Fridja f900 Automatic Citrus Juicer

Welcome

Thank you for purchasing the Fridja f900 automatic citrus juicer. This product is designed and manufactured to provide years of trouble-free service at home and while travelling. Please read these instructions carefully before use to ensure you get the best experience from your purchase.

Contact Us

Fridja is proud of its new automatic juicer and aims for complete customer satisfaction. For any assistance, please contact us at info@fridja.com. For full video instructions, please visit our YouTube channel.

Technical Specifications

Model Number: f900
Gross Weight: 1950g
Input Voltage: 220-240 V 50/60 Hz
Output Power: 50W
Instruction Booklet Version: 1.1

Safety Instructions

Please retain these instructions for future reference. Use the appliance only as described in this manual to prevent fire or electric shock. Do not use the appliance for any purpose other than its intended design.

Always follow basic safety precautions when using electrical appliances. Verify that the voltage indicated on the rating plate matches your local mains power supply. This product complies with all applicable CE labelling directives.

If the supply cord is damaged, it must be replaced by a qualified engineer to avoid hazards. Ensure the supply cord is kept away from heat or sharp edges that could cause damage.

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they are supervised and instructed by a person responsible for their safety. Do not leave the appliance unattended while connected to the mains power supply. Supervise children to ensure they do not play with the appliance.

Caution: Keep all packaging materials away from children, as they can be a suffocation hazard.

Do not allow the appliance or its power cord to touch hot surfaces or come into contact with heat sources. When removing the plug from the wall socket, never pull the power cord. Do not let the power cord hang freely.

To avoid the risk of electric shock, do not clean the base with liquids or immerse it.

This appliance is intended for domestic use only.

Always remove the plug from the wall socket before assembling, disassembling, or cleaning the appliance.

Your Fridja Juicer

This section describes the components of the Fridja f900 Automatic Citrus Juicer:

Main Unit Components:

• 1. Max Marking: Indicates the maximum fill level.
• 2. Lid Lock: Secures the lid in place.
• 3. Juice Outlet: Where the juice exits the juicer.
• 4. Reset Button: Used to reset the motor or spindle.
• 5. Start Button: Initiates the juicing process.
• 6. On/Off Switch: Powers the appliance on or off.
• 7. Base: The main body of the juicer containing the motor.

Detachable Parts:

• 8. Drive Shaft: Connects to the motor.
• 9. Drive Stem: Fits onto the drive shaft.
• 10. Juice Container: Collects the juice.
• 11. Hinge Opener: Mechanism to open the lid hinge.
• 12. Pulp Sieve: Separates pulp from the juice.
• 13. Juicer Dome: The part the citrus half is placed on.
• 14. Lid: Covers the juicer during operation.
• 15. Lid Insert: A component of the lid.

How to Assemble

For a video guide, scan the QR code or visit: https://www.youtube.com/c/Fridja.

[QR Code for assembly video instructions]

Carefully unpack all parts. Before first use, clean the juicer as described in the "Cleaning and Care" section.

1. Fit the drive stem onto the drive shaft on the base. Close the lid and ensure it locks into place. All parts must be completely dry.
2. Fit the juice container, aligning the [downward arrow] and open padlock symbols.
3. Fold the juice outlet upwards.
4. Lock the juice container by turning it clockwise until the [downward arrow] and closed padlock symbols align and it locks into place. If the container moves during operation, it is not locked correctly. Switch off the appliance, lock the container properly, and continue.
5. Fit the pulp sieve onto the juice container.
6. Fit the juicer dome over the pulp sieve and onto the drive shaft.
7. Fit the lid insert into the lid and push down firmly until it clicks.
8. Push the hinge opener on the juice container down and fit the lid into the hinge.
9. Place a suitable container under the juice outlet and fold the outlet down. The base has a power-cord storage compartment.
10. Connect the appliance to the mains. The juicer is ready for use.

How to Operate

For a video guide, scan the QR code or visit: https://www.youtube.com/c/Fridja.

