Note: When using the monitor for the first time, remove the battery insulation layer.
Battery Replacement
Remove the battery cover from the opening at the bottom of the monitor. Remove the depleted battery and install a CR2450 battery with the positive (+) side facing up, then securely reattach the cover.
Maintenance and Care
Please avoid getting water into the monitor during cleaning. When the monitor surface is dirty, it can be cleaned with a damp, soft cloth and a neutral detergent.
Safety Precautions
- The monitor is not waterproof; do not immerse its ventilation holes in water.
- Do not forcibly remove the monitor from the wall if an adhesive sticker is attached, to avoid damaging the wall or the monitor.
- The monitor is not suitable for use in environments with temperatures below 0°C.
- Avoid harsh environments with high temperatures or high humidity.
- Use the specified battery model for replacement and dispose of used batteries according to relevant national regulations.
- The monitor is intended to promote a healthy lifestyle and should not be used as a measuring instrument.
- The lifespan of the supplied battery is for trial use only and may not be the same as a standard new battery.
- Under normal usage conditions, there should be at least 20 cm distance between the device's antenna and the user's body.
Specifications
- Name: Xiaomi Smart Temperature and Humidity Monitor 3
- Model: MJWSD05MMC
- Material: ABS
- Dimensions: 79.6 x 70.2 x 14.5 mm
- Weight: 72 g
- Rated Voltage: 3 V =
- Maximum Power: 45 mW
- Battery Model: CR2450 (included)
- Connection: Bluetooth 5.0 Low Energy
- Temperature Measurement Range: 0°C to 60°C
- Temperature Resolution: 0.1°C
- Humidity Measurement Range: 0-99% RH
- Humidity Resolution: 1% RH
- Bluetooth Operating Frequency: 2402-2480 MHz
- Bluetooth Maximum Output Power: <13 dBm
The product nameplate is located on the back of the monitor's body.
The 8th to 10th digits of the SN code on the product and packaging represent the factory code.
Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may differ due to product improvements.
Regulatory Information
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. All product names, trademarks, and registered trademarks are property of their respective owners.
[Mi Logo] Xiaomi Miaomiaoce Technology (Beijing) Co., Ltd. hereby declares that the radio equipment type MJWSD05MMC is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
This symbol [WEEE Symbol] indicates that this product is waste electrical and electronic equipment (WEEE, as per Directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or the local authorities. Correct recycling will help prevent potential negative consequences for the environment and human health. Please contact the installer or local authorities for more information on the location and terms of such collection points.
Manufacturer and Importer
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Miaomiaoce Technology (Beijing) Co., Ltd. (A Mi Ecosystem Company)
Address: No. 1-Y1-06, 1F, Tower A, Innovation Building, No. 11, Heping East Street, Dongcheng District, Beijing, China
For more information, visit www.mi.com
Importer: Beryko s.r.o.
Address: Pod Vinicemi 931/2, 412 01 Litoměřice, Czech Republic. www.beryko.cz
