CR5000 Configuration Guide
Configuration barcodes generated based on current firmware versions
Document ID: D036893_01
Date: 4-29-2020
Visit www.codecorp.com for more information.
Find more resources on YouTube.com/codecorporation.
Bluetooth Settings
T500 Bluetooth® iOS Keyboard Mode:
T500 Bluetooth® Disconnect:
T500 Bluetooth® HID Keyboard Mode:
T500 Bluetooth® Serial Port Profile (SPP) One-way Mode:
T500 Bluetooth® iOS App Mode:
T500 Bluetooth® Serial Port Profile (SPP) Two-way Mode:
Intentionally Blank:
General Reading Mode Settings
Off-Counter Detect Motion Mode:
On-Counter Detect Motion Mode:
Enable Stand Alone Age Verification - Default:
Disable Stand Alone Age Verification - Default:
Off-Table Trigger Mode - Default:
On-Table Trigger Mode:
Off-Table Detect Barcode Mode:
On-Table Always On Mode:
Off-Table Always On Mode:
On-Table Detect Barcode Mode - Default:
On-Table Pick List Mode:
Off-Table Pick List Mode:
Mirroring On:
Mirroring Off - Default:
Targeting On - Default:
Targeting Off:
Cell Phone Reading Enhancement On - Default:
Cell Phone Reading Enhancement Off:
Intentionally Blank:
Data Formatting (Prefix/Suffix) Settings
Turn on Timestamp Prefix:
Turn off Timestamp Prefix - Default:
Convert output to lowercase:
Erase Prefix & Suffix Data - Default:
Erase Prefix Data - Default:
Erase Suffix Data - Default:
Prefix AIM ID On:
Prefix AIM ID Off - Default:
Prefix Carriage Return Line Feed (RS232 Mode Only):
Prefix Comma:
Prefix Space:
Prefix Tab (USB Keyboard Mode Only):
Prefix Tab (RS232 Mode Only):
Suffix Carriage Return (RS232 Mode Only):
Suffix Carriage Return Line Feed (RS232 Mode Only):
Suffix Comma:
Suffix Enter (USB Keyboard Mode Only):
Suffix Line Feed (RS232 Mode Only):
Suffix Space:
Suffix Tab (USB Keyboard Mode Only):
Suffix Tab (RS232 Mode Only):
Translate all Characters to Uppercase On:
Translate all Characters to Uppercase Off - Default:
Symbology Settings
Codabar Off:
Remove Codabar Start and Stop Delimiters:
Keep Codabar Start and Stop Delimiters - Default:
Codablock F On:
Codablock F Off - Default:
Code 11 On:
Code 11 Off - Default:
Code 11 Checksum Stripped from Result On:
Code 32 (Italian Pharmacode) On:
Code 32 (Italian Pharmacode) Off - Default:
Code 39 Off:
Code 39 On - Default:
Code 39 Checksum On:
Code 39 Checksum Off - Default:
Code 39 Checksum Stripped from Result On:
Code 39 Extended Full ASCII Off - Default:
Code 39 Extended Full ASCII On:
Code 93 On - Default:
Code 93 Off:
Code 128 On - Default:
Code 128 Off:
Composite On:
Composite Off - Default:
Data Matrix Inverse On - Default:
Data Matrix Inverse Off:
Data Matrix Rectangular On & Rectangular Extended On:
Data Matrix Rectangular On & Rectangular Extended Off - Default:
Data Matrix Rectangular & Rectangular Extended Off:
Grid Matrix On:
Grid Matrix Off - Default:
All GS1 DataBar On - Default:
All GS1 DataBar Off:
GS1 DataBar Limited On:
GS1 DataBar Limited Off:
GS1 DataBar Expanded On:
GS1 DataBar Expanded Off:
GS1 DataBar Expanded Stacked On:
GS1 DataBar Expanded Stacked Off:
GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional On:
GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional Off:
GS1 DataBar Omnidirectional and GS1 DataBar Truncated On:
GS1 DataBar Omnidirectional and GS1 DataBar Truncated Off:
Han Xin On:
Han Xin Off - Default:
Hong Kong 2 of 5 Off - Default:
Hong Kong 2 of 5 On:
Int 2 of 5 On - Default:
Int 2 of 5 Off:
Int 2 of 5 Checksum Stripped from Result On:
Int 2 of 5 Checksum On:
Int 2 of 5 Checksum Off - Default:
Japan Post On:
Japan Post Off - Default:
KIX (Dutch Post) Code On:
KIX (Dutch Post) Code Off - Default:
Korean Post On:
Korean Post Off - Default:
Maxicode On:
Maxicode Off - Default:
Matrix 2 of 5 On:
Matrix 2 of 5 Off - Default:
Micro PDF417 On:
Micro PDF417 Off - Default:
MSI Plessey On:
MSI Plessey Off - Default:
NEC 2 of 5 On:
NEC 2 of 5 Off - Default:
PDF417 On - Default:
PDF417 Off:
Pharmacode On:
Pharmacode Reverse Barcode Decoding (Right to Left):
Pharmacode Normal Barcode Decoding (Left to Right):
Pharmacode Off - Default:
All QR Code On:
Standard QR Code On - Default:
All QR Code Off:
Straight 2 of 5 On:
Straight 2 of 5 Off - Default:
Telepen On:
Output Telepen as ASCII:
Output Telepen as Numeric - Default:
Telepen Off - Default:
Trioptic On:
Trioptic - Enable Reverse Order option (Bit 3):
Trioptic - Disable Reverse Order option (Bit 3) - Default:
Trioptic Off - Default:
UK Plessey On:
UK Plessey Off - Default:
UK Royal Mail On:
UK Royal Mail Off - Default:
UPC Off:
UPC On - Default:
UPC Supplemental On:
Transmit UPC-A Number System Off:
UPC Supplemental Off - Default:
Transmit UPC-A Check Digit On - Default:
Transmit UPC-A Check Digit Off:
Transmit UPC-A Number System On - Default:
Convert UPC-A to EAN-13 On:
Convert UPC-A to EAN-13 Off - Default:
UPC-E Expansion On:
UPC-E Expansion Off - Default:
Transmit UPC-E Check Digit On - Default:
Transmit UPC-E Check Digit Off:
Transmit UPC-E Number System On - Default:
Transmit UPC-E Number System Off:
Transmit EAN-8 Check Digit On - Default:
Transmit EAN-8 Check Digit Off:
Convert EAN-8 to EAN-13 On:
Convert EAN-8 to EAN-13 Off - Default:
Transmit EAN-13 Check Digit On - Default:
Transmit EAN-13 Check Digit Off:
Convert Bookland EAN-13 to ISBN On:
Convert Bookland EAN-13 to ISBN Off - Default:
Convert Bookland EAN-13 to ISSN On:
Convert Bookland EAN-13 to ISSN Off - Default:
UPU ID-Tag On:
UPU ID-Tag Off - Default:
USPS Intelligent Mail/IMB/ 4-State CB On:
USPS Intelligent Mail/IMB/ 4-State CB Off - Default:
USPS Planet On:
USPS Planet Off - Default:
USPS Postnet On:
USPS Postnet Off - Default:
Grid Matrix & Grid Matrix Inverse Decoding On:
Grid Matrix & Grid Matrix Mirror Decoding On:
Grid Matrix, Grid Matrix Inverse & Grid Matrix Mirror Decoding:
GoCode & GoCode Inverse Decoding:
GoCode & GoCode Mirror Decoding On:
GoCode, GoCode Inverse & GoCode Mirror Decoding On:
Code 11 Decoding with one checksum digit checked, and remove checksum from output On:
Intentionally Blank:
Keyboard Language Settings
Keyboard Support: French Keyboard Mapping for Apple:
Keyboard Support: USInternational (Universal) Keyboard Mapping for Windows:
English Keyboard Mapping for Apple:
Keyboard Support: Spanish Keyboard Mapping for Apple:
Italian Keyboard Mapping for Apple:
German-Swiss Keyboard Mapping for Apple:
German Keyboard Mapping for Apple:
Russian Keyboard Mapping for Windows:
Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default:
Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows:
Reader (Legacy) - US English Keyboard Mapping - with Leading 0 for Non Printable ASCII - Default:
Shift-JIS Mode for Japanese Windows OS:
Shift-JIS Mode for English Windows OS:
Operating System Settings
Alternative Operating System (Linux/Mac) On:
Alternative Operating System (Linux/Mac) Off - Default:
USB Settings
Reset to USB Factory Defaults:
USB Keyboard Mode:
USB Downloader Mode:
USB HID POS Mode (Terminal ID 131):
USB Native Two Way Mode:
USB Virtual COM One Way Mode:
USB Virtual COM Multiple Ports:
USB Virtual COM Common Ports:
USB Speed High Speed - Default:
USB Speed Full Speed:
RS232 Settings
Reader - Enable RS232 OPOS/JPOS:
Reset to RS232 Factory Defaults:
RS232 Interface 1200 Baud Rate:
RS232 Interface 2400 Baud Rate:
RS232 Interface 4800 Baud Rate:
RS232 Interface 9600 Baud Rate:
RS232 Interface 19200 Baud Rate:
RS232 Interface 38400 Baud Rate:
RS232 Interface 57600 Baud Rate:
RS232 Interface 115200 Baud Rate - Default:
RS232 Interface 7 Data Bits:
RS232 Interface 8 Data Bits - Default:
RS232 Interface Stop Bits 1 - Default:
RS232 Interface Stop Bits 2:
RS232 Interface Even Parity:
RS232 Interface Odd Parity:
RS232 Interface No Parity - Default:
RS232 Interface Flow Control Off - Default:
RS232 Interface Flow Control - Hardware:
Reader Feedback Settings
RS232 Packet Mode:
RS232 Raw Mode - Default:
Beep Volume 100% - Default:
Beep Volume 67%:
Beep Volume 33%:
Accept non-DL PDF417 in AV Mode:
Beep Volume 0%:
Reject non-DL PDF417 in AV Mode - Default:
Honor Expiration Date in AV Mode - Default:
Ignore Expiration Date in AV Mode - Default:
Output Good Read on RTS line Off - Default:
Output Good Read on RTS line - Active Low:
Output Good Read on RTS line - Active High:
Miscellaneous Settings
Locked Reader Accept Host Commands - Default:
Locked Reader Reject Host Commands:
Reader/Modem Command Settings
Reader ID and Firmware Version:
Reader Text Commands On:
Reader Text Commands Off - Default:
Enable Responses to Text Commands:
Reset, Clear and Save Reader Settings
Clear All JavaScript Rules:
Clear All Stored Data and Images:
Save All Reader Settings - Default:
Reboot Reader:
Intentionally Blank:
TCPDF