Owner's Manual for VOLTACON models including: LDN-T5-12016-FNW, LDN-T5-12027-FNW, LDN-T5-15018-FNW, LDN-T5-15026-FNW, LDN-T5-15037-FNW, LDN-T5 Series LED Tube Lights, LDN-T5 Series, LED Tube Lights, Tube Lights, Lights
LED Lights Online Store | Ledison Lighting | Voltacon UK
Euchips – Ledison Lighting
Merrytek Daylight Sensor Module – Ledison Lighting
Datasheet Version A Specification Product Name: T5 LED Tube lights ID Code: LDN-T5-15018-FNW LDN-T5-12016-FNW LDN-T5-12027-FNW LDN-T5-15026-FNW LDN-T5-15037-FNW Prepared Release date Audit 1/5 Approval Datasheet Version A Can work with most popular electronic ballasts, replacing existing fluorescent T5 lamps without any additional wiring; plug & play ; Glass cover & PC end-cap , with elegant appearance and comply with standard IEC 62776 Comply with CE certification Parking lots and covered car parks; Industry lighting and factory; Supermarket and retail store; School, hospital and office lighting; Product Name Product Model T5 LED Tube lights LDN-T5-12016-FNW T5 LED Tube lights LDN-T5-12027-FNW T5 LED Tube lights LDN-T5-15018-FNW T5 LED Tube lights LDN-T5-15026-FNW T5 LED Tube lights LDN-T5-15037-FNW Lamp Power/w 16 27 18.5 26 37 Flux/lm 2400 4100 2800 3950 5600 Efficiency of Lamp/(lm/w) 150 150 150 150 150 CCT/k 830 840 865 830 840 865 830 840 865 830 840 865 830 840 865 Ra Beam Angle/° 80 210 80 210 80 210 80 210 80 210 Item Input Voltage Frequency Power Factor Total Harmonic Distortion Color Consistency Lifetime(L70/B50) Ambient Temperature Range Storage Temperature IP Protection Symbol U f PF THD SDCM T Ta Ts - Unit Rated Value v 220-240 VAC Hz 50-60 - >0.9 % <20% - 4 h 50000 -20 ~ 50 -20 ~ 80 - IP20 2/5 Datasheet Version A C B A D Size A (Max) B (Min) B (Max) C (Max) D (Max) Cap 1200mm 1149 1153.7 1156.1 1163.2 Ø17 G5 1500mm 1449 1453.7 1456.1 1463.2 Ø17 G5 16W 27W 18.5W 26W 3/5 37W Datasheet Version A NO. Item Conditions 1 Temperature Cycle (TC) Temperature Humidity Bias 2 (THB) Ta = -20 °C ... 50 °C(transfer time 1 h, holding time 1 h switching time 34 min on / 34 min off) 1000h 40 °C / 93 % RH , 1000h 3 Operation Life Test (OLT) Ta = 25 , lighting up , 1000h 4 Accelerate Operation Life test (ALT) Ta = 60 , lighting up , 1000h 5 Switch Cycles (SC) 5s on / 5s off , 1000h (36000 cycles) 6 High Temperature Storage (HTS) Ta=80, 1000h Low Temperature Storage 7 (LTS) Ta=-20, 1000h Ta = -40 °C ... 125 ° Soak time: 15 min or longerTransfer time: 8 Thermal Shock (TS) 20 s or shorter 50h 9 Vibration and Drop Test (with packaging) 10 ~ 200 /5 min, 3G, X Y Z each 30min; 10 Kg105 , 10 Kg 76 ; from 6 sides; Size 1200mm 1500mm QTY/CTN 25 25 N.W. 0.17kg 0.19kg G.W. 6.25kg 7.5kg CTN Dimension 1218*152*158mm 1518*152*158mm 4/5 Datasheet Version A ECG Compatible Installation Instructions: ECG Fluorescent Tube ECG LED Tube 1. Switch off electricity; 2. Detach the conventional lamp from the fitting by turning 90°; 3. Remove the conventional lamp; 4. Insert the LED Tube into the lamp fitting; 5. Secure it in position by turning 90°; 6. Switch on electricity. 1. Lamps are not to be used in wet conditions or in a luminaire that don't provide protection; 2. Lamps are not designed to suit for emergency and dimming fixture operation; 3. This LED Tube is compatible with warm start ballast; 4. Please refer to the list of compatible ballast before installation; 5. Please contact manufacture to ensure anything unconfirmed. 5/5