Intelbras ZEUS OS / INC CLOUD Integration User Guide

Objective

This document demonstrates the process of adopting legacy INTELBRAS products into the INC CLOUD manager, as well as displaying the available configurations in the integration with this manager.

Supported Products

The following products are ready to be adopted in the INC CLOUD manager:

• AP310
• AP1250AC-OUT
• AP1350AC-S
• AP3000AX
• AP360
• AP1250AC-MAX
• AP1750AC
• AP300AX-OUT
• AP1210AC
• AP1350AC
• AP1800AX

Supported Features

The following INC CLOUD features have been released for legacy INTELBRAS devices:

• SSID - WiFi network name.
• WiFi network activation / deactivation.
• VLAN in WiFi network.
• Hide WiFi network.
• Radio type: 2.4GHz, 5GHz, and DUAL BAND only.
• Encryption: PSK and Disabled.
• Client isolation.
• QoS – Traffic limit per WiFi.
• WiFi access blocking by MAC.
• Consultation of connected client statistics.
• Enable SSH access to legacy products.
• Bandwidth and channel.
• Firmware update.

Legacy Device Preparation for INC CLOUD Adoption

To adopt the device in INC CLOUD, you must:

1. Update the device to version 4.4.108 (or the latest).
2. Perform a factory reset.

Note: Access the Intelbras website to check the latest firmware version for integration of legacy devices with INC CLOUD.

Access WEB ZEUS OS – System > Firmware Update screen. Select version 4.4.108 and click “Update”.

The process will occur, and the AP will restart.

After a complete restart, access the WEB interface again and restore the product to factory default. Screen: “System > Backup and restore” - “Restore settings” option.

Note: It is highly recommended to perform the product reset to factory default before adopting it in INC CLOUD.

Product Registration and Adoption

Access the site https://inccloud.intelbras.com.br/ and register a new user by accessing the “Register” option on the login screen.

Note: If necessary, access this video to learn how to create your account in INC CLOUD.

Fill in the fields and register via email message.

After logging in, create a site in “Network > Organization” and select the “Add” option in the “Site Management” section.

Proceed to the “Site Name” step and enter the name. Proceed until completion.

Select the “Network > Sites” option and click on “Add device”.

Enter the device name. In the “SN” field, enter the device's MAC address and select the model from the selection list in the blue link.

Select the product model being registered and click “Add device”.

The entered MAC address will be converted into a larger number, the “SN” - Serial Number.

IMPORTANT: The “SN” is formed by 22 characters: the first 10 characters contain the product identifier, and the last 12 characters are the product's MAC address.

Here is the list of all product identifiers supported for ZEUS-INCCLOUD integration:

Note: It is possible to register a product by simply entering its name and SN (“identifier + product MAC”). In this case, it is not necessary to select the product from the list; just click “Add device” to register the product.

After adoption, the product registration is displayed in “Device Information”. It is possible to view, among other things, the connection status with INCCLOUD, the link for product information, and the version.

Available Configurations

Configurations available in the integration of Intelbras legacy products:

SSID Configurations

• Frequencies: 2.4GHz, 5GHz, DUALBAND
• Open and WPA PSK Encryption
• VLAN
• Hide SSID
• Disable SSID
• Isolate clients
• QoS per SSID
• WACL - WiFi access blocking by MAC.

Product Configuration

• Enable SSH access
• Restart product
• Migrate product site
• Firmware update

Radio Configuration

• Bandwidth
• Change channel.

Connected Clients

• Connected client information
• Number of connected clients
• Connected client traffic

SSID Configuration

Access “Network > Settings > APs Cloud” and select the “WLAN Settings” option.

Note: On the first access to WLAN configuration, you must save the region code - select the country and click “OK”.

In “Wi-Fi Settings”, you can change the previously created SSID. Just click the edit icon in “Actions”.

The following SSID configurations are listed:

• CSSID: SSID Name
• Wireless Service: SSID Activation / Deactivation
• Hide SSID: Hide SSID
• Radio Type: 2.4GHz and 5GHz only
• Encryption: PSK and Disabled only
• User Isolation: Isolate clients
• Client Rate Limit: QoS per SSID
• Filter Client MACs: blocking by MAC. MAC registration is done on another screen.

MAC Configuration – WACL

Add MACs and registration description.

Radio configuration is in “Settings > APs Cloud > Radio Settings”. To edit, click the edit icon in the “Actions” section.

The available options for editing are: “Mode”, “Band”, and “Channel”.

Consult Connected Clients

Access the options in “Settings > Client Statistics”.

Enable SSH Access

SSH access for all site products.

Access “Settings > APs Cloud and Login”.

Enable SSH and click “OK”.

Firmware Update

The only available update option is “Private Versions”. Upload the version in “Maintenance > Private Versions > Version Upload”.

To choose the version to update, access “Maintenance > Update”. On the product line, select the version in the “Software Update Version” column.

Select the product and click “Update”.

Observations

• It is possible to access the device's WEB interface while the product is adopted in INCCLOUD. However, it is highly recommended NOT TO MAKE CONFIGURATION CHANGES WHILE THE AP IS ADOPTED IN INCCLOUD. Configurations will become out of sync.
• The integration with the manager is constantly evolving, and more functionalities will be added over time.