Philips Multigroom Series 3000 User Manual & Safety Guide

Important Safety Information

Please read this important information carefully before using the product, its batteries, and accessories. Misuse can lead to hazards or serious injuries.

General Use & Warnings

• Use the product only for its intended household purpose.
• Keep the product, USB cable, and USB supply unit dry. ?
• Combs and cutting units can be rinsed under the tap if detached from the appliance.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they are supervised or instructed on safe use and understand the hazards.
• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Do not modify the supply unit.
• Do not use the supply unit in or near wall sockets containing an electric air freshener to prevent irreparable damage.
• Do not use a damaged appliance. Replace damaged parts with new Philips parts.
• For hygiene reasons, only one person should use the appliance.
• Never use compressed air, scouring pads, abrasive cleaning agents, or aggressive liquids to clean the appliance.
• Maximum sound power level: Lc = 69 dB(A).
• Only use original Philips accessories or consumables.
• Charge, use, and store the product at a temperature between 10°C and 35°C.
• Keep product and batteries away from fire ? and do not expose them to direct sunlight or high temperatures.
• If the product becomes abnormally hot, smelly, changes color, or charging takes longer than usual, stop using and charging, and contact Philips.
• Do not place products and their batteries in microwave ovens or on induction cookers.

Battery Safety

• Do not open, modify, pierce, damage, or dismantle the product or battery to prevent overheating or release of toxic/hazardous substances.
• Do not short-circuit, overcharge, or reverse charge batteries.
• If batteries are damaged or leaking, avoid contact with skin or eyes. If contact occurs, rinse well with water and seek medical care.

Diagram Descriptions

The diagrams illustrate the following:

• Model Identification: Shows the Philips logo and lists model numbers MG3915, MG3920, MG3930, MG3935, MG3940, MG3945, MG3946.
• Comb Lengths: Illustrates the different comb attachments and their corresponding lengths (e.g., 1mm, 2mm, 3mm, 5mm, 7mm, 9mm, 12mm, 16mm).
• Charging: Shows the trimmer being connected to a USB power source, with indicators for charging time (e.g., 60 min, 70 min, 90 min). ??
• Usage: Demonstrates how to attach combs to the trimmer and how to use the trimmer for grooming (e.g., beard, hair).
• Cleaning: Illustrates rinsing the trimmer head and combs under running water. ?

Electromagnetic Fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Support

For product support, power consumption details, and the EU Declaration of Conformity, please visit www.philips.com/support.

Recycling

This symbol ♻️ means that electrical products and batteries shall not be disposed of with normal household waste. Follow your country's rules for the separate collection of electrical products and batteries.

Removal of Built-in Rechargeable Battery

The built-in rechargeable battery must only be removed by a qualified professional when the appliance is discarded. Before removing the battery, ensure the appliance is disconnected from the wall socket and the battery is completely empty.

• Take necessary safety precautions ✋ when handling tools ?️ to open the appliance and dispose of the battery.
• Ensure hands, product, and batteries are dry when handling batteries.
• To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g., coins, hairpins, rings). Do not wrap batteries in aluminum foil. Tape battery terminals or put batteries in a plastic bag before discarding them.

Steps for Battery Removal:

1. Check for screws in the appliance housing and remove them.
2. Remove any additional screws, panels, or parts until the printed circuit board with the rechargeable battery is visible.
3. Remove the rechargeable battery.