ATEN VE8662 True 4K HDMI H.265 over IP Transceiver with PoE
Model: VE8662
Introduction
The ATEN VE8662 is a True 4K HDMI H.265 over IP Transceiver with PoE support, integrating transmitter and receiver functions into a single device for flexible and easy A/V solution deployment.
Key Features
- Advanced H.265 compression for efficient video transmission with low latency.
- Supports True 4K resolution up to 3840 x 2160 @ 60Hz (4:4:4).
- Transmits HDMI video, audio, USB 2.0, and RS-232 signals up to 100 meters over a single Ethernet cable.
- Built-in error correction minimizes latency and bandwidth usage.
- Supports audio embedding and de-embedding.
- EDID Expert™ for optimal display settings.
- HDR 10 and HDCP 2.3/2.2 compliance.
- PoE (Power over Ethernet) and DC power input for redundant power supply.
- Scalable for one-to-one or multi-point configurations.
- Built-in 8KV/15KV ESD protection.
- Rack-mountable design.
- Seamless integration with ATEN Control Systems.
- Easy IP configuration without complex network knowledge.
- Intuitive Web-based GUI for management and monitoring.
- Supports video wall configurations.
- Real-time scheduling management.
- Robust security features including SRTP and HTTPS.
Diagrams and Visual Descriptions
Front and Rear Views
Front View: Features an LCD screen and three pushbuttons for operation mode selection and control.
Rear View (Transmitter/Receiver): Includes ports for HDMI input/output, RS-232, USB (Host on Tx, Device on Rx), LAN (RJ-45), Audio (Mini Stereo Jack), DC 12V power input, and PoE (RJ-45).
System Diagram
The system diagram illustrates a typical setup where ATEN VE8662 Transmitters (Tx) connect to video sources (e.g., Blu-ray player, media player). These Tx units connect via a PoE-enabled network switch to ATEN VE8662 Receivers (Rx). The Rx units then connect to displays (e.g., Monitor, TV, Video Wall). An ATEN Control Box (VK2200/VK1200) is also connected to the network switch, enabling centralized control via Web GUI or other ATEN control interfaces. The diagram highlights that PoE support eliminates the need for separate power cables for the VE8662 units when used with a PoE network switch.
IP Configuration Interface Example
An example interface shows a simple IP configuration screen with options for setting IP address, Rx ID, Video, System, and Channel. It also displays the HDMI output status and a button to unlock settings. A DIP switch is shown with 'T' (Transmitter) and 'R' (Receiver) labels.
Web GUI Interface Example
A screenshot of the ATEN VE Manager Web GUI demonstrates its capabilities, including a preview of video feeds, device status, and options for creating video walls, managing workstations, and configuring profiles. It shows a drag-and-drop interface for assigning sources to displays.
Applications
The VE8662 is ideal for environments requiring high-quality video distribution, such as broadcast studios, entertainment venues, sports centers, smart buildings, and for extending video signals between different buildings.
Product Specifications
| Feature | Specification |
|---|---|
| Video Input | 1 x HDMI Type A Female (Black) |
| Max. Distance (Internal) | 5m |
| Impedance | 100 Ω |
| Interface (Video Input) | 1 x HDMI Type A Female (Black) |
| Video Output | 1 x HDMI Type A Female (Black) |
| Interface (Video Output) | 1 x HDMI Type A Female (Black) |
| Impedance (Video Output) | 100 Ω |
| Max. Distance (Internal) | 5m |
| Video Max. Transfer Rate | Average: 20~25 Mbps |
| Compliance | HDMI, HDCP2.3 & HDCP2.2 Compatible |
| Max. Resolution/Distance | Up to True 4K@100m (Cat 5e/6, point to point) *True 4K supported: 3840 x 2160 @ 60Hz (4:4:4) |
| Video Compression | H.265 Codec |
| Latency | 3~5 frames |
| Audio Input | 1 x HDMI Type A Female (Black) / 1 x Mini Stereo Jack Female (Green) |
| Audio Output | 1 x HDMI Type A Female (Black) / 1 x Mini Stereo Jack Female (Green) |
| Connector (Network) | 1 x RJ-45 Female (with PoE) |
| Power | 1 x DC Jack (Black) with locking or 1 x RJ-45 (Power over Ethernet, PoE) |
| Control (RS-232) | Connector: 1 x Terminal Block, 3 pole / Baud Rate: 19200, Data Bits:8 / Stop Bits: 1, no parity and flow control |
| USB Channel | 1 x USB Type-B Female (Host) / 2 x USB Type-A Female (Device) |
| Push Button | 3 x Pushbuttons for LCM operation |
| Operation Mode Selection Switch | 1 x Slide Switch - T (Be a Transmitter) / R (Be a Receiver) selection |
| LEDs | 1 x DC in LED (Green) / 1 x PoE LED (Green) |
| Power Consumption | DC12V: 4.79W / DC12V: 4.98W |
| Operating Temperature | 0-40°C |
| Storage Temperature | -20-60°C |
| Humidity | 0-80% RH, Non-Condensing |
| Material | Metal |
| Weight | 0.51 kg |
| Dimensions (L x W x H) with bracket | 14.02 x 12.30 x 3.00 cm |
| Dimensions (L x W x H) without bracket | 13.60 x 10.10 x 2.90 cm |
