Installation Guide for Q-TRAN models including: QZ-STICK LED Power Supply, QZ-STICK, LED Power Supply, Power Supply, Supply

Q-STICK Applications/Install

QZ-STICK 96W LED Driver | Q-Tran


File Info : application/pdf, 5 Pages, 624.16KB

PDF preview unavailable. Download the PDF instead.

INSTALL PSC QZ-S ?d=44202383142
INSTALLATION LED POWER SUPPLY - QZ-STICK

4 2

TOP VIEW
1
DRIVER COMPARTMENT

3 4

QZ-STICK Components

1 Driver Compartment

2 Primary Compartment 3 Secondary Compartment

4 Mounting Tab Slots

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-04-04-23

INSTALLATION LED POWER SUPPLY - QZ-STICK

Required Hardware

· #4 Flat head screw (not included)

.625"

.21"

Mounting

1

The QZ-STICK can be mounted either vertically or horizontally, utilizing the supplied screws and the mounting tabs on

the bottom of the enclosure

SIDE SLOT

2 The QZ-STICK must be mounted into a stud for sufficient support, using the slots of each mounting tab

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-04-04-23

INSTALLATION LED POWER SUPPLY - QZ-STICK
3 When installing multiple QZ-STICK power supplies, seperate the enclosures by 3" of space from edge to edge. This
prevents the rise of ambient temperature between the power supplies.
3.0" 3.0"
3.0"

Horizontal mount illustrated above

Vertical mount illustrated above

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-04-04-23

LED LED

INSTALLATION LED POWER SUPPLY - QZ-STICK

4 W i r i ng d i ag r am

Phase Dimming
96W
Phase Dimmer

- DIM + - OUTPUT +

+

LED OUTPUT

-

+

DIMMING
0/1-10V

L

L

INPUT

N

N

GND NEU HOT

INPUT

96W

-

0-10v Dimming

96W
0-10V Dimmer

- DIM + - OUTPUT +

+

LED OUTPUT

-

L

L

INPUT

N

N

GND NEU HOT

INPUT

96W

+

DIMMING
0/1-10V

-

This wire can be pink or grey

Wiring from power supply to light fixture must be two conductor cable

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-04-04-23

INSTALLATION LED POWER SUPPLY - QZ-STICK
QZ-STICK 96W

TOP VIEW 13"

1.18"

SIDE VIEW 13"

0.88"

© 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com

Specification subject to change. Rev-04-04-23



References

Adobe PDF Library 17.0 Adobe InDesign 18.2 (Macintosh)