frequency of disassembly, inspection and lubrication of the following: - Front and rear axle hub assembly bearings. - All transmission cases, gears and differentials. - Motor--clean with an aerosol motor cleaner and re-oil the bushings with lightweight motor oil.

3

EN
BOX CONTENTS
· SpektrumTM SLT3 3 Channel 2.4GHz Transmitter (SPMRSLT300) · SCX10TM III Base CampTM RTR
- 35T Electric Motor (DYNS1216) - 40A Smart Brushed ESC (SPMXSE1040) - Spektrum DSMR® 3 Channel Receiver (SPMSR315) - Water Proof Metal Gear Surface Servo, 23T (SPMS614) - (4) AA Alkaline batteries

· Parts Bag

· Cross Wrench

· (4) AA Alkaline batteries

REQUIRED EQUIPMENT
· 2-3S Standard or "Shorty" LiPo Battery
OR
· 5-9 Cell NiMH/NiCd battery (IC3® Connector Required)

· Battery charger compatible with the chosen vehicle battery type

RECOMMENDED TOOLS

· Hex Drivers (1.5, 2.0, 2.5mm)

· Hobby · Side Cutter Knife

· Curved · Long-nose Plier Scissors

4

GETTING STARTED CHECKLIST
Read the manual Familiarize yourself with the vehicle and its components Check all screws, especially the driveshaft setscrews, for tightness from the factory Charge the vehicle battery Install 4 AA batteries in the transmitter
VEHICLE PARTS

EN
Power on the transmitter Install the vehicle battery in the vehicle Check for proper function of the throttle and steering Range check the radio system Drive the vehicle, challenge yourself and have FUN! Perform any necessary vehicle maintenance

Steering Knuckle Steering Servo

Front Body Mount

"Shorty" Battery Tray Transmission
Driveshaft Upper 4-link Bar Standard Battery Tray
Differential (inside axle housing)

Receiver ESC Lower 4-link Bar
Shock Absorber Rear Body Mount

5

EN
CHARGE THE VEHICLE BATTERY
Follow the manufacturer's directions for your charger to properly charge the vehicle battery.
CAUTION: Only use chargers designed to charge the chosen battery type. Using an incorrect charger or incorrect charger settings could cause the battery to catch fire or explode.

INSTALL THE TRANSMITTER BATTERIES
This transmitter requires 4 AA batteries. 1. Remove the battery cover from the transmitter. 2. Install the batteries as shown. 3. Install the battery cover.
CAUTION: NEVER remove the transmitter batteries while the model is powered on. Loss of model control, damage, or injury may occur. CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to national regulations.

TRANSMITTER FUNCTIONS

SPECIFICATIONS

A

Power Supply: 4 AA Batteries

Operating Frequency: 2.4GHz

B

Transmit Power: <100mw

C

Control Protocol: SLT

Control: Proportional Steering and Throttle/Brake with Trim Knobs, Third Channel with 3 Position Momentary Switch

Auxiliary Functions: 3 Position Throttle Limit Switch, Steering Rate

D

Knob to Change Steering Travel on-the-fly, Programmable Servo Travel

for Steering and Throttle/Brake

E

A. Throttle Trim

F

Adjusts the throttle neutral point

B. Steering Trim

G

Adjusts the steering center point. Normally, the steering trim is adjusted until the vehicle tracks straight.

C. LED

· Solid red lights: Indicates the power is ON and adequate battery

power

· Flashing red lights: Indicates the battery voltage is critically low.

Replace batteries

H

D. Steering Wheel

E. Throttle/Brake

I

F. Steering Rate

On-The-Fly knob for travel adjustment on the steering

J

G. Channel 3

3 position momentary switch, middle position is neutral

K

For programming press up for A button, press down for B button

H. Throttle Limit

Limits throttle output to 50/75/100%

Select 50% or 75% for less experienced drivers or when you are driving the vehicle in a small area.

I. Throttle (TH) Servo Reversing

Move the switch to reverse the throttle channel

J. Steering (ST) Servo Reversing Move the switch to reverse the steering channel

K. Power Button

6

EN

SPMSR315 DUAL PROTOCOL RECEIVER

SPECIFICATIONS

Type

Dual Protocol 3 Ch Receiver (SLT/DSMR)

Dimensions (L × W × H)

32.5 x 21.5 x 12.4mm

Antenna Length

90mm

Channels

3

Weight

6g

Band

2.4GHz

Voltage Range

3.59.6V

Bind Type

Button

ADJUSTING THE VEHICLE BATTERY TRAY
The battery trays may be adjusted to fit a wide range of battery sizes. The rear battery tray is shown in the illustration. The side battery tray is adjustable in the same manner.
To adjust the battery tray:
1. Loosen the four flathead screws shown in the illustration. 2. Slide the ends of the battery tray in or out to fit the desired battery. 3. Tighten the four flathead screws. Do not over-tighten the screws.

BATT STR THR AUX 1

7

EN
INSTALL THE VEHICLE BATTERY
The following steps show the installation of a standard size battery in the rear battery tray of the vehicle. If you wish to use a "shorty" style battery, it should be installed in the side battery tray location.
Power
1. Power on the transmitter.
2. Remove the four body clips from the body. 3. Lift the body from the chassis. 4. Place the battery in the battery tray. The battery tray length may be
adjusted to fit the battery as described in the previous section.

5. Secure the battery to the tray with the hook and loop strap. 6. Connect the battery to the ESC. 7. Re-install the body and four body clips to the chassis.
NOTICE: Always disconnect the battery from the ESC before powering off the transmitter. Loss of vehicle control may result.

BINDING
Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identifier) code of a single specific transmitter. Failsafe: Hold the steering wheel and throttle trigger in the desired failsafe positions during binding
1. Press and hold the bind button. 2. Power ON the receiver. The orange LED will begin to flash. 3. Set the trims and control positions at the desired failsafe settings. 4. Power ON the SLT3 transmitter. 5. When the transmitter's orange LED remains lit, it is connected to
SR315 receiver. You must rebind when: · Different failsafe positions are desired (e.g., when throttle or steering
reversing has changed). · Binding the receiver to a different transmitter.
8

Bind Button

EN
RANGE-CHECKING THE RADIO SYSTEM
The radio system should be checked before operating the vehicle to ensure proper operation and adequate range. 1. Turn on the transmitter. 2. Connect the battery in the vehicle. 3. Have a friend hold the vehicle while keeping hands and loose clothing away from moving parts. 4. Walk away until you are at the maximum planned operating distance from the vehicle. 5. Turn the steering wheel side to side and operate the throttle, both forward and reverse, checking for any erratic behavior. 6. If any erratic behavior is exhibited, DO NOT operate the vehicle. Call customer service for assistance.
VEHICLE MAINTENANCE
Just like a full size car or truck your RC vehicle must undergo periodic maintenance in order to ensure peak performance. Preventative maintenance will also help avoid needless breakages which could result in costly repairs. Below are some suggestions to properly maintain your vehicle.

