Samsung Galaxy Watch Active2 Internal Photographs
FCC ID: A3LSMR825
Revision History
The revision history for this document is shown in the table below.
Revision No. | Date of Issue | Description |
---|---|---|
0 | Jul. 26, 2019 | Initial Release |
1. NFC & Bluetooth & WLAN Antenna Internal Photo
This section shows the internal placement of the NFC, Bluetooth, and WLAN antennas. The NFC antenna is labeled, as are the BT/WLAN Antenna Tx/Rx.
2. Internal Photo
This section provides an internal view of the device, showing the main circuit board and other components.
3. Internal Photo
This section displays another internal view of the smartwatch, highlighting the arrangement of electronic components.
4. Internal Photo
This photograph shows the internal components, including a separated circuit board and the battery compartment.
5. Internal Photo
This image focuses on the internal components, particularly the battery and its connections within the device.
Battery Details:
- Secondary Li-ion Battery
- Nominal Voltage: 3.85V
- Charge Voltage: 4.4V
- Rated Capacity: 330 mAh (1.27 Wh)
- Typical Capacity: 340 mAh (1.30 Wh)
- Model: EB-BR820ABY
6. Internal Photo
This section presents an internal view of the smartwatch, showcasing the circuit board and its integrated components.
7. Internal Photo
This photograph details the secondary Li-ion battery, including its specifications and model number.
Battery Details:
- Secondary Li-ion Battery
- Nominal Voltage: 3.85V
- Charge Voltage: 4.4V
- Rated Capacity: 330 mAh (1.27 Wh)
- Typical Capacity: 340 mAh (1.30 Wh)
- Model: EB-BR820ABY
8. Internal Photo
This image displays the main circuit board of the smartwatch, with various integrated chips and connectors visible.
9. Internal Photo
This photograph shows a close-up of the main circuit board, revealing detailed electronic components and markings.