M8 Mobile Phone Selfie Monitor

Product Introduction

The M8 is a 3.97-inch LCD screen designed for mobile phones. It is portable and features a magnetic back for attachment to phones or other iron surfaces. The device utilizes a 2.4G Wi-Fi wireless connection to mirror your phone's screen to the monitor. It supports brightness adjustment, screen rotation, size adjustment, and external sound output.

Product Parameters

• Product Model: M8
• Wireless Mode: WIFI 2.4G
• Transmission Distance: <15 meters
• Power Input: 5V=1.5A
• Power Dissipation: 450mA
• Battery Capacity: 1250mAh
• Charging Port: USB-C (Type-C)
• Screen Size: 3.97 inches
• Resolution: 480x800 pixels
• Viewing Angle: Full viewing angle
• Brightness: Adjustable 400cd/m² (Max)
• Sound: Support
• Product Material: Profile
• Size: 106mm * 68mm * 14mm
• Weight: 120g
• Operating Temperature: 10~+40°C

Product Size Diagram

The product dimensions are approximately 106.9mm in length, 68.9mm in width, and 14.7mm in thickness.

Screen Mirroring

Wireless Connection

1. Slide down from the top right corner of your phone.
2. Select the device name: YMT-39725A.
3. If prompted, enter the device code: 1234.

Connection Steps

1. Open the screen mirroring icon on your phone.
2. Turn on WLAN and Bluetooth as shown in the prompt and click to turn on.
3. After clicking on screen projection, the device will search for available devices (approximately 3-10 seconds).
4. Select the device named YMT-39725A to project the screen.
5. Please enter 1234 for the prompt password.

Bluetooth Shutter

1. Turn on the Bluetooth controller.
2. Turn on Bluetooth in your phone's settings to search for devices. The search process is expected to last 3-10 seconds.
3. Find the Bluetooth device named AB Shutter 3 and pair it.
4. After successful connection, return to the photo-taking interface and use the controller to control the phone to take photos or videos.

Product Functions

• Aspect Ratio: Standard, stretched, full screen.
• Rotation: Single rotation 90° each time.
• Brightness Adjustment: Single click the brightness button for 3 levels of brightness.
• Power On/Off: Long press the power button for 3 seconds.
• Mute/Play Sound: Single click the power button when powered on.
• Charging: USB-C (Type-C) port.
• Switch Language/Reset: Press and hold the brightness adjustment button, then quickly double-click the power button.
• Channel Switching: Long press and hold the proportional key to switch channels. CM_A is the Chinese channel, and CM_B is the channel for Europe, America, and Japan. Select the appropriate channel for your region.

Language Selection

Please click the button at the bottom left to select your preferred language.

Available Languages: English, Chinese.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, as such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types Wireless Screen Monitor for Smart Phone with M8 (FCC ID: 2BPYG-M8) has also been tested against this SAR limit. The highest reported SAR values for body worn is 0.126W/kg. The Max simultaneous SAR is 0.126W/kg. This device was tested for typical body worn operations with the back of the handset kept 0mm from the body. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.