Geeni Smart Wi-Fi LED Strip Start Guide

Getting Started

Thank you for purchasing your GEENI smart home product. Get started using your new devices by downloading the Geeni app, a convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi and control multiple devices from the touch of your fingertips.

Download the Geeni App

Download the Geeni app from the App Store or Google Play.

Screenshot: Geeni app on a smartphone showing the App Store/Google Play download buttons. Another screenshot shows the Geeni app interface with a search bar and app listings.

Register an Account

Create an account on your Geeni app to manage your devices.

1. Step 1: Enter your mobile phone number or email address.
2. Step 2: Enter the verification code sent to your phone and create a password.
3. Step 3: Log in to the app.

Screenshot: Geeni app registration screen asking for 'Country / Region' and 'Mobile number/E-mail', with a 'Next' button. Another screenshot shows the Geeni app verification screen asking for 'Verification code' and 'Please input password', with a 'Confirm' button.

Prepare the LED Strip

Measure the Area: Measure the area where you wish to attach the LED strip. Ensure the surface is clean and solid.

Measure and Cut the Strip: Measure the LED strip for the desired length, starting at the end closest to the Wi-Fi Controller connector. IMPORTANT: If you measure and cut from the opposite end, you will not be able to connect the LED strip to the Wi-Fi Controller. Each strip has cut markings located every 10cm. Take a sharp pair of scissors or blade, and cut along the cut mark.

Diagram: Shows a ruler with measurements 1-5. A section of the LED strip is depicted with marked cut points every 10cm. Scissors are shown cutting along one of these marks.

Add Device: Method 1: Easy Mode

1. In the Geeni app, on the top corner of the Devices screen, click the '+' button. Choose "Smart Lighting".
2. Power on the device and confirm that the indicator light is flashing quickly, indicating it's ready to connect. If not, turn the bulb off and on 3 times until it is flashing. Press "Next Step."

Screenshot: Geeni app interface showing 'No Devices' and a '+' button to add a device. Another screenshot shows a lightbulb icon indicating the device is ready, with a 'Next Step' button.

Add Device: Method 2: Backup AP Mode

1. Make sure the device is in AP Mode, blinking slowly (refer to reset instructions).
2. In the Geeni app, on the top corner of the Devices screen, click the '+' button. Choose "AP Mode" in the top corner. Choose "Smart Lighting".
3. Click "Next" and enter your Wi-Fi details.

Screenshot: Geeni app interface showing 'AP Mode' selected for adding a device. Another screenshot shows the interface for 'Configure Wi-Fi for the device' with a password field and Wi-Fi network selection.

Connecting to Wi-Fi

The Geeni app will attempt to connect your device. Ensure your phone and device are as close to your router as possible.

NOTE: Geeni can't connect to 5GHz networks. If the connection fails, try to connect using AP Mode.

Screenshot: Phone's Wi-Fi settings showing available networks like 'Merkury-XXXX' and 'Geeni-XXXX'. Another screenshot shows the Geeni app 'Connecting Now' screen with an 8% progress indicator and connection steps.

Troubleshooting

Cannot Connect to Your Wi-Fi Network

• Make sure you entered the correct Wi-Fi password during the Wi-Fi setup.
• Check for any Internet connection problems.
• If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

Device Appears Offline or Unreachable

• Make sure your Wi-Fi router is online and in range.
• Ensure you have the latest Geeni functionality by clicking "Check for firmware update" in your device settings.

Reset the Device

To reset the LED strip, press and hold the reset button for 3 seconds.

• Reset once (press & hold reset button) to reach Easy Mode, the primary connection method. The LEDs will flash quickly (2x per second).
• Reset again (press & hold reset button) to reach AP Mode, the backup connection method. The LEDs will blink slowly (every 3 seconds).

Diagram: Shows the Wi-Fi controller with a small button labeled 'Reset Button'. Instructions indicate 'Press: Turn On/Off' and 'Press & Hold: Reset'.

System Requirements & Technical Specifications

System Requirements

• Mobile device running iOS® 8 or higher or Android™ 4.1 or higher.
• Existing Wi-Fi Network.

Technical Specifications

• Size: 0.4in x 118in (1 cm x 300 cm)
• Power: 24W
• Input: 100-120V, 50/60Hz
• Weatherproof: IP44 (protects against splashes, not immersion)
• Wi-Fi: IEEE 802.11N, 2.4GHz (not compatible with 5GHz Wi-Fi networks)

What's in the Box

• Smart Wi-Fi LED Strip
• Wi-Fi Controller
• Power Adapter
• User Manual
• Voice Control Guide

Diagram: Shows the components included in the box: a flexible LED strip, a Wi-Fi controller box, and a power adapter.

Frequently Asked Questions

1. Can I share with family and friends?

Yes, you can share your devices with family and friends. In the Geeni app, go to the Profile section, click "Device Sharing", and you can grant or revoke permissions. The other user must have the Geeni app downloaded and an account registered.

2. Can I group multiple Geeni devices together?

Yes, you can group devices by room, location, or any other way you prefer. From your main device list, select a device, go to advanced settings (via the '...' button), and click "Create Group". You can then select devices to include and rename the group.

3. How Many Devices Can I Control?

The Geeni app can control an unlimited number of devices across unlimited locations. However, your Wi-Fi router may have a limit on the total number of connected devices.

4. My Geeni device has a funny name. How do I rename it?

From your main device list, select the device, press the '...' button for advanced settings, and click "Modify Device Name" (or "Modify Group Name" if applicable) to choose a more familiar name.

5. The device appears offline or unreachable, what should I do?

Ensure your Wi-Fi router is online and within range. Check for the latest Geeni functionality by clicking "Check for firmware update" in your device settings.

6. What's the Wireless Range?

The wireless range is heavily dependent on your home router and room conditions. Consult your router's specifications for exact range data.

7. If my Wi-Fi/Internet goes down, will Geeni still work?

No, Geeni products require a Wi-Fi connection to operate remotely.

Important Information & Warnings

CAUTION: RISK OF ELECTRIC SHOCK OR BURNS - USE IN A DRY LOCATION ONLY.

The weather-resistant IP44 rating protects the LED strip only from splashes in any direction. DO NOT IMMERSE IN WATER.

WARNING: The LED strip must be unplugged when making any modifications to the device. Electrical currents are dangerous and may cause electrical shock, injury, or death (in some cases).

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

Support & Legal

Support

If you encounter any issues, please contact us at support@mygeeni.com for help.

To explore our full selection of products, visit us at: www.mygeeni.com

(888) 232-3143 Toll-free (English Only)

Legal Information

© 2018 Merkury Innovations. 45 Broadway 3rd FL, New York NY 10006.

Geeni is a trademark of Merkury Innovations LLC.

iPhone, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Galaxy S is a registered trademark of Samsung Electronics Co., Ltd. Google, Google Play, and related marks and logos are trademarks of Google LLC. iOS is a registered trademark of Cisco in the U.S. and other countries and is used under license. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates. All other trademarks and trade names are those of their respective owners.

Made in China

The "WE CAN HELP" octagon graphic is replaced by this text. "DO NOT RETURN THIS PRODUCT TO THE STORE" is also presented as text.