Ardo Medical Glass Bottle

Contact Information

Ardo medical AG
Gewerbestrasse 19
6314 Unterägeri
Switzerland

T: +41 (0)41 754 70 70
F: +41 (0)41 754 70 71
E: info@ardo.ch
W: www.ardomedical.com

Purpose

For the collection and storage of breast milk.

How to Use

Expressing Breast Milk

Connect the glass bottle to an original Ardo Pumpset (refer to separate Instruction leaflet).

Storage of Breast Milk

Seal the glass bottle with the provided lid. Breast milk can be stored as follows:

• At room temperature: up to 4 hours at 25°C (77°F)
• In the refrigerator: up to 4 days at 4°C (40°F)
• In the freezer compartment with door: 6 months to 1 year at -18°C (0°F)

Cleaning

Before first use and after each subsequent use:

1. Dismantle the product into its individual parts.
2. Rinse for at least 1 minute using cold tap water.
3. Clean the bottle components with commercial detergent and warm water (not exceeding +40°C / 104°F), and rinse with cold tap water. Ensure all detergent residues are removed.
4. A soft brush can be used for heavy soiling.
5. Allow all parts to air dry on a clean surface.

The product can also be cleaned in a dishwasher.

Disinfection

Perform once daily after manual cleaning:

1. Ensure sufficient water in the pot to prevent damage or deformation.
2. Boil the parts for 5 minutes.
3. Allow the parts to cool down and dry on a clean surface.

Alternatively, the product can be disinfected in the microwave using a microwave bag (e.g., Ardo Easy Clean). The product is also suitable for steam sterilization.

After each cleaning and disinfection process, check individual parts for cracks and surface changes. If any changes are detected, discard the affected part and use a new one.

Material

• Glass
• Polypropylene

Disposal

All parts must be disposed of in accordance with local regulations.