Lexibook Toy Story Buzz Lightyear Projector Alarm Clock Radio
Brand: Lexibook
Reference: TOY STORY RP500TS
Codice: 33522641
Product Description
This is a Toy Story Projector Alarm Clock Radio featuring Buzz Lightyear.
Key Features and Controls:
- 1. MODE: Selects the operating mode.
- 2. SCAN: Searches for radio stations.
- 3. RADIO OFF / ON / VOLUME: Turns the radio on/off and adjusts volume.
- 4. RESET: Resets the radio frequency to initiate a new station search.
- 5. LCD Screen: Displays time and other information.
- 6. Battery Compartment: Located underneath the device.
- 7. Base with 'Night Light' activation feet: Activates the night light function.
- 8. SET: Selects settings.
- 9. ADJUST: Adjusts digits and activates the snooze function.
- 10. Buzz Lightyear Button: Triggers melodies.
- 11. Speaker: For audio output.
- 12. Projector: Projects time and Toy Story icons onto the ceiling.
- 13. PROJECT Button: Activates the projector.
Battery Information
The radio alarm clock projector operates with 4 x 1.5V === LR6/AA batteries (not included).
Before first use:
- Using a screwdriver, open the battery compartment cover located underneath the device.
- Insert 4 x 1.5V LR6/AA batteries (not included), observing the indicated polarity.
- Replace the cover and tighten the screws.
IMPORTANT NOTE: For best performance, it is recommended to use alkaline batteries with this product.
Battery Safety Precautions:
- Do not recharge non-rechargeable batteries.
- Remove rechargeable batteries from the product before recharging them.
- Rechargeable batteries should only be charged under adult supervision.
- Do not mix different types of batteries or rechargeable batteries, or new and used batteries or rechargeable batteries.
- Batteries and rechargeable batteries must be inserted respecting the polarity.
- Used batteries and rechargeable batteries must be removed from the product.
- The terminals of a battery or rechargeable battery must not be short-circuited.
- Do not dispose of batteries in fire.
- Remove batteries if the device will not be used for a prolonged period.
- This device should only be powered with the specified batteries.
Installation
Unpacking:
Upon unpacking, verify that the package contains the following items:
- 1 x Toy Story radio alarm clock projector
- 1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, strings, and labels, are not part of this product and should be disposed of.
ATTENTION: Significant electromagnetic interference or electrostatic discharges may cause malfunction or data loss. If the device does not function correctly, press the RESET button or remove and reinsert the batteries.
Settings
Clock
- To set the clock, press MODE 3 times.
- Press SET once: The minutes will flash.
- Set the minutes using the ADJUST button, then press SET to move to the next setting.
- Settings are made in the following order: Minutes → Hours → Date → Month → Day of the week.
- Confirm all settings by pressing MODE.
TIP: Keep the ADJUST button pressed to move more quickly between settings.
Date and Alarm Time
- In clock mode, keep the ADJUST button pressed to view the date.
- Keep the SET button pressed to check the alarm time.
Alarm
- To set the alarm, press MODE 2 times.
- Set the hour using the ADJUST button, then press SET to move to the next setting.
- Set the minutes using the ADJUST button, then press MODE to confirm.
- When the alarm sounds, press ADJUST to snooze for 5 minutes, or press SET to turn it off completely. The alarm will sound again the next day at the same time.
Activate or Deactivate Alarm
- In clock mode, press SET and ADJUST simultaneously. The symbol appears on the screen, indicating that the alarm is activated.
Hourly Chime
- To activate or deactivate the hourly chime, press and hold the SET button, then press MODE. If the day of the week is displayed at the top of the screen, the hourly chime is active.
Stopwatch
- Press MODE once.
- Press ADJUST to start or stop the stopwatch.
- Press SET to reset the stopwatch to zero.
- Press MODE to return to clock mode.
Radio
- Turn the RADIO OFF / ON / VOLUME knob clockwise to turn on the radio and increase the volume.
- Press SCAN to search for radio stations.
- Press RESET if you want to restart the search from the beginning of the frequency range.
- For optimal reception quality, extend the antenna to its maximum and orient it in all directions until you find the orientation that provides the best reception.
- Turn the RADIO OFF / ON / VOLUME knob counter-clockwise to decrease the volume and turn off the radio.
Melodies
- Press Buzz Lightyear to trigger one of the 4 pre-recorded melodies.
Night Light
- Press the base of the alarm clock once to activate the night light. Press the base again to turn it off.
- Note: When activated, the night light stays on for 1 hour.
Projector
- Press PROJECT to project the time and a Toy Story icon onto the ceiling. The projected image gradually fades after a few seconds.
Technical Specifications
FM Frequency Range | 87.5 – 108MHZ |
---|---|
Dimensions | H64 x L191 x 135mm |
Batteries | 4 x LR6/AA 1.5V |
Maintenance
To avoid any risk of electric shock or fire, unplug the device before cleaning. The exterior of the device can be cleaned with a soft, slightly damp cloth with lukewarm, non-soapy water. Pay particular attention when cleaning and drying plastic parts. For the front panel, you can use a damp cloth and mild soap if desired.
Warranty
This product is covered by a one-year warranty.
For after-sales service and complaints during the warranty period, contact your point of sale with a valid proof of purchase. The warranty covers all defects related to materials and manufacturing, but excludes any deterioration resulting from non-compliance with the instruction manual or user negligence (disassembly, exposure to heat or humidity, etc.). It is recommended to keep the packaging for future reference.
In an effort to improve our services, we regularly make modifications to the colors and certain details of the product shown on the packaging.
REMINDER: Keep this instruction manual as it contains important information.
Reference: RP500TS
Designed and developed in Europe – Made in China
© 2010 Lexibook®
© Disney/Pixar
Lexibook S.A
2, avenue de Scandinavie
91953 Courtaboeuf Cedex
France
Consumer service contact: 0892 23 27 26 (0.34€ TTC/min)
www.lexibook.com
Information on environmental protection:
This product is not a toy. All used electrical equipment is recyclable material and should not be part of household waste! We ask for your support in contributing to resource management and environmental protection by depositing this appliance at collection sites (if available).
CE Marking ?