Replace any noticeable bent or
broken parts

Check for wear on the ball joints in the steering and suspension links
(replace if necessary)

Check driveshaft set screws and
apply thread locking compound if
necessary

Inspect shock

Check for any loose

absorbers for smooth connections or frayed

dampened operation

wiring

Check the wheel nuts for tightness

Ensure the wheel beads are still firmly bonded around the entire circumference
of the rim

Keep the chassis free of dirt and debris

Check for loose screws on the chassis, especially the knuckle, C-hub and axle lockout
screws

Check the driveline for smooth, bind free
operation

If applicable, check the slipper clutch for
proper operation

Check the receiver antenna for damage

Check the steering operation for any
binding
9

Inspect the spur and pinion gears for
damage

Replace the transmitter batteries when indicated by the transmitter, as
described in the Transmitter Functions
section

EN
FIRMA 40A BRUSHED ESC
Battery Red
Black

To Receiver

ESC

Throttle Channel

Motor

Mode

Forward/Brake/ Reverse (F/B/R)

50% Drag 100% Drag Brake

Brake

(default)

Battery (BATT)

Li-Po Ni-MH (default)

SPECIFICATIONS

Type Constant/Peak
Resistance
Function

Brushed 40A/180A 0.002 Ohms Forward/Brake/Reverse, Forward/Brake, Forward/Reverse (Crawler Mode)

Vehicle Type 1/10 on-road and off-road; 1/10 rock crawler

Operation

Proportional forward, proportional reverse with braking delay, Crawler Mode

Battery Type/Input Voltage

23 cell Li-Po/Li-Fe; 59 cell Ni-MH/Ni-Cd

Motor Type BEC Output Dimensions
Weight Battery Connector

2S Li-Po down to 12T; 3S Li-Po down to 18T 6V/3A 46.5mm x 34mm x 28.5mm (1.8 x 1.3 x 1.1 in) 70g (2.5 oz) IC3TM connector

SETUP
Throttle calibration should not be needed out of the box. However, in order to make the throttle range of different transmitters, the calibration of the ESC is necessary: · Mount the ESC in an area that is well ventilated and isolated from
vibration and shock. · Connect the ESC motor wires to the motor red-to-red and black-to-
black. · Plug the receiver into the throttle channel of the receiver. · Before plugging the battery into the ESC, make sure your transmitter
is on and the throttle trim is set to zero. · Connect the battery to the ESC. The vehicle will be powered on
when the battery is connected.
CAUTION: Keep all body parts and loose clothing away from any moving parts while the battery is connected to the ESC.
CAUTION: Always connect the ESC only to a proper power source that has the correct voltage and polarity. Incorrect voltages or reversed polarity will damage the ESC. Damage to the ESC caused by improper voltage or polarity is not covered under warranty.
· Test forward and reverse control using the transmitter.

SOUND INDICATOR

OPERATION Ni-MH/Ni-CD Battery
2S Li-Po Battery 3S Li-Po Battery
ESC Ready

SOUND 1 Short Beep 2 Short Beeps 3 Short Beeps 1 Long Beep

TO CALIBRATE THE ESC:
· Power the transmitter on and set the throttle control to neutral. · Connect the battery to the ESC and wait 3 seconds to let the ESC
initiate a self-test and automatic throttle calibration. · The ESC is ready to run when a long beep sound is emitted from the motor. · Always disconnect the battery when the vehicle is not in use.
IMPORTANT: The LiPo cut-off is set to "ON" and the drag brake is set to 100% from the factory.

GEAR RATIOS

SPUR/PINION GEAR RATIO CHART - LCX TRANSMISSION

12

13

14 (stock)

15

16

17

18

Portal Axles (stock)

55.1

50.9

47.2

44.1

41.3

38.9

36.7

Standard Axles (optional)

30.5

28.1

26.1

24.4

22.9

21.5

20.3

10

EN

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

Your transmitter and receiver are too close together

Move transmitter 8 to 12 feet away from receiver

You are near metal objects

Move to an area with less metal

The system will not connect

The receiver is bound to a different model memory

Make sure the correct model memory is active in your transmitter

The receiver goes into failsafe a short distance away from the transmitter

Your transmitter was placed into bind mode and is no longer bound to your receiver
Check for damage on the receiver antenna

Rebind your transmitter and receiver, and then re-calibrate
Make sure your receiver antenna is protected and located as high as practical Replace the receiver or contact Horizon Product Support

The receiver stops responding during operation
Vehicle does not move

Low receiver battery voltage. If the battery voltage is low, it may drop below 3.5V momentarily, causing the receiver to brown-out, then reconnect

Charge the receiver or vehicle battery. Spektrum receivers require at least 3.5V to operate

Loose or damaged wires or connectors Check the wires and connection between the battery and

between battery and receiver

receiver. Repair or replace wires and/or connectors

Batteries are not installed properly in the transmitter

Ensure the transmitter batteries are properly installed

Weak or no battery in the vehicle

Install a freshly charged vehicle battery

Damaged motor

Replace the motor

Frayed or broken wiring

Replace any damaged wiring

ESC is shut down by heat protection circuit Allow the ESC to cool down completely

Improper antenna placement

Ensure the transmitter antenna is not blocked and the receiver antenna is located properly

Loss of vehicle control

Weak or no batteries in the transmitter Install a freshly charged vehicle battery and new

or vehicle

transmitter batteries

Neutral or trim position is incorrect Adjust the steering trim

Receiver and/or battery not connected properly

Check all receiver and battery connections

Steering and/or throttle function is reversed
ESC ON - No motor function, audible tone or LED

Servo travel is reversed at the transmitter Motor wires are not connected properly Battery/connection issue Damaged ESC Damaged motor

Set the transmitter servo reversing switch to the correct position Check all motor wires for correct polarity and secure connection Recharge/replace battery. Secure all connections Repair/replace ESC Repair/replace

Motor- Stops and LED blinks

Low voltage protection Overheat protection

When the ESC LED blinks, recharge/replace battery
When the LED blinks, let motor/ESC cool, change set up or gearing to avoid overheating

Motor- Accelerates irregularly

Battery issue Incorrect gearing Worn or damaged motor

Repair damaged wiring/replace battery Adjust/replace gearing Repair/replace motor

Motor- Does not turn continuously in response to throttle
Motor- Slows but will not stop

ESC/motor damaged Incorrect transmitter/ESC calibration

Damaged motor Steering servo- Operates; motor does not

run

Incorrect transmitter/ESC calibration

Low battery voltage

Repair/replace wiring or motor/ESC
Adjust throttle travel/other throttle settings on the transmitter/ESC. Repeat the ESC Calibration Procedure Test the motor apart from the vehicle system, repair/replace motor as needed Adjust throttle travel/other throttle settings on the transmitter/ESC. Repeat the ESC Calibration Procedure Recharge/replace

Steering/motor- not functioning

Wrong model memory selected on transmitter

Select correct model settings on your transmitter, refer to transmitter and/or receiver manual

Vehicle- Does not operate at full speed

Receiver not bound to transmitter Battery issue Incorrect transmitter/ESC calibration

Bind transmitter to receiver, refer to transmitter and/or receiver manual
Recharge/replace
Adjust throttle travel/other throttle settings on the transmitter/ESC. Repeat the ESC Calibration Procedure

11

EN

LIMITED WARRANTY
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship for a period of 2 years from the date of purchase. What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic damage, (ii) damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or due to improper use, installation, operation or maintenance, (iii) modification of or to any part of the Product, (iv) attempted service by anyone other than a Horizon Hobby authorized service center, (v) Product not purchased from an authorized Horizon dealer, or (vi) Product not compliant with applicable technical regulations or (vii) use that violates any applicable laws, rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE PURCHASER'S INTENDED USE. Purchaser's Remedy
Horizon's sole obligation and purchaser's sole and exclusive remedy shall be that Horizon will, at its option, either (i) service, or (ii) replace, any Product determined by Horizon to be defective. Horizon reserves the right to inspect any and all Product(s) involved in a warranty claim. Service or replacement decisions are at the sole discretion of Horizon. Proof of purchase is required for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability. If you as the purchaser or user are not prepared to accept the liability associated with the use of the Product, purchaser is advised to return the Product immediately in new and unused condition to the place of purchase. Law
These terms are governed by Illinois law (without regard to conflict of law principals). This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Horizon reserves the right to change or modify this warranty at any time without notice. WARRANTY SERVICES Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support or service. Once assembly, setup or use of the Product has been started, you must contact your local distributor or Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions

or assistance, please visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free telephone number referenced in the Warranty and Service Contact Information section to speak with a Product Support representative. Inspection or Services
If this Product needs to be inspected or serviced and is compliant in the country you live and use the Product in, please use the Horizon Online Service Request submission process found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) number. Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. An Online Service Request is available at http://www.horizonhobby.com/content/service-center_renderservice-center. If you do not have internet access, please contact Horizon Product Support to obtain a RMA number along with instructions for submitting your product for service. When calling Horizon, you will be asked to provide your complete name, street address, email address and phone number where you can be reached during business hours. When sending product into Horizon, please include your RMA number, a list of the included items, and a brief summary of the problem. A copy of your original sales receipt must be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue with a Li-Po battery, please contact the appropriate Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be serviced or replaced free of charge. Service or replacement decisions are at the sole discretion of Horizon. Non-Warranty Service
Should your service not be covered by warranty, service will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for service you are agreeing to payment of the service without notification. Service estimates are available upon request. You must include this request with your item submitted for service. Non-warranty service estimates will be billed a minimum of 1/2 hour of labor. In addition you will be billed for return freight. Horizon accepts money orders and cashier's checks, as well as Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for service, you are agreeing to Horizon's Terms and Conditions found on our website http://www. horizonhobby.com/content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the country of use and ownership. If received, a non-compliant Product will not be serviced. Further, the sender will be responsible for arranging return shipment of the un-serviced Product, through a carrier of the sender's choice and at the sender's expense. Horizon will hold non-compliant Product for a period of 60 days from notification, after which it will be discarded.
10/15

WARRANTY AND SERVICE CONTACT INFORMATION

COUNTRY OF PURCHASE HORIZON HOBBY

CONTACT INFORMATION

ADDRESS

Horizon Service Center (Repairs and Repair Requests)

servicecenter.horizonhobby.com/RequestForm/

United States of America

Horizon Product Support

productsupport@horizonhobby.com

(Product Technical Assistance) 877-504-0233

2904 Research Rd Champaign, IL 61822

Sales

websales@horizonhobby.com 800-338-4639

European Union

Horizon Technischer Service service@horizonhobby.eu Sales: Horizon Hobby GmbH +49 (0) 4121 2655 100

Hanskampring 9 D 22885 Barsbüttel, Germany

12

EN

FCC INFORMATION
FCC ID: BRWSPMSLT300 FCC ID: BRWSRIRVINGV1
SUPPLIER'S DECLARATION OF CONFORMITY Axial SCX10 III Base Camp RTR (AXI03027)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Horizon Hobby, LLC 2904 Research Rd., Champaign, IL 61822 Email: compliance@horizonhobby.com Web: HorizonHobby.com

IC INFORMATION
CAN ICES-3 (B)/NMB-3(B) IC: 6157A-SPMSLT300 IC: 6157A-SRIRVINGV1 This device contains license-exempt transmitter(s)/receivers(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following 2 conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference
that may cause undesired operation of the device.

COMPLIANCE INFORMATION FOR THE EUROPEAN UNION

EU COMPLIANCE STATEMENT: Axial SCX10 III Base Camp RTR (AXI03027)
Hereby, Horizon Hobby, LLC declares that the device is in compliance with the following: EU Radio Equipment Directive 2014/53/ EU; RoHS 2 Directive 2011/65/EU; RoHS 3 Directive - Amending 2011/65/ EU Annex II 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.horizonhobby.com/content/ support-render-compliance.

EU Manufacturer of Record: Horizon Hobby, LLC 2904 Research Road Champaign, IL 61822 USA
EU Importer of Record: Horizon Hobby, GmbH Hanskampring 9 22885 Barsbüttel Germany

Wireless Frequency Range and Wireless Output Power
Transmitter 2403.0 - 2480.0 MHz 16.3 dBm
Receiver 2404-2476 MHz -1.33dBm

WEEE NOTICE:
This appliance is labeled in accordance with European Directive 2012/19/EU concerning waste of electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

