QuickZip X TV Mount & Shelf Assembly Instructions

A X TV Mount

ASSEMBLY INSTRUCTIONS

BOX CONTENTS

(1) X Mount Bracket
(1) Mount Clamp
(4) Spacers
(4) M4 x 12mm screws
(4) M4 x 30mm screws

Step 1: Install Mount Clamp

Attach the Mount Clamp to the desired mounting surface. The diagram shows the clamp being secured, with an arrow indicating insertion into a slot.

Diagram: A clamp mechanism being attached to a vertical surface.

Step 2: Attach X Mount to Monitor

Using the M4 screws provided, attach the X Mount Bracket to the back of the monitor. The diagram shows the bracket being screwed onto the monitor's VESA mounting points.

Diagram: The X Mount Bracket being screwed onto the back of a flat-screen monitor using four screws.

Step 3: Slide TV Onto Clamp

Carefully slide the monitor, with the attached X Mount Bracket, onto the installed Mount Clamp. The diagram shows the bracket sliding down onto the clamp mechanism.

Diagram: The monitor assembly sliding vertically onto the previously installed mount clamp.

B Display Shelf

ASSEMBLY INSTRUCTIONS

BOX CONTENTS

(1) Shelf
(1) Support Pole (2 Pieces)
(1) Modified Foot

Step 1: Install Modified Foot

Attach the Modified Foot to the base of the assembly. The diagram shows the foot being connected to the bottom of a pole or base structure.

Diagram: A foot component being attached to the base of a pole.

Step 2: Attach Poles to Feet

Connect the Support Poles to the Modified Foot. The diagram shows two poles being inserted into the foot component, with arrows indicating downward insertion.

Diagram: Two support poles being inserted into the modified foot.

Step 3: Install Shelves

Attach the Shelf to the Support Poles. The diagram shows the shelf being placed and secured onto the poles.

Diagram: The shelf being mounted onto the support poles.