Safety Data Sheet

According to the rules for safety data sheet of the Global Harmonized System (GHS)

Revision Date: 02/28/2015

Supplier: Shanghai SAN-XIN INSTRUMENTATION, INC.

Product: PASCO# 699-195 PH ELECTRODE XL RNG 0-12

Section 1: Identification of the Product and Company

PASCO Item #(s) and Description(s): PASCO# 699-195 PH ELECTRODE XL RNG 0-12

Chemicals Contained: Potassium Chloride Solution

Intended use of the chemicals: pH/ORP Combination Electrode Soaking Solution

Supplier Name: Shanghai SAN-XIN Instrumentation Inc.

Address: 3F, Building No.471 Guiping Road, Shanghai China 200233

Contact: sanxin@shsan-xin.com | Tel: (86-21)63362480 | Fax: (86-21)64956880

Section 2: Hazard Identification

Non-hazardous product as specified in Directives 67/548/EEC.

Non-hazardous product as specified in OSHA regulation 29 CFR 1910.1200.

Section 3: Composition and Component Information

%CHEMICAL NAME(S)
30%Potassium Chloride
70%Water

Section 4: First Aid Measures

After Inhalation: Remove to fresh air. Call a physician if breathing becomes difficult.

After Skin Contact: Wash affected area with water and soap.

After Eye Contact: Rinse out with plenty of water for at least 15 minutes. If pain persists, summon medical advice.

After Swallowing: Wash out mouth with plenty of water, provided person is conscious. Obtain medical attention if feeling unwell.

Section 5: Fire-Fighting Measures

Suitable Extinguishing Media: Water Spray, Foam, Dry Powder, Carbon Dioxide.

Special Risks: Non-combustible. Development of hazardous combustion gases or vapors possible in the event of fire.

Special Protective Equipment: Do not stay in dangerous zone without suitable chemical protection clothing and self-contained breathing apparatus.

Section 6: Accidental Release Measures

Personal precautions: None.

Environmental Precautions: None.

Additional Notes: None.

Section 7: Handling and Storage

Handling: No Restrictions.

Storage: Keep container closed and protected from direct sunlight. Store at room temperature (+15 to +25°C).

Section 8: Exposure Control/Personal Protection

Engineering: Maintain general industrial hygiene practice.

Personal Productive Equipment: As appropriate to quantity handled.

Respiratory Protection: Required when vapors/aerosols are generated.

Protective Gloves: Rubber or plastic.

Eye Protection: Goggles or face mask.

Industrial Hygiene: Change contaminated clothing. Wash hands after working with substance.

Section 9: Physical/Chemical Properties

Appearance: Colorless liquid

Odor: Odorless

pH: 5.5-8

Boiling point: >100°C

Melting Point: NA

Specific Gravity: 1.00

Solubility: Soluble

Thermal Decomp.: NA

Explosion Limit: NA

Flash Point: NA

Section 10: Stability and Reactivity

Conditions to be avoided: Heating.

Hazardous Decomposition Products: See section 5.

Hazardous Polymerization: Will not occur.

Substances to be avoided: The generally known reaction partners of water.

Further Information: Not available.

Section 11: Toxicological Information

Product Toxicity: Quantitative data on the toxicity of this product is not available.

Potential Health Effects: Hazardous properties can't be excluded, but are relatively because of the low concentration of the dissolved substances, when the product is handled appropriately. The product should be handled with the usual care when dealing with chemicals.

Component Toxicity: Acute Toxicity: Not Available. Chronic Toxicity: Not Available. Additional Data: Not Available.

Section 12: Ecological Information

Quantitative data on the ecological effect of the product is not available.

Further Data: No ecological problems are to be expected when the product is handled and used with due care and attention.

Section 13: Disposal Considerations

Waste Disposal: Can be safely disposed of as ordinary refuse.

Section 14: Transportation Information

Land: Not subject to transport regulations.

Sea: Not subject to transport regulations.

Air: Not subject to transport regulations.

Section 15: Regulatory Information

Labeling according to the rules for the safety data sheet of the Global Harmonized System (GHS).

Non-hazardous according to EC Directives 67/548/EEC.

Section 16: Other Information

Revision Date: 02/28/2015

Supersedes edition of: MSDS Sheet.

Reason for revision: OSHA has set deadlines (by 06/01/2015) for the implementation of the newly required SDS (Safety Data Sheets) replacing the old MSDS (Material Safety Data Sheets).

Disclaimer: THE INFORMATION CONTAINED HEREIN IS BASED ON THE PRESENT STATE OF OUR KNOWLEDGE. IT CHARACTERIZES THE PRODUCT WITH REGARD TO THE APPROPRIATE SAFETY PRECAUTIONS. IT DOES NOT REPRESENT A GUARANTEE OF THE PROPERTIES OF THE PRODUCT.

PDF preview unavailable. Download the PDF instead.

PS-2102-SDS-FILL-SOLN-4M-KCLSAT-AG--699-195 Acrobat Distiller 9.0.0 (Windows)

Related Documents

Preview PASCO PS-2102 pH Sensor: Setup, Usage, and Maintenance Guide
Comprehensive guide to the PASCO PS-2102 pH Sensor, covering setup, connecting components, collecting data, software usage with SPARKvue and PASCO Capstone, maintenance, and technical support.
Preview PASCO PASPORT pH Sensor PS-2102: Instruction Sheet and Guide
User manual and technical guide for the PASCO PASPORT pH Sensor (PS-2102). Learn about setup, quick start, calibration procedures using SPARKvue and PASCO Capstone, electrode maintenance, specifications, and technical support from PASCO scientific.
Preview PASCO PS-2102 Датчик pH: Инструкции и спецификации
Подробные инструкции, руководство по настройке, калибровке и технические характеристики для датчика pH PASCO PS-2102.
Preview Master Materials and Equipment List - Biology Through Inquiry
Comprehensive list of materials and equipment required for laboratory activities in the Biology Through Inquiry curriculum by PASCO. Includes part numbers, quantities, and usage details for sensors, probes, and other scientific apparatus.
Preview PASCO SPARKlink PS-2009A Instruction Sheet: Connecting and Using the Sensor Interface
This instruction sheet provides details on connecting and using the PASCO SPARKlink (PS-2009A), a sensor interface for educational and scientific data acquisition, including setup, sensor connection, and technical support information.
Preview PASCO PS-3211 Wireless Voltage Sensor Battery Replacement Guide
Step-by-step instructions for replacing the battery in the PASCO PS-3211 Wireless Voltage Sensor, including battery identification, required tools, and safety guidelines.
Preview PASCO Wireless Voltage Sensor PS-3211A: Product Manual and User Guide
Comprehensive product manual for the PASCO Wireless Voltage Sensor (PS-3211A). Learn about its features, setup, software integration with SPARKvue and PASCO Capstone, troubleshooting, and technical specifications. This guide covers connecting the sensor via Bluetooth or USB, collecting voltage measurements, and essential product information.
Preview PASCO Wireless Motion Sensor (PS-3219) Product Guide
Comprehensive guide to the PASCO Wireless Motion Sensor (PS-3219), covering hardware, setup, operation, troubleshooting, and specifications for educational and laboratory use.