13

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE
FRONT AXLE VORDERACHSE ESSIEU AVANT ASSALE ANTERIORE

AXI235109 AXI234004
AXI234010

AXA120 AXI234006

AXI234035

AXI234006 AXI234004 AXI234004

AXI234004

AXI234004

AXI235109

AXI234006

AXI234035

AXI234035 AXI234004

AXI234006 AXI232017
AX31028
AX31148

AXI234008

AXA1230

AX31403

AXI234004

AXI232006

AXI234006

AXI234003

AXA120

AXI232017 AXA144

AXA1221 AX30165
AX31403

AXI232027 AXA1221 AXA1221

AX31028 AXI234004 AXA0286
AXI232017 AXA1221

AX31148

AXA144 AXI234003

AXI235014

AXI232008

AXI232018

AXI237009 AX31066

AXI234004

AXA120

AXI232026

AX34106

AXI232003

AXI232002 AX31047

AXI232002

AX31406

AXI235016 AXA1221

AXI234004

AX31043

AXI232027

AXA1230

AXI234006

AXI234006

AXI234035 AXI234004

AXI237008

AXA1221

AXA1221

AXI237009 AXI232018

AXI232006

AX30165 AXI232008
AX31043
AXI235014

AXI235110

AXI234006 AXI234004

50

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE
REAR AXLE HINTERACHSE ESSIEU ARRIÈRE ASSALE POSTERIORE
AXI232007

AXI232028

AX31406

AXI232026

AXI232008 AX31065
AXI235014

AXA1221

AX31074

AXI232002

AXI232023

AXA1221

AXA1221

AXI232003

AX31006 AX31406

AXI232018 AXI237009 AXI235016
AXI234003

AX31028 AX31148

AXA0286

AXI234004 AXA144

AXI232017

AXI232017 AXA144

AXI234003

AXA0286
AX31148 AX31028 AXI232017

AXA120 AXI234004
AXI234006

AXI234004

AXI232028

AXA1221 AX31065 AXA1221

AXI232008

AXI237009 AXI232018 AXI232023
AXI235014

AXI232007

AXI234035 AXI234035

AXI234006

AXI234004 AXA120

AXI234004

AXI234006

AXI234004

AXI234035

AXI234004 AXI234006

AXI234004

AXI234006

AXI234035

AXA120

51

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE

TRANSMISSION GETRIEBE TRANSMISSION TRASMISSIONE

AXA291

AX30725

DYNS1216

AXI232066

AXA144

AXI232064

AXA0109

AXI232065 AXI232067

AXI232067

AX31185

AXI232069

AXA1218

AXA146

AX31250 AXI232064

AXI232068 AXA1218
AXI236136
AXA1213 AXI232069

AXA1213 AXI232068

AXA1218
AXA0286 AX31148

AXI232070 AXA1225
AXI232017

AXA1213 AXA1225

AXI232064

AXI232017

AXA0013 AXI232068

AXA144

AXA0286

AX31028

AXI232017

AX31148

AXI232017

AXI232017

AXA144

AX31028 AXA115 AXA114

AXA114

AXI232017
AXI234004 AXA118

AXI234004 AXA116

AXA114

AXI231047 AXA115

AXA118

AXI231047

AXI231047

AXI234004

AXI234004 AX31185

AXA118

AXA116

52

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE

CHASSIS KAROSSERIE CHÂSSIS TELAIO

AXA144

AXA0286

AXI230048

AXI231008

AXA0286 AXI230048

AXI231021

AXA146 SPMXSE1040
SPMSR315 AXI231017
AXA146

AX31185

AXI231016

AXA144

AXA0286

AXI231021 AXA146
AXI231049 AXA114

AXI231017

AXI231015

AXI231049

AXI231048 AXA114
AXI231017

AXA0109 AXI231012
AX31185 AXI231048
AXI231016

SPMS614

AXI231015

AXA114

AXA146

AXA115

AXI231016

AXI231017

AXA146 AXA144
AXI231046

AXA144 AXI231008

AXA146 AX31185

AXI235167 AXI231049
AXI235167

53

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE

BODY ASSEMBLY KAROSSERIEMONTAGE ENSEMBLE DE CARROSSERIE GRUPPO CARROZZERIA

AXA1059

AXI230046 AXA1059

AXA1059

AXI230047

AXI235014

AXA0286

AXI235014 AX31066

AX31066

AXI230047 AXA0286

AXI235014

AXI43014

AXI43015

54

AXI03027

EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE

SHOCK ABSORBERS STOSSDÄMPFER AMORTISSEURS AMMORTIZZATORI

AXI234033 AXI233031
AX1392

AXI233032
AXI233003 AXI233031

AXI233033

AXA1201
AXI235099 AXI234004

AXI233032 AXI233031 AXI233015 AXI233031

55

PARTS LISTS // TEILELISTEN // LISTE DES PIÈCES // ELENCO COMPONENTI

Part # ARAC9759
AXI230046
AXI230047
AXI230048
AXI231008
AXI231009
AXI231010 AXI231011 AXI231012 AXI231015 AXI231016
AXI231017 AXI231018 AXI231021
AXI231047
AXI231048
AXI231049 AXI232002 AXI232003
AXI232017
AXI232018 AXI232024 AXI232025 AXI232033 AXI232059 AXI232060 AXI232061 AXI232062 AXI232064
AXI232065 AXI232066 AXI232067
AXI232068
AXI232069
AXI232070
AXI233003 AXI233009 AXI233031 AXI233032
AXI234003
AXI234004
AXI234006

Description AR722305 Flat Head Screw 3x5mm
Base Camp Body Set w/Mask, Clear
DO FR/RR Bumper Set: SCX10III Bt
Body Post Set: SCX10 III BC
BatteryTray Set/Strap: SCX10III
Upper Center Lnk Mnts: SCX10III
Cntr Trans Skid Plate: SCX10III Str Mnt Chassis Brace: SCX10III Servo Horn, Metal 23T: SCX10III Frame Rail Set: SCX10III Bmpr/Bdy Mnts Chs FR/RR:SCX10II
Shktwrs&Pnhrd Mnts Fr/RRSCX10II Receiver Box: SCX10III Upper Shk Twr Braces: SCX10III
Skd Plt &Upr Lnk Mnt:SCX10III B
Servo Mnt Brace FR: SCX10III BC
Side Plate&Rr Brace: SCX10III B 6-Bolt Differental Locker 6 Bolt Heavy Duty Gear Set
Wild Boar Driveshaft Set: UTB
12mm Hex Pin and Spacer (4): UTB AR45 Axl Hsng(Fr)SCX10III AR45 Axl Hsng (Rr)SCX10III InputMtlGears 27,20,34T:SCX10II AR45 C-Hub (L-R): SCX10 AR45 Knuckle (L-R): SCX10 III AR45 Unvrsl Axles (2): SCX10 II AR45 Strght Axles (2): SCX10 II Gear Cover & Trans Housing: LCX
Spur Gear 56T 32P: LCXU Motor Plate: LCXU Slipper Elimintr Hub&Plate: LCX
Transmission Metal Gear Set:LCX
Transmission Shaft Set: LCXU
Trans Center Output Shaft: LCXU
Shock O-Ring Set: UTB Spring 13x70mm 2.0 lbs/in Ylw(2 Shock Part Composite:SCX10III B Alum Shck Bdy11x39.5:SCX10III B
Pvt Ball,Stainless12.75mm(4):UTB
Susp Pvt Ball, Stainless 7.5mm
HD Rod Ends M4 20pcs: UTB

Beschreibung

Description

Descrizione

Sechskant-Flachkopfschraube,

Douille à six pans à tête plate

Vite a testa piana esagonale

M3 x 5mm

M3 x 5mm

M3 x 5mm

Base Camp Gehäuse Satz mit Maske, farblos

Ens carrosserie Base Camp a/c Set scocca Base Camp con

masque, transparent

maschera, trasparente

DO FR/RR Stoßstangensatz: SCX10III Jeu de pare-chocs AV/AR DO

Bt

SCX10III Bt

Set paraurti anteriore/posteriore: SCX10III Bt

Gehäusestangensatz: SCX10 III BC

Ens poteaux carrosserie : SCX10 III BC

Set supporti scocca: SCX10 III BC

Akkuhalterungsätze und Riemen

Ensembles de supports de batterie avec sangle

Fascette e set supporto batteria

Obere mittige Gestängehalterungen

Supports pour tringlerie centrale supérieure

Supporti braccetti centrali superiori

Mittiges Getriebe-Gleitbrett

Plaque de protection pour transmission centrale

Piastra proteggi trasmissione centrale

Lenkhalterung Karosseriestrebe Support de châssis de direction Sostegno telaio supporto sterzo

Servohorn, Metall 23T

Renvoi de commande de servo, métal 23T

Squadretta servo, Metallo 23T

Rahmenschienensatz

Ensemble de rails du cadre

Set guida telaio

Stoßstange/Gehäusehalterung Karosserie Front/Heck

Châssis avec supports de parechocs et de carrosserie AV/AR

Telaio supporti carrozzeria/ ammortizzatore FR/RR

Stoßdämpferbrücken und Panhard- Tours d'amortisseurs et supports Torre ammortizzatore e supporti

Halterungen Front/Heck

Panhard AV/AR

Panhard FR/RR

Empfängerbox

Boîtier de récepteur

Scatola ricevitore

Obere Stoßdämpferbrückenstreben

Supports de tours d'amortisseurs supérieures

Sostegni torre ammortizzatore superiori

Gleitbrett & Obere Verbindungshalterung:SCX10III B

Plq trans et sup tringlerie centr sup : SCX10III B

Sottoscocca & supporti bracci superiori: SCX10III B

Servohalterungsstrebe vorne: SCX10III BC

Support Servo FR : SCX10III BC

Bracci supporto servo ant: SCX10III BC

Seitenplatte & Strebe hinten: SCX10III B

Plaque latérale et support AR : SCX10III B

Piastre laterali e rinforzi posteriori: SCX10III B

6-Schrauben-Differenzial-Sicherung Blocage différentiel à 6 boulons Blocco differenziale 6 bulloni

6-Schrauben-SchwerlastZahnradsatz

Ensemble d'engrenages haute résistance à 6 boulons

Set ingranaggio impieghi gravosi 6 bulloni

Wild Boar-Antriebswellensatz: UTB

Ensemble d'arbres de transmission Set albero di trasmissione Wild

Wild Boar : UTB

Boar: UTB

12-mm-Sechskantstift und Abstandhalter (4): UTB

Broche hexagonale 12mm et entretoise (4) : UTB

Distanziale e perno esagonale 12mm (4): UTB

AR45 Achsgehäuse, Front

AR45 Carter d'essieu avant

AR45 Allogg assale ant

AR45 Achsgehäuse, Heck

AR45 Carter d'essieu arrière

AR45 Allogg assale post

Metallgetriebe Eingabe 27T, 20T und 34T

Engrenages métalliques d'entrée Ingranaggi in metallo ingresso

27T, 20T et 34T

27T, 20T e 34T

AR45 C-Hub

AR45 Moyeu de support

AR45 Supporto mozzo

AR45 Lenkrolle

AR45 Rotule de direction

AR45 Fuso a snodo

AR45 Universalachsensatz

AR45 Ensemble d'essieux universels AR45 Set assale univ

AR45 Gerade Achse (2)

AR45 Essieu droit (2)

AR45 Assale dritto (2)

Fahrwerkabdeckung & TransGehäuse: LCX

Cache d'engrenage et carter transmission : LCX

Carter e coperchio trasmissione: LCX

Stirnrad, 56T, 32P: LCXU

Engrenage roue droite, 56T, 32P : LCXU

Corona, 56T, 32P: LCXU

Motorplatte: LCXU

Plaque moteur : LCXU

Piastra motore: LCXU

Slipper-Eliminator-Nabe & -Platte: Moyeu et plaque de sabot

LCX

éliminateur : LCX

Piastra e mozzo elimina scorrimento: LCX

Metallgetriebesatz: LCX

Ensemble de boîte de transmission métallique : LCX

Set ingr trasmissione metallo:LCX

Getriebewellensatz: LCXU

Ensemble arbre de transmission : LCXU

Set alberi trasmissione: LCXU

Transzentrale Antriebswelle: LCXU

Arbre sortie transmis centrale : LCXU

Albero uscita trasmissione centrale: LCXU

O-Ring-Satz für den Stoßdämpfer: Ensemble de joints toriques

UTB

d'amortisseur : UTB

Set O-Ring ammortizzatore: UTB

Feder 13 x 70 mm 2 lbs/in Gelb (2) Ressort 13 x 70 mm 2 lb/po jaune (2) Molla 13 x 70 mm 2 lbs/in Giallo (2)

Stoßdämpferteile, gegossen

Pièces de l'amortisseur moulées Parti ammortizzatore stampate

Gewinde-Stoßdämpfergehäuse Alum 11 x 39,5 mm

Corps d'amortisseur fileté aluminium 11 x 39,5 mm

Scocca ammortizzatore filettata in alluminio 11x39,5 mm

Kugelzapfen, Edelstahl 12,75 mm (4): UTB

Rotule, acier inoxydable 12,75mm Pivot ball, inossidabile, 12,75mm

(4) : UTB

(4): UTB

Kugelzapfen für Federung, Edelstahl Rotule de suspension, acier

7,5 mm

inoxydable 7,5mm

Pivot ball sospensioni, indossabile, 7,5mm

Schwerlast-Stangenköpfe M4 (20): Embouts de bielle haute résistance Teste a snodo per impiego

UTB

M4 (20) : UTB

gravoso M4 (20): UTB

56

Part #

Description

Beschreibung

Description

Descrizione

AXI234035

Susp Link Set 313WB: SCX10III B

Aufhängungsverbindungssatz 313WB: SCX10III B

Jeu de bras de suspension 313WB : SCX10III B

Set bracci sospensioni 313WB: SCX10III B

AXI235014

M2.5 x 10mm, Cap Head Screw (10 Inbusschraube, M2,5 x 10mm (10)

Vis d'assemblage creuse, M2,5 x Vite a testa cilindrica M2,5 x

10mm (10)

10mm (10)

AXI235099 M2.5 x 10mm, Button Head (10)

Rundkopfschraube, M2,5 x 10mm (10) Vis à tête bombée, M2,5 x 10mm (10) Vite a testa tonda M2,5 x 10mm (10)

AXI235109 M3 x 14mm, Button Head Screw(10 Rundkopfschraube, M3 x 14mm (10) Vis à tête bombée, M3 x 14mm (10) Vite a testa tonda M3 x 14mm (10)

AXI235110 M3 x 16mm, Button Head Screw(10 Rundkopfschraube, M3 x 16mm (10) Vis à tête bombée, M3 x 16mm (10) Vite a testa tonda M3 x 16mm (10)

