Aerian AFT50 Tower Fan

Model: AFT50

Product Type: Tower Fan

Available in multiple languages: English, French, Dutch, Spanish, Portuguese.

Important Safety Warnings

Thank you for choosing the Aerian AFT50 Tower Fan. Please read the following safety instructions carefully before using the appliance and keep them for future reference.

Precautions

Battery Removal

The remote control operates with a supplied CR2025 lithium battery. This battery is accessible and can be replaced. When the remote control becomes unusable, it should be disposed of at a recycling center.

When disposing of the remote control, first remove the battery from its housing by following the instructions below:

  1. Push the release tab to the right.
  2. Keep the release tab pushed while pulling the battery holder out of the remote control.
  3. Remove the battery.
  4. Replace the battery holder in the remote control by pushing it until it clicks.
Diagram showing the remote control battery compartment. Step 1 indicates pushing a tab labeled 'POUSSER' (Push) towards 'OUVRIR' (Open). Step 2 indicates pulling out the battery holder. The battery is a CR2025 coin cell. The diagram shows the positive (+) side of the battery. The remote control has a label 'SN' and a compartment for the battery.

Assembly

DO NOT plug the fan into the mains socket until it is fully assembled.

  1. Remove the 3 screws from the lower part of the fan housing.
  2. Pass the power cord through the central hole of the base.
  3. Use the 3 screws to fix the base to the fan housing. Tighten the screws.
  4. Turn the control panel upwards and place the fan on a dry, flat surface before starting.

Operation

Control Panel

Diagram of the fan's control panel. It shows a display showing '8.8%', 'Hr', 'TIMER', 'SPEED'. There are buttons labeled 'Bouton du' (Mode Button), 'Bouton de flux d'a' (Airflow Mode Button), 'Bouton d'oscillation' (Oscillation Button), 'Bouton de vitesse' (Speed Button), and a general 'Bouton' (Button) which is likely the power button. The remote control is also shown with similar functions.
  1. Plug in the fan.
  2. Press the [power button] to turn the fan on. Press it again to turn off the fan.
  3. Press the [speed button] multiple times to select the desired fan speed. The display shows the corresponding speed: 1 – Low, 2 – Medium, 3 – High.
  4. Press the [oscillation button] to activate oscillation. The display shows the oscillation symbol. Press it again to deactivate oscillation.
  5. Press the [airflow mode button] multiple times to select the desired airflow mode: NORMAL – NATURAL – SLEEP.
    • When the display shows "NATURAL", the fan is in natural airflow mode.
    • When the display shows "SLEEP", the fan is in sleep airflow mode.
    • If no text is displayed, the fan is in normal airflow mode.

Timer Function

The TIMER allows for automatic shut-off.

  1. Press the [timer button] multiple times to set the timer from 1 to 8 hours in one-hour increments.
  2. Once the time elapses, the fan will stop automatically.
  3. To cancel the timer, press the [timer button] multiple times until no indicator is lit.

Remote Control Usage

The remote control buttons have the same functions as the corresponding buttons on the fan's control panel.

Diagram showing the remote control pointing towards the fan's sensor. The sensor is a small dark circle on the front of the fan unit.

Cleaning and Maintenance

Specifications

Nominal characteristics: 220-240 V~ 50 Hz 50 W

Description Symbol Value Unit
Maximum airflow of the fan F 24.8 m³/min
Input power of the fan P 37.3 W
Efficiency value Sv 0.66 (m³/min)/ W
Energy consumption in standby mode PSB 0.846 W
Energy consumption when off POFF - W
Sound power level of the fan LWA 54.0 dB(A)
Maximum air speed C 2.59 meters/second
Seasonal energy consumption Q 16.9 kWh/a

Measurement standard for efficiency value: IEC 60879:1986 (corr.1992)

Disposal and Recycling

As a responsible distributor, Aerian attaches great importance to environmental protection. We encourage you to follow the correct disposal procedures for your appliance, batteries, and packaging. This will help preserve natural resources and ensure it is recycled in an environmentally and health-friendly manner.

You must dispose of this product and its packaging according to local laws and regulations. As this product contains electronic components and sometimes batteries, the product and its accessories must be disposed of separately from household waste when the product reaches the end of its life.

For more information on disposal and recycling procedures, contact your local authorities. Bring the appliance to a local collection point for recycling. Some centers accept products free of charge.

Contact Information:

Darty France Hotline: For any breakdown and purchase location in France, before going to a Darty store, call 0 978 970 970 (price of a local call) 7 days a week, 24 hours a day.

Vanden Borre Hotline: After-sales service is available at +32 2 334 00 00, Monday to Friday from 8 am to 6 pm and Saturday from 9 am to 6 pm.

Recycling symbols are displayed. One shows a crossed-out wheeled bin with a symbol indicating waste separation. Another shows a plastic tray and film to be disposed of. A cardboard sleeve is shown to be recycled. A website address for local sorting guidelines is provided: WWW.CONSIGNESDETRI.FR.

Due to constant improvements and updates to our products, minor inconsistencies may appear in these instructions. We apologize for any inconvenience.

Etablissements Darty & fils ©, 129 Avenue Gallieni, 93140 Bondy, France 24/12/2019

Models: AFT50 Tower Fan, AFT50, Tower Fan, Fan

PDF preview unavailable. Download the PDF instead.

AERIAN M FR AFT50 iLovePDF