User Manual for UNI-T models including: UT620A Digital Micro Ohm Meter, UT620A, Digital Micro Ohm Meter, Micro Ohm Meter, Ohm Meter, Meter
Uni-T UT620A Digital Micro Ohm Meter | Huddleston Australia
System Prerequisites
Interface software User Manual
Recommended configuration
Processor
Pentium® 4 or higher with support of all customary operating systems
Operating system Microsoft Windows® XP / Vista / Win7
Memory 512 MB RAM or higher
Monitor VGA (1024 x 768)
Drive CD-ROM
Input device Mouse or compatible
Interface USB
Install Software · Insert the provided CD disk into CD-ROM drive. · Double-click "XXX_VX.XX.exe" (X can be 0 to 9 or blank, indicating the software version) · The pop-up windows will guide you through the program setup process.
1/3
Main Screen
Interface software User Manual
Main display screen of measurement Secondary display screen for measurement Control buttons
2/3
Interface software User Manual Using Program Click "Connection" and is blinking indicates meter is successfully connected to the PC and meter will automatically start taking measurements. Primary display screen shows measurement, secondary display screen shows all measurement data.
Zoom grid Print data Save data (*.txt, *.xls, *.xml) Open files (*.txt, *.xls, *.xml) Repeat: Tick to display every measurement with the interval you set. Un-tick "Repeat", the secondary display screen will only show measurement result that is different from the last measured temperature. The graph display will show complete measurement result in graphics despite "Repeat" is ticked or un-ticked.
3/3
GPL Ghostscript 9.50