Canyon CNE-CHS01 Stereo PC Headset - Quick Guide
Your essential guide to setup, features, and troubleshooting for the Canyon CNE-CHS01 Stereo PC Headset.
Product Overview
The Canyon CNE-CHS01 is a Stereo PC Headset designed for clear audio and comfortable use, suitable for gaming, calls, and general multimedia applications.
Features
- Driver: 30 mm
- Frequency Range: 20-20000Hz
- Impedance: 32 Ohm
- Sensitivity: 105 dB ± 3 dB
- Integrated Volume control
Complete Set
- Stereo headset with microphone
- Ear cushions
- User manual
Connection and Control Unit
To connect your headset:
- Plug the headset's connector into the corresponding port on your device.
- When disconnecting the headset, grip the plug firmly and pull it straight out. Do not pull the cable.
Troubleshooting
Encountering issues? Try these solutions:
No Sound or Noise in Sound
If you experience no sound or distorted sound, please check the following:
- Verify all cable connections are secure.
- Check the sound settings on your tablet, telephone, or player.
- Ensure the mute function is not activated on your device or headset.
- Confirm the quality of the audio source and recording.
- Adjust the sound level using your device's settings.
If these steps do not resolve the problem, please contact Canyon support:
Safety Instructions & Warnings
Please read and follow all instructions before using this device:
- Protect the device from excessive moisture, water, and dust.
- Keep the device away from heat sources and direct sunlight. Do not install near heating devices.
- Clean the device only with a dry cloth. Never use liquid cleaners or spray cleaners.
Important Warnings:
- ? Using earphones at high volume levels for extended periods may cause temporary or permanent hearing loss.
- ⚠️ Do not attempt to disassemble or repair the device yourself, as this will void the warranty.
Warranty Information
The warranty period begins on the date of purchase from an authorized Canyon seller. The warranty is valid for 2 years from the date of purchase by the consumer.
For detailed warranty terms and conditions, please visit: