MIBOXER Mi-Light LED Controllers
Dual White LED Controller (Model No.: FUT035S)
Single Color LED Controller (Model No.: FUT036S)
Features
These controllers utilize widely adopted 2.4GHz wireless technology, offering low power consumption, long signal transmission, and strong anti-interference capabilities. They feature auto-transmitting and auto-synchronizing functions, making them suitable for hotel and home lighting applications.
Controller dimensions: Approximately 74.5mm length, 36mm width, and 17mm height.
- Color temperature adjustable ?
- Dimmable control ?
- 2.4G RF wireless transmission technology ?
- Remote control: 30m range ?
- Smart phone APP control (requires 2.4GHz gateway) ?
- Support third-party voice control (requires 2.4GHz gateway) ?️
Dual White LED Controller (FUT035S)
Model No.: FUT035S
Working Voltage: DC12V~24V
Output: 12A/Channel
Total Output: Max 12A
Output Connection: Common anode
RF: 2.4GHz
Max Controlling Distance: 30m
Working Temperature: -10~40°C
Input Terminals: V-, V+ (DC12V/24V)
Output Terminals: V+, CW, WW, V- (for connecting LED strips)
Single Color LED Controller (FUT036S)
Model No.: FUT036S
Working Voltage: DC12V~24V
Output: Max 12A
Output Connection: Common anode
RF: 2.4GHz
Max Controlling Distance: 30m
Working Temperature: -10~40°C
Input Terminals: V-, V+ (DC12V/24V)
Output Terminals: LED V+, LED V- (for connecting LED strips)
Signal Transmitting & Range Extension
A single strip controller can relay signals from a remote control to another controller within a 30m range. If there are multiple controllers within 30m of each other, the effective remote control distance can become limitless, creating a mesh network for extended coverage.
Signal transmitting: Controller (30m range) -> Controller -> ...
Link/Unlink with Remote Controls
These controllers are compatible with various Mi-Light remote controls, such as FUT006, FUT007, and FUT087 (sold separately). Linking allows the remote to control the connected LED system.
A 2.4GHz gateway (Model No.: WL-Box1) is required for smart phone APP control and third-party voice assistant integration (e.g., Amazon Alexa, Google Assistant).
Note: Lights will function after successful linking with a remote control. Refer to the remote control's instruction manual for detailed linking procedures.
PWM High Frequency / Low Frequency Switching
To switch to High Frequency (8KHz):
- With the light on, short press the "OFF" button on the remote control once.
- Within 3 seconds, short press the "ON" button five times. The white light will blink twice quickly, confirming the change.
To switch to Low Frequency (500Hz):
- With the light off, short press the "ON" button on the remote control once.
- Within 3 seconds, short press the "OFF" button five times. The white light will blink twice slowly, confirming the change.
Attention & Safety Precautions
- Verify that the power supply voltage matches the controller's requirements. Ensure correct connection of both positive (+) and negative (-) terminals to prevent damage.
- Never connect or disconnect wires while the power is on. Ensure correct wiring and no short circuits before powering up.
- Avoid using the controller in areas with large metal structures or strong electromagnetic interference, as this can significantly reduce the remote control's effective range.
- Controller is not suitable for humid environments. ?❌
