Deep Sea Electronics
Manual-Hub.com - Free English product PDF Documents!
Instruction Manual for DSE models including: DSE9476 24 V 20 A Battery Charger, DSE9476, 24 V 20 A Battery Charger, A Battery Charger, Battery Charger, Charger
DEEP SEA ELECTRONICS DSE9476 (01) PDF MANUAL - MANUAL-HUB.COM
File Info : application/pdf, 2 Pages, 721.54KB
DocumentDocumentDEEP SEA ELECTRONICS DSE9476: 24 V, 20 A Battery Charger Installation Instructions 053-235 ISSUE 1 DANGER OF DEATH: LIVE PARTS exist within the DSE9476 enclosure. The enclosure cover must not be removed. INSTALLATION The DSE9476 is a 24 V, 20 A battery charger which is designed to be mounted within a control panel, utilising the integral mounting holes. The DSE9476 battery charger is fit-and-forget. It may be permanently connected to the A.C. supply and the load, with no requirement to disable the charger during times of heavy load (such as engine cranking) or when in parallel with a charging alternator. BATTERY SUITABILITY The charger is factory set by DSE to suit Lead Acid batteries, configuration is possible to suit other battery types using the DSE Configuraiton Suite PC Software which is available from www.deepseaplc.com. Care must be taken to ensure the batteries connected to the charger are of the correct `technology' to suit the setting of the charger. INDICATIONS The DSE9476 Battery Charger features LED indicators to show the battery charger status. DIMENSIONS AND MOUNTING Parameter Specification Case Dimensions 248 mm x 183 mm x 76 mm (9.74 " x 7.19 " x 3.00 ") Mounting Holes Suitable for M5 Dimensions (0.23 " diameter) Mounting Hole Spacings 233 mm x 150 mm (9.17 " x 5.91 ") NOTE: The DSE9476 battery charger is designed to be mounted with the base to a vertical surface with the terminal strips at the bottom. NOTE: This document is intended as a `quick start' guide only. For full operating instructions and specifications, refer to DSE publication: 057-282 DSE9476 Operator Manual. https://manual-hub.com/ TYPICAL CONNECTION DIAGRAM Parameter Connection Type Min Cable Size (AC Supply) Min Cable Size (Charge Output) Min Cable Size (All Other Connections) Max Cable Size (AC Supply) Max Cable Size (All Other Connections) Recommended AC Fuse Specification Screw terminal, rising clamp, no internal spring 2.0 mm² (AWG 15) 1.0 mm² (AWG 18) 0.5 mm² (AWG 20) 3.3 mm² (AWG 12) 2.5 mm² (AWG 14) 230 V AC Input 110 V AC Input 5.0 A anti-surge 10.0 A anti-surge Deep Sea Electronics Plc. Tel: +44 (0)1723 890099 Fax: +44 (0)1723 893303 Email: sales@deepseaplc.com Web: www.deepseaplc.com Deep Sea Electronics Inc. Phone: +1 (815) 316-8706 Fax: +1 (815) 316- 8708 Email: sales@deepseausa.com Web: www.deepseausa.com https://manual-hub.com/