User Guide for UBIQUITI models including: USW-48-POE Gigabit Managed PoE Network Switch, USW-48-POE, Gigabit Managed PoE Network Switch
Ubiquiti UniFi USW-48-POE
Do not place anything on top of this UniFi. Switch. 1. 2. OR. USW-48-POE Quick Start Guide ...
USW-48-POE Quick Start Guide Package Contents UniFi Switch Rack-Mount Brackets (Qty. 2) Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cord System Requirements Linux, Mac OS X, or Microsoft Windows 7/8/10 Java Runtime Environment 1.6 (1.8 or newer recommended) Web Browser: Google Chrome (Other browsers may have limited functionality.) UniFi Controller software v5.12.x (or newer), available at: ui.com/download/unifi IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power. Hardware Overview LEDs Touchscreen Display Bootup Animation Steady White Initializing. Factory defaults, waiting for adoption. Steady Blue USWS-4u8c-cPeOssEfuQllyuaicdkoSptteadrtbGyuaidneetwork and working properly. Location Animation This indicates that you clicked Locate in the UniFi Controller software. The software will also display the location of the device on the map. RJ45 PoE LED (Ports 1 - 32) Off No PoE Amber 802.3af/at PoE RJ45 Speed/Link/Activity LED (Ports 1 - 48) Off No Link Amber Link Established at 10/100 Mbps Flashing Indicates Activity Green Link Established at 1000 Mbps Flashing Indicates Activity SFP Speed/Link/Activity LED (Ports 49 - 52) Off No Link Green Link Established at 1 Gbps Flashing Indicates Activity RJ45 (Ports 1 - 32) RJ45 ports support 10/100/1000 Ethernet connections and 802.3af/at PoE output. RJ45 (Ports 33 - 48) RJ45 ports support 10/100/1000 Ethernet connections. SFP (Ports 49 - 52) Hot-swappable SFP ports support 1 Gbps connections. Reset Button This button serves two functions for the UniFi Switch: Restart Press and release the Reset button quickly. Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. Power Port Connect the included Power Cord to the Power port. Installation Requirements Phillips screwdriver Standard-sized, 19" wide rack with a minimum of 1U height available For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use. For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply. We and recommend that destructive ESD yeovueUnpStrsoWtwe-i4ctht8y-inPoduOurEsnterQitawul-oigcrrkkasdSfetra,orsmthGiheauldridmeedfuEl tohuetrdnoeotrceanbvleirofrnomments Ubiquiti. For more details, visit: ui.com/toughcable Note: Although the cabling can be located outdoors, the UniFi Switch itself should be housed inside a protective enclosure. Hardware Installation IMPORTANT: Fanless switches must not be stacked. Do not place this UniFi Switch on top of another switch. Do not place anything on top of this UniFi Switch. 1. 2. OR USW-48-POE Quick Start Guide Connecting Power 1. 2. USW-48-POE Quick Start Guide Connecting Ethernet Note: If you are connecting PoE devices, check the display to see how much PoE wattage is available. Connecting SFP 1. 2. USW-48-POE Quick Start Guide 3. For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility Software Installation Download and install the latest version of the UniFi Controller software at ui.com/download/unifi and follow the on-screen instructions. Note: If you already have UniFi Controller v5.12.x or newer installed, skip to "Adopting the UniFi Switch". After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the admin name and password that you created and click Sign In. USW-48-POE Quick Start Guide You can manage your network and view network statistics using the UniFi Controller management interface. To adopt the UniFi Switch, proceed to "Adopting the UniFi Switch". For information on configuring and using the UniFi Controller software, refer to the User Guide on the website: ui.com/download/unifi Adopting the UniFi Switch 1. From the UniFi Controller dashboard, click Devices in the left menu bar. 2. On the Devices screen, locate the UniFi Switch in the list of devices under the Model column. To adopt the UniFi Switch, click Adopt. 3. The display will turn blueUtSoWco-n4f8ir-mPOthEatQituhicaks Sbetaernt sGuucicdeessfully adopted. Specifications Dimensions Weight With Rackmount Brackets Interfaces Networking Management Power Method Power Supply Supported Voltage Range Max. Power Consumption (Excluding PoE Output) LEDs RJ45 Data Ports SFP Data Ports ESD/EMP Protection Shock and Vibration Operating Temperature Operating Humidity Certifications USW-48-POE 442.4 x 285 x 43.7 mm (17.42 x 11.22 x 1.72") 4.52 kg (9.97 lb) 4.61 kg (10.16 lb) (48) 10/100/1000 RJ45 Ports (4) 1G SFP Ethernet Ports Ethernet In-Band 100-240VAC, 50/60 Hz, Universal Input AC/DC, Internal, 240W 100 to 240VAC 45W PoE; Speed/Link/Activity Link/Activity Air: ± 16 kV, Contact: ± 12 kV ETSI300-019-1.4 Standard -5 to 40° C (23 to 104° F) 10 to 90% Noncondensing CE, FCC, IC PoE PoE Interfaces Ports 1-32 Max. PoE Wattage per Port by PSE 802.3at Voltage Range 802.3af Mode Voltage Range 802.3at Mode POE+ IEEE 802.3af/at (Pins 1, 2+; 3, 6-) 32W 44-57V 50-57V Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different power source than those specified may result in improper not followed. operationU, dSaWma-4ge8-toPtOheEeQquuipicmkeSnttoarrtpoGsueida efire hazard if the limitations are 2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician. 3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet. a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire. b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death. c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment. d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection. e. Protective bonding must be installed in accordance with local national wiring rules and regulations. Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ISED Canada CAN ICES-3(A)/NMB-3(A) Australia and New Zealand Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. WEEE Compliance Statement Declaration of Conformity Online ResourcesUSW-48-POE Quick Start Guide © 2021 Ubiquiti Inc. All rights reserved.Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/92.0.4515.107 Safari/537.36 Skia/PDF m92