BowerUSA Consumer Photography Accessories and Electron
User Manual for BOWER USA models including: WA-DUALCLP, WA-DUALCLP Dual Sided Clip On Light With Camera Mount, Dual Sided Clip On Light With Camera Mount, Sided Clip On Light With Camera Mount, Clip On Light With Camera Mount, Light With Camera Mount, Camera Mount, Mount
User Manuals
Dual Sided Clip on Light with Camera Mount
File Info : application/pdf, 1 Pages, 18.79MB
DocumentDocumentUSER MANUAL IN THE BOX: DUAL-SIDED CLIP-ON LIGHT WITH CAMERA MOUNT Dual-sided Clip-on Light USB-C Charging Cable PRODUCT PARTS: 1 2 6 7 5 8 9 3 FRONT 4 BACK 1) Smooth Light 2) Diamond Crystal Light 3) Clip-on Mount 4) Clip-on Mount Button 5) USB-C Charging Port 6) RGB Mode Button 7) White Light Mode Button 8) Cold Shoe Mount 9) Camera Hole HOW TO USE: Turn on/off light: Press and hold the W button (long press) to turn on the device when the light is off. When the light is on, press and hold the W button (long press) to shut it off; This product has the function of lamp memory. Every time the ligh is turned on, it will open to the same state when the light was turned off. Switching between RGB and White Light Mode: When the RGB mode is on(R button), press W button (short press) to switch to White light mode. Once in White Light Mode, press W button repeatedly(short press) to change White Light Modes (warm, natural, white). In White Light Mode, press the R button (short press) to switch to RGB Mode; When the RGB mode is on, press the R button repeatedly (short press) to change between RGB colors and Special Effects. Switching between front/back light & dual lighting: The device has the ability to have either front or back light powered on, as well as both sides powered on simultaneously. When the light is powered on, press and hold the R button (long press) to switch between (front - back - double side). Repeat this step until desired choice appears. HOW TO USE: Charging the device: Use provided USB-C charging cable and connect USB-C end into device and USB-A end into any USB port such as on a computer USB port, wall charger USB port, portable power bank USB port. When this product is charging, the red light is steadily on; When fully charged, the red light goes out. When the red light blinks the battery is empty and needs to be recharged. Mounting on to a camera: Simply slide out light from Clip-mount and insert into camera hot-shoe mount. HOW TO USE: Mounting on to a monitor, phone, tablet: Push in Clip-on Mount Button to open clip and attach to your device. Clip opens up to 0.57 in. (max). Specifications: Power: 4W Input: Type-C interface 5V/1.0A Power supply: Built-in 3.7V Lithium Battery Lithium battery capacity: 500mAh LED light beads qty: 40 Light beads type: 5050 Lamp Bead Luminous angle: 120° Protection level IP: IP20 Continuous lighting time: Up to 40 minutes Charging time: About 2 hrs Color temperature: 3000-7000k 3 White Light Modes, 6 RGB Colors, 6 Special Effect Modes Size: 3.6 in.(width) x 5 in.(height) x 1.9 in.(depth) LIMITED One (1) Year Limited Warranty S. Bower Inc.TM One (1) Year Limited Warranty: This warranty gives you specific legal rights and you may have other rights which vary from state to state. The S. Bower Inc.TM Limited Warranty is a voluntary manufacturer's warranty provided to the consumer. This warranty provides rights separate to rights provided by consumer law, including but not limited to those relating to non-conforming goods. S. Bower Inc.TM One-Year Limited Warranty benefits are in addition to, and not instead of, rights provided by consumer law and it does not exclude, limit or suspend a buyer's rights arising from consumer law. Consumers have the right to choose whether to claim service under the S. Bower Inc.TM One-Year Limited Warranty or under their consumer law rights. The S. Bower Inc.TM One-Year Limited Warranty terms and conditions shall not apply to consumer law claims, contact your local consumer organization. Please note: All claims made under the S. Bower Inc.TM One-Year Limited Warranty will be governed by the terms set out in this warranty document. S. Bower Inc.TM warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase when used in accordance with S. Bower Inc.TM 's user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.TM, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S. Bower Inc.TM sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc.TM sole discretion. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than S. Bower Inc.TM personnel. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer's policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to send the product (prepaid freight) to S. Bower Inc.TM corporate offices located at S. Bower Inc. 38-09 43rd Avenue 1st Floor Long Island City, NY 11101 for repair or replacement at S. Bower Inc.TM 's option. Proof of purchase is required. Include name, return address, and issues that you are experiencing with S. Bower Inc.TM products. All other guarantees, express or implied, are hereby disclaimed. This warranty does not apply to products sold in countries sold out of the United States. ©2023 S. Bower, Inc. All rights reserved. All brand names and trademarks belong to their respective owners S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com