AXI235178

M3 x 14mm, Flat Head Screw (10)

Sechskant-Flachkopfschraube, M3 x Douille à six pans à tête plate M3 x Vite a testa piana esagonale M3 x

14mm, schwarz (10)

14mm noire (10)

14mm nero (10)

AXI235230

M2.5 x 18mm Cap Head Screw (10) Inbusschraube, M2,5 x 18mm (10)

Vis d'assemblage creuse, M2,5 x Vite a testa cilindrica M2,5 x

18mm (10)

18mm (10)

AXI236136 C-Clip, 5mm (10)

C-Clip, 5mm (10)

C-Clip, 5mm (10)

C-Clip, 5mm (10)

AXI236172 Screw Shaft M3x2.0x12mm

Schraubenschaft M3 x 2,0 x 12 mm Tige de vis M3 x 2 x 12 mm

Albero filettato M3x2x12mm

AXI237009 5mmx13mmx4mm Ball Bearing (2) Lager 5mm x 13mm x 4mm (2)

Roulement 5mm x 13mm x 4mm (2) Cuscinetto 5mm x 13mm x 4mm (2)

AXI43014

1.9 Falken WILDPEAK M/T 4.7" R3

1.9 Falken WILDPEAK M/T 4.7" R3

Pneus Falken WILDPEAK M/T R3 1,9 4,7 po

1.9 Falken WILDPEAK M/T 4.7" R3

AXI43015

1.9 Black Rhino Primm Whl Blk(2

1.9 Black Rhino Primm-Räder schwarz (2

Jantes noires Black Rhino Primm 1.9 (2

1.9 Black Rhino Primm nere (2)

AXIC0012

AXA120 Hex Socket Btn Hd M3x25

AXA120 Innensechskantschraube, Rundkopf, M3 x 25

AXA120 Douille hexagonale à tête bombée M3 x 25

AXA120 Vite cil esag inc M3x25

AXIC0013

AXA013 Cap Hd M2x6mm Blk Oxide

AXA013 Kappenkopf M2 x 6 mm, Schwarz, AXA013 Vis d'assemblage creuse

Oxid

M2x6mm brunie

AXA013 Viti testa tonda M2x6 mm nero ossido

AXIC0114

AXA114 Hex Skt Butn Hd M3x8mm

AXA114 Innensechskantschraube, Rundkopf, M3 x 8 mm

AXA114 Douille hexagonale à tête bombée M3 x 8 mm

AXA114 Vite cil esag inc M3x8 mm

AXIC0115

AXA115 Hex Skt Butn Head M3x10

AXA115 Innensechskantschraube, Rundkopf, AXA115 Douille hexagonale à tête

M3 x 10 mm

bombée M3 x 10

AXA115 Vite cil esag inc M3x10 mm

AXIC0116

AXA116 Hex Skt Butn Hd M3x12mm

AXA116 Innensechskantschraube, Rundkopf, AXA116 Douille hexagonale à tête

M3 x 12 mm

bombée M3 x 12 mm

AXA116 Vite cil esag inc M3x12 mm

AXIC0118

AXA144 Hex Flt Hd M3x8mm Blk10

AXA144 Innensechskantschraube, Flachkopf M3 x 8 mm Schwarz 10

AXA144 Douille hexagonale à tête plate AXA144 Vite piatta esag M3x8

M3 x 8 mm noire 10

mm nero (10)

AXIC0146

AXA146 Hex Skt Flat Hd M3x12mm

AXA146 Innensechskantschraube, Flachkopf, M3 x 12 mm

AXA146 Douille hexagonale à tête plate AXA146 Vite piatta esag inc

M3 x 12 mm

M3x12 mm

AXIC0218 AXA1218 Bearing 5x10x4mm

AXA1218 Lager 5 x 10 x 4 mm

AXA1218 Roulement 5 x 10 x 4 mm AXA1218 Cuscinetto 5x10x4 mm

AXIC0221 AXA1221 Bearing 5x11x4mm

AXA1221 Lager 5 x 11 x 4 mm

AXA1221 Roulement 5 x 11 x 4 mm AXA1221 Cuscinetto 5x11x4 mm

AXIC0225 AXA1225 Bearing 8x16x5mm

AXA1225 Lager 8x16x5mm

AXA1225 Roulement 8x16x5mm AXA1225 Cuscinetto 8x16x5mm

AXIC0230 AXA1230 Bearing 10x15x4mm

AXA1230 Lager 10 x 15 x 4 mm

AXA1230 Roulement 10 x 15 x 4 mm AXA1230 Cuscinetto 10 x 15 x 4 mm

AXIC0286 AXA0286 Screw Shaft M4x2.5x12 Schraubenschaft M4 x 2,5 x 12 mm Tige de vis M4 x 2,5 x 12mm

Albero filettato M4 x 2.5 x 12mm

AXIC0291

AXA291 Set Scr M4x4mm Blk Ox(6

AXA291 Schraubensatz M4 x 4 mm, Schwarz, Oxid

AXA291 Vis de fixation M4 x 4 mm brunie

AXA291 Grano M4 x 4 mm nero ossido

AXIC0392 AXA1392 E-clip E2 (10)

E-Clip E2 (10)

E-Clip, E2 (10)

E-Clip, E2 (10)

AXIC0569 AX30569 Pinion 48P 14T Steel

Ritzel 48P 14T Stahl

Pignon 48P 14T en acier

Pignone 48P 14T acciaio

AXIC1009

AXA0109 Hex Skt Oversize M3x10mm

AXA0109 Innensechskantschraube, Übergröße, M3 x 10 mm

AXA0109 Douille hexagonale surdimensionnée M3 x 10 mm

AXA0109 Viti oversize esag inc M3x10 mm

AXIC1028 AX31028 Pin 2.0x11mm (6)

Stift 2 x 11mm (6)

Axe 2 x 11mm (6)

Perno 2 x 11mm (6)

AXIC1059

AXA1059 Body Clip 6mm Black(10)

AXA1059 Karosserieklemmen 6 mm AXA1059 Clips de carrosserie

(10)

6 mm (10)

AXA1059 Clip carrozzeria 6 mm (10)

AXIC1120

AX31120 Hex Skt Flat 3x10mm(10)

Sechskant-Flachkopfschraube, M3 Douille à six pans à tête plate M3 Vite a testa piana esagonale M3

x 10mm (10)

x 10mm (10)

x 10mm (10)

AXIC1148

AX31148 Wb8-hd Drvshft Coupler

WB8-HD Antriebswelle Koppler-Satz

Ensemble de coupleur d'arbre de transmission WB8-HD

Set accoppiatore dell'albero di trasmissione WB8-HD

AXIC1180

AXA118 Hex Socket BtnHd M3x18mm(10)

Sechskant-Rundkopfschraube, M3 Douille à six pans à tête bombée Vite a testa tonda con esagono

x 18mm

M3 x 18mm

incassato M3 x 18mm

AXIC1181

AXA119 Hex Socket Btn Hd M3x20(10)

AXA119 Innensechskantschraube, Rundkopf, AXA119 Douille hexagonale à tête

M3x20(10)

bombée M3x20(10)

AXA119 Vite cil esag inc M3x20(10)

AXIC1213 AXA1213 Bearing 5x8x2.5mm (2)

AXA1213 Lager 5x8x2.5mm (2)

AXA1213 Roulement 5x8x2.5mm (2) AXA1213 Cuscinetto 5x8x2.5mm (2)

AXIC1391 AXA1391 E-Clip E4 (10)

E-Clip, 4mm

E-Clip, 4mm

E-Clip, 4mm

AXIC3066

AX31066 Cap Hd M2x8mm Blk (10)

Inbusschraube M2 x 8mm, schwarz Vis d'assemblage creuse M2 x

(10)

8mm noire (10)

Vite a testa cilindrica M2 x 8mm nero (10)

AXIC3150 AX31250 Ser Nyl Nut Blk 4mm(10) Feststellkontermutter mit Flansch M4 (10) Contre-écrou à embase M4 strié (10) Controdado flangiato dentellato M4 (10)

AXIC3165 AX30165 Pin 2.5x12mm (6)

AX30165 Stift 2.5x12mm (6)

AX30165 Axe 2.5x12mm (6)

AX30165 Perno 2.5x12mm (6)

AXIC3373

AX31373 Hex Bttn Head M2.6x8mm Sechskant-Rundkopfschraube,

(10)

M2,6x8mm

Douille à six pans à tête bombée Vite a testa tonda con esagono

M2,6x8mm

incassato M2,6x8mm

AXIC3374 AX31374 Body Clip Black 3mm(10) Karosserieklemmen 3 mm (10)

Clips de carrosserie 3 mm (10)

Clip carrozzeria 3 mm (10)

AXIC4403 AX31403 Bttn Hd Scrw M3x4x10mm (6) Rundkopfschraube, M3x4x10mm (6) Vis à tête bombée, M3x4x10mm (6) Vite a testa tonda M3x4x10mm (6)

AXIC4406 AX31406 Bearing 7x14x3.5mm (2) Lager 7x14x3,5mm

Roulement 7x14x3,5mm

7x14x3,5mm

AXIC4407 AX31407 Bearing 5x14x5mm (2)

Lager 5x14x5mm

Roulement 5x14x5mm

7x14x3,5mm

DYNS1216 Dynamite 35-Turn 540 Brushed Motor 35T Elektromotor

Moteur électrique 35T

Motore elettrico 35T

SPMRSLT300 SLT3 3CH 2.4Ghz SLT TX Only

SLT3 Sender

SLT3 émetteur

SLT3 trasmettitore

SPMS614 S614 Metal Gear Servo 23T WP

SS614 Stahlgetriebeservo 23T WP

Servo étanche à engrenages métalliques S614

S614, servo ingr metallo imp, 23T

SPMSR315 SR315 DSMR 3 CH Receiver

SR315 DSMR Empfänger

récepteur SR315 DSMR

SR315 DSMR ricevitore

SPMXSE1040 40A Sensored Brushed Smart ESC 40 Amp Geschwindigkeitsregler

ESC 40 Amp

ESC 40 Amp

57

RECOMMENDED PARTS // EMPFOHLENE TEILE// PIÈCES RECOMMANDÉES // PARTI CONSIGLIATE

Part #

Description

Beschreibung

Description

Descrizione

DYNB37353

11.1V 3700mAh 3S 50CLiPo 96mmEC3

11,1V 3700mAh 3S 50CLiPo 96mmEC3

11,1V 3700mAh 3S 50CLiPo 96mmEC3

11,1V 3700mAh 3S 50CLiPo 96mmEC3

DYNB5025H3

7.4V 5000mAh 2S50C LiPo, Hardcase: EC3

7,4 V 5000 mAh 2S 50C LiPo, Hartschale: EC3

Li-Po 7,4 V 5000 mAh 2S 50C, boîtier : 7,4 V 5000 mAh 2S 50C LiPo,

EC3

hardcase: EC3

DYNB5035H3

11.1V 5000mAh 3S 50C LiPo,Hrdcs:EC3

11,1 V 5000 mAh 3S 50C LiPo, Hartschale: EC3

Li-Po 11,1 V 5 000 mAh 3S 50 C, boîtier : EC3

11,1 V 5000 mAh 3S 50C LiPo, hardcase: EC3

DYNC2030

Prophet Sport Mini 50W Charger Prophet Sport Mini 50W Ladegerät

Chargeur Prophet Sport Mini, 50W

Caricabatterie Prophet Sport Mini, 50W

DYNC3015

P1 Mini AC Balance Char/ Dischar

Prophet Sport Mini AC Ladegerät

Chargeur Prophet Sport Mini, AC

Caricabatterie Prophet Sport Mini, AC

DYNC3016

Passport P2 2 Port AC/DC MultiCharger

Passport P2 2-Port-AC / DC-MultiLadegerät

Passport P2 Chargeur multiple AC / Passport P2 Caricatore multiplo

DC à 2 ports

CA / CC a 2 porte

DYNC3017

Passport P4 AC/DC 4 Port Multicharger

Passport P4 4-Port-AC / DC-MultiLadegerät

Passport P4 Chargeur multiple AC / Passport P4 Caricatore multiplo

DC à 4 ports

CA / CC a 4 porte

DYNS0900

Brushed Crawler Combo 35T

Gebürsteter Crawler Combo 35T

Brossé Crawler Combo 35T

Combo cingolato spazzolato 35T

SPMSS6250

S6250 U-T / H-S Digital HV WP S6250 U-T / H-S Digitales

Servo

wasserdichtes Servo

S6250 U-T / H-S Servo étanche numérique

S6250 U-T / H-S Servo impermeabile digitale

SPMSS6280

S6280 U-T / H-S Digital HV WP S6280 U-T / H-S Digitales

Servo

wasserdichtes Servo

S6280 U-T / H-S Servo étanche numérique

S6280 U-T / H-S Servo impermeabile digitale

SPMX50002S100H3 5000mAh 2S 7.4V Smart 100C; IC3 5000mAh 2S 7,4V Smart 100C; IC3

5000mAh 2S 7,4V Smart 100C; IC3

5000mAh 2S 7,4V Smart 100C; IC3

SPMX50002S30H3 5000mah 2S 7.4V Smart 30C; IC3 5000mah 2S 7,4V Smart 30C; IC3

5000mah 2S 7,4V Smart 30C; IC3

5000mah 2S 7,4V Smart 30C; IC3

SPMX50002S50H3 5000mAh 2S 7.4V Smart 50C; IC3 5000mAh 2S 7,4V Smart 50C; IC3

5000mAh 2S 7,4V Smart 50C; IC3

5000mAh 2S 7,4V Smart 50C; IC3

SPMX50003S100H3 5000mAh 3S 11.1V Smart 100C; IC3 5000mAh 3S 11,1V Smart 100C; IC3

5000mAh 3S 11,1V Smart 100C; IC3

5000mAh 3S 11,1V Smart 100C; IC3

SPMX50003S30H3 5000mah 3S 11.1V Smart 30C; IC3 5000mah 3S 11,1V Smart 30C; IC3

5000mah 3S 11,1V Smart 30C; IC3

5000mah 3S 11,1V Smart 30C; IC3

SPMX50003S50H3 5000mAh 3S 11.1V Smart 50C; IC3 5000mAh 3S 11,1V Smart 50C; IC3

5000mAh 3S 11,1V Smart 50C; IC3

5000mAh 3S 11,1V Smart 50C; IC3

SPMXC1000

Smart S1200 DC Charger, 1x200W

Smart S1200 Gleichstrom-Ladegerät, 1x200 W

Chargeur CC Smart S1200, 1x200 W

Caricabatterie Smart S1200 CC, 1x200 W

SPMXC1010

Smart S2100 AC Charger, 2X100W

Smart S2100 Gleichstrom-Ladegerät, 2x100 W

Chargeur CC Smart S2100, 2x100 W

Caricabatterie Smart S2100 CC, 2x100 W

SPMXC1050

Smart S1500 DC Charger, 1x500W

Smart S1500 Gleichstrom-Ladegerät, 1x500 W

Chargeur CC Smart S1500, 1x500 W

Caricabatterie Smart S1500 CC, 1x500 W

SPMXC1070

Smart S150 AC/DC Charger, 1x50W

Smart S150 Gleichstrom-Ladegerät, 1x50 W

Chargeur CC Smart S150, 1x50 W

Caricabatterie Smart S150 CC, 1x50 W

SPMXC1080

Smart S1100 AC Charger, 1x100W

Smart S1100 Gleichstrom-Ladegerät, 1x100 W

Chargeur CC Smart S1100, 1x100 W

Caricabatterie Smart S1100 CC, 1x100 W

OPTIONAL PARTS // OPTIONALE TEILE // PIÈCES FACULTATIVES // PARTI OPZIONALI

Part # AXI230025
AXI231013 AXI231015 AXI332001 AXIC0724 AXIC0725 AXIC0726 AXIC0727 AXIC7028 SPMXSE1060
SPMXSEMC08 SPMXSM3001 SPMXSM3002

Description

Beschreibung

Description

Descrizione

Uni Body Post Set: SCX10 III

Universal-Gehäusestangensatz

Ensemble de poteaux de carrosserie Set supporti carrozzeria

universels

universale

Servo Horn, Metal 25T: SCX10III Servohorn, Metall 25T

Renvoi de commande de servo, métal 25T

Squadretta servo, Metallo 25T

Frame Rail Set: SCX10III

Rahmenschienensatz

Ensemble de rails du cadre

Set guida telaio

6-Bolt 27/8 Overdrive Gear Set

6-Schrauben-27/8-Overdrive-Zahnradsatz

Ensemble d'engrenages d'overdrive à 6 boulons 27/8

Set di ingranaggi Overdrive 27/8 a 6 bulloni

AX30724 Pinion Gear 32p 13t AX30724 Zahnradgetriebe 32p 13t AX30724 Engrenage à pignons 32p 13t AX30724 Pignone 32p 13t

AX30725 Pinion Gear 32p 14t AX30725 Zahnradgetriebe 32p 14t AX30725 Engrenage à pignons 32p 14t AX30725 Pignone 32p 14t

AX30726 Pinion Gr 32p 15t 3mm AX30726 Zahnradgetriebe 32p 15t AX30726 Engrenage à pignons 32p 15t AX30726 Pignone 32p 15t

AX30727 Pinion Gear 32p 16t AX30727 Zahnradgetriebe 32p 16t AX30727 Engrenage à pignons 32p 16t AX30727 Pignone 32p 16t

AX30728 Pinion Gear 32P 17T AX30728 Zahnradgetriebe 32p 17t AX30728 Engrenage à pignons 32p 17t AX30728 Pignone 32p 17t

Firma 60ASenseBL Smart Cr ESC

Firma 60 A bürstenloser SmartGeschwindigkeitsregler

Variateur ESC sans balais 60 A Smart Firma

Smart ESC Firma 60 A Brushless

Firma Sense 1/10 Cr Sys Smart

Firma Sense 1/10 Stromversorgungssystem Firma Sense 1/10 système du pouvoir Firma Sense 1/10 sistema di

Smart

Smart

alimentazione Smart

Firma 2100kv BL Sense Cr Mot FIRMA 2100 Kv bürstenloser Motor

Moteur sans balais 2 100 Kv FIRMA Motore BL FIRMA 2100 Kv

Firma 2800kv BL Sense Cr Mot FIRMA 2800 Kv bürstenloser Motor

Moteur sans balais 2 800 Kv FIRMA Motore BL FIRMA 2800 Kv

ELECTRONICS // ELECTRONIK // COMPOSANTS ÉLECTRONIQUES // ELETTRONICA

Part # DYNS1216 SPMRSLT300 SPMS614 SPMSR315 SPMXSE1040

Description 35-Turn 540 Brushed Motor SLT3 3CH 2.4Ghz SLT TX Only Metal Gear Servo SR315 DSMR 3 CH Receiver 40A Brushed ESC

Beschreibung 35T Elektromotor SLT3 3CH Sender Metallgetriebeservo SR315 DSMR 3 CH Empfänger 40 Amp Geschwindigkeitsregler

Description Moteur électrique 35T SLT3 3CH Émetteur Servo à engrenages métalliques Récepteur SR315 DSMR 3 CH ESC 40 Amp

Descrizione Motore elettrico 35T SLT3 3CH Trasmettitore Servo, ingranaggio metallico Ricevitore SR315 DSMR 3 CH ESC 40 Amp

58

NOTES // ANMERKUNGEN // REMARQUES // NOTA
59

facebook.com/axialinc | instagram.com/axialracing | twitter.com/axialrc youtube.com/axialvideos | flickr.com/axialrc

©2021 Horizon Hobby, LLC.

Axial, the Axial logo, SCX-10, DSM, DSMR, SLT3, IC3, EC3, Passport, and the Horizon Hobby logo are trademarks or registered trademarks of Horizon Hobby, LLC.

The Spektrum trademark is used with permission of Bachmann Industries, Inc. All other trademarks, service marks and logos are property of their respective owners.

US 9,930,567. US 10,419,970. US 10,849,013. Other patents pending.

Completed 10/21

AXI03027

233306
References

Adobe InDesign 17.0 (Macintosh) Adobe PDF Library 16.0.3