Owner's Manual for Xsense models including: RTL 2G, RTL 2G Datalogger for Real-Time Monitoring, Datalogger for Real-Time Monitoring, Real-Time Monitoring, Monitoring
XSENSE Ltd. XSENSE-RTL 2BG8G-XSENSE-RTL 2BG8GXSENSERTL xsense rtl
www.sense.co Xsense® RTL 2G & Cat-M1(4G/5G) Datalogger for Real-Time Monitoring Introduction The Xsense® 2G & Cat-M1(4G/5G) datalogger is a compact device for real-time monitoring built for today's world. It was designed from the ground up to use a non-lithium battery, and it supports easy battery replacement by the user, as per EU standards, for extended use or reuse. Temperature, relative humidity, light, shock/acceleration, and barometric pressure sensors are currently offered, with many additional sensors and extensions planned for the future. Some novel features are: Ability to manually force test cellular connectivity Optional BLE access for reconfiguring device or offloading readings Optional USB-C power port for powering unit for extended use or as an emergency power source It is simple to use. Register your device in Xsense®. Turn it on. And place it wherever you want (within range of a cellular signal) to get live measures of environmental and location information. It comes with a cellular SIM card pre-installed. The datalogger comes with access to Xsense® Cloud which includes such features as: Route tracing and trip segmentation Automatic alerts Automatic notifications at destination and waypoints Arrival time estimations Smart data access security Quality metrics In-app messaging and alerts (Android and iOS) Post-analysis reports Stay informed anywhere, anytime. Applications One-way shipments Round-Trip shipments Last mile Fixed location monitoring Asset tracking Xsense® Ltd. Dolev 33, Migdal Tefen, Israel 2495900 Device Specifications Cellular Network SIM Card Battery Type Operating Options Certified Modes of Transport Operating Life Operating Temperature Range Transmission Interval Logging Interval Memory Capacity (Offline Logger) Secondary Communication Channel Alternative Power Source Regulatory Certifications Storage Conditions Dimensions Weight Patents LTE Cat-M1 (4G) & 2G Pre-installed global nano SIM card Non-Rechargeable Single Use / Reusable Air, Road, Rail, Ocean Up to 18 days (15-minute reporting interval) Up to 35 days (30-minute reporting interval) Up to 70 days (1-hour reporting interval) -30°C to +60°C Configurable, 5 to 120 minutes Configurable, 1 to 120 minutes 12,000 readings Bluetooth BLE 5.2 via Xsense® Mobile App Standard USB-C Cable (Cable Output: 5V/1A) FCC; CE; RTCA/DO-160 - Pending Temperature: +10°C to +35°C 97 mm x 111 mm x 29 mm 3.8 in x 4.37 in x 1.14 in Up to 240 g / 8.5 oz Pending www.sense.co Xsense® Ltd. Dolev 33, Migdal Tefen, Israel 2495900 www.sense.co Sensors Sensor Temperature (TB) Relative Humidity (RH) Light Range / Accuracy Precision ± 0.2°C (from 0°C to 60°C) / ± 0.3°C (under 0°C) ± 0.36°F (from 32°F to 140°F) / ± 0.54°F (under 32°F) ± 3% (from 0 to 85%) / ± 4% (from 85 to 100%) 0.1°C / 0.18°F 1% 0.01 to 157,000 Lux (±10%) Door open > 15 Lux ??? Calibration Factory calibrated (NIST) Factory calibrated (NIST) Factory calibrated FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. WARNING RF EXPOSURE COMPLIANCE: This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. -This Class B digital apparatus complies with Canadian ICES-003. -Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. IC Statements This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. AVERTISSEMENT CONFORMITÉ AUX NORMES D'EXPOSITION AUX RF : Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps. Xsense® Ltd. Dolev 33, Migdal Tefen, Israel 2495900Microsoft: Print To PDF