[QR Code for operation video instructions]

1. Cut citrus fruit in half and place one half onto the juicer dome with the cut section facing downwards.
2. Close the lid and ensure it locks into place.
3. Use the On/Off switch to turn the appliance on. A beep signal will sound, and the 'Start' button will light up.
4. Press the 'Start' button until a beep signal is heard.
5. The fruit will be pushed up, juice extracted, and the fruit lowered again. Juice collects in the container.
6. Wait for the motor to come to a complete standstill before opening the lid. Remove fruit residue and place a new fruit half on the dome.
7. When juicing larger quantities, empty the pulp sieve as needed.
8. When juicing larger fruits (e.g., grapefruit), ensure the Max marking is not exceeded. Fold down the juice outlet early if necessary.
9. After use, fold the juice outlet up and switch the appliance off.
10. Remove the plug from the wall outlet and clean the appliance. The base includes power-cord storage.

Cleaning and Care

For a video guide, scan the QR code or visit: https://www.youtube.com/c/Fridja.

[QR Code for cleaning video instructions]

Clean all detachable parts with hot water and mild detergent immediately after use.

Dishwashers are not recommended. The juicer is designed for longevity; dishwasher heat can warp plastic parts and shorten its lifespan. Please hand wash the juicer.

Troubleshooting

Plug Safety

The appliance is fitted with a 13 amp plug. If the fuse needs changing, use a 13 amp ASTA approved (BS 1363) fuse. If the plug needs replacement, follow these steps:

Mains lead wire colours:

• Green and yellow wire: Connect to the terminal marked "E", the Earth symbol, or the green and yellow terminal. Never connect Neutral or Live to the earth terminal.
• Blue or black wire: Connect to the terminal "N". Never connect Earth or Live to the Neutral terminal.
• Never connect Earth or Neutral to the Live terminal.

Ensure no cut or stray wire strands are present and the cord clamp is secure over the outer sheath. Consult a qualified engineer if unsure.

If your appliance has a non-rewireable plug and the fuse needs replacing, use an ATSTA approved fuse (BS1362) of the same rating. Consult an electrician if unsure.

To remove the plug: DISCONNECT FROM MAINS, cut the mains lead, and dispose of it safely. Never attempt to re-use the plug or insert it into a socket outlet due to the risk of electric shock.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

This marking on the product, accessories, or literature indicates that it and its electronic accessories should not be disposed of with household waste at the end of their working life. To prevent harm to the environment or human health from uncontrolled waste disposal, separate these items from other waste and recycle them responsibly to promote sustainable reuse of material resources.

Household users should contact their retailer or local government office for details on environmentally safe recycling locations and methods. Business users should contact their supplier and check purchase contract terms. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

[Symbol indicating recycling/waste disposal]

Guarantee

This guarantee applies to goods bought directly from Fridja. If purchased from another vendor, please contact them.

If you are unhappy with your purchase, contact Fridja within seven days of delivery for a refund. Returned items must be in unused condition with all supplied accessories and packaging. You are responsible for the condition of goods until they reach Fridja; pack items carefully to prevent transit damage. Worn, damaged, or incomplete returns are not eligible for refund and will be returned.

All goods are supplied with a 12-month warranty from the date of purchase, covering defects in materials and workmanship under normal use and maintenance. If a fault develops within this period, Fridja will repair or replace the item. If this is not possible, the actual purchase price will be refunded. If goods become defective within three months of delivery, Fridja will cover collection and replacement delivery costs. After three months, customers are responsible for collection costs.

If goods arrive damaged, inform Fridja within 24 hours of delivery with photos. Claims will be assessed, and if approved, goods will be collected for replacement or refund.

It is your responsibility to securely package items for return using a trackable service; failure to do so will void the warranty.

To arrange a return, contact: info@fridja.com.

This guarantee is subject to the following provisions:

• The product must be correctly installed and operated according to these instructions.
• This guarantee does not cover accidental damage or misuse.
• This guarantee is void if the product is resold or damaged by inexpert repairs. Manufacturers disclaim liability for incidental or consequential damages.

This guarantee is in addition to, and does not diminish, your statutory or legal rights.