Introduction
This document serves as a user guide for the TTBIT USB Stick Miner, a compact device designed for cryptocurrency mining. It provides essential information for users to get started with their mining operations.
Key Features & Specifications
The TTBIT USB Stick Miner is equipped with two Bitmain BM1384 chips, similar to those found in the Bitmain S5. It offers a typical hashrate of 10-15+ GH/s, with an efficiency of approximately 0.31-0.35 watts per GH.
Getting Started
Accessories & Connection
Users will need a powered USB hub capable of supplying at least 1.0-2.0 amps per port. The connection process involves first connecting the USB hub to the host computer and then inserting the TTBIT USB Stick Miner into the USB hub.
Setup (Windows)
The guide outlines the steps for setting up the miner on Windows. This includes downloading and installing the modified cgminer software and the Zadig WinUSB driver. Specific links are provided for these downloads:
Detailed instructions are provided for driver installation using Zadig and for running cgminer with specific commands, including pool configuration.
Basic Troubleshooting
This section addresses common questions, such as cooling requirements (the miner has a built-in fan), compatibility with other devices, setting operational frequency, and determining how many miners can be run simultaneously based on USB hub power capabilities.
Mining Pools
Recommendations are provided for mining pools, with a specific suggestion for the Viabtc smart mining pool. Information on how Viabtc operates and links for signing up are included. Additional mining pool options are